New progress on summer build with pics

gotn20 · June 8th, 2008, 06:51 PM

Well guys I just couldnt stand to let my car sit all summer as I save up for a 347 shortblock for woody. I have trick flow 205cc cnc heads that I'm waiting to put on my new motor. And after 180,000 miles and 30+ bottles of nitrous my motor finaly gave up. The funny part was I hadn't sprayed it in 5 weeks when it blew and there was no signs of the car ever going lean. Any guesses?

Any ways I bought my friends stock rotating assembly and b cam and erson cam 1.6 rockers for 200 bucks. Did new rings and bearings, chain and oil pump and he was nice enough to let me use his heads. We can't figure out what they are. There Iron they say windsor, they have bigger ports and valves than my stocks and they have multiple bolt patterns for headers.

I Know they made a big ass differnce on his car so I'm hoping for the same. Any way's I know it's not the best but it's better than my all stock motor lol. And it's just for the summer till I get my short block to my heads on. Here's some pics of the final product.

All I have to do Is hook the small shit and hope she pops off consedering this is my first rebuild I've done. Let me know what you guys think and be gentle I'm a rookie

83fox · June 8th, 2008, 07:50 PM

you have one hell of a nice friend haha

the motor looks really good.
what intake are you using?

and to find out exactly what windsor heads, get the serial number off of them and someone here could tell you what they are exactly.

gotn20 · June 9th, 2008, 01:58 PM

I don't see any serial numbers on them nobody has a guess as to what kind of heads these are ?

Iownastang · June 9th, 2008, 02:42 PM

Originally Posted by gotn20

I don't see any serial numbers on them nobody has a guess as to what kind of heads these are ?

look on the very front of them, im guessing they might be world products windsor jr heads, with a 180cc intake runner and 1.94 1.60 valves but i do not recall if my windsor sr's had windsor stamped in the rocker valley.

The number on them would be on the front of the head kind of in the middle but you might haft to scrape the paint off the find it though b/c it is just scribed on there its not stamped.

ryans88gt · June 9th, 2008, 02:52 PM

They are Windsor Jrs. An aftermarket head from World products

Windsor Jr. & Sr. High Performance 302 351 5.0 Small Block Ford Cylinder Heads

Pretty good heads...not the best...but better than stock by far.

Iownastang · June 9th, 2008, 02:55 PM

Originally Posted by ryans88gt

They are Windsor Jrs. An aftermarket head from World products

Windsor Jr. & Sr. High Performance 302 351 5.0 Small Block Ford Cylinder Heads

Pretty good heads...not the best...but better than stock by far.

Thats what i thought b/c i have windsor sr's on my 347

gotn20 · June 9th, 2008, 03:42 PM

So you guys think It'll run decent?The motor will be fresh and I'll still be running the 150 shot, I just bought some bbk equal lenghts, wich will complete my exhaust,as i all ready have catless h and slp cat back. I also did a king cobra clutch and I all ready have 3.73's. Next I'm gunna order the trick flow track heat r manifold with the nitrous manifold spacer. I think this will be a fun set up for the summer but I can't wait to order my short block and put my trickflow 205's on. What do you guys think made that piston do that? There was a chunk missing out the side and the whole top ring was gone through the heads lol. I was just cruising down the high way and boom lol Thanks for the replys guys

Iownastang · June 9th, 2008, 03:47 PM

Originally Posted by gotn20

So you guys think It'll run decent?The motor will be fresh and I'll still be running the 150 shot, I just bought some bbk equal lenghts, wich will complete my exhaust,as i all ready have catless h and slp cat back. I also did a king cobra clutch and I all ready have 3.73's. Next I'm gunna order the trick flow track heat r manifold with the nitrous manifold spacer. I think this will be a fun set up for the summer but I can't wait to order my short block and put my trickflow 205's on. What do you guys think made that piston do that? There was a chunk missing out the side and the whole top ring was gone through the heads lol. I was just cruising down the high way and boom lol Thanks for the replys guys

You will be on the upper side of 450 flywheel hp.

flattusmaximus78 · June 9th, 2008, 04:40 PM

Your prob ganna be making around 270 and 300 tq all motor with the spray prob like 370+ hp and a shit ton of torque. Prob well over 400.

Iownastang · June 9th, 2008, 04:46 PM

Originally Posted by flattusmaximus78

Your prob ganna be making around 270 and 300 tq all motor with the sprahy prob like 370+ hp and a shit ton of torque. Prob well over 400.

270 ON MOTOR?? YOU ARE CRAZY.

He will be making well over 300 on motor.

Pssss. to let you in on a little secret foxes came from the factory with 300 lb ft of torque.

Iownastang · June 9th, 2008, 04:49 PM

Originally Posted by gotn20

Well guys I just couldnt stand to let my car sit all summer as I save up for a 347 shortblock for woody. I have trick flow 205cc cnc heads that I'm waiting to put on my new motor. And after 180,000 miles and 30+ bottles of nitrous my motor finaly gave up. The funny part was I hadn't sprayed it in 5 weeks when it blew and there was no signs of the car ever going lean. Any guesses?

Any ways I bought my friends stock rotating assembly and b cam and erson cam 1.6 rockers for 200 bucks. Did new rings and bearings, chain and oil pump and he was nice enough to let me use his heads. We can't figure out what they are. There Iron they say windsor, they have bigger ports and valves than my stocks and they have multiple bolt patterns for headers.

btw those look to be harland sharp rr;s

gotn20 · June 9th, 2008, 05:39 PM

ha ha yeah my friend says he orderd harland sharps but when he got em the retainers say erson cams. Are they good rockers?

Iownastang · June 9th, 2008, 06:31 PM

Originally Posted by gotn20

ha ha yeah my friend says he orderd harland sharps but when he got em the retainers say erson cams. Are they good rockers?

Oh yes they are great rockers.

flattusmaximus78 · June 10th, 2008, 09:37 AM

you asked for an opinion and you got one. I say 260-280 cause your cam.

rockybalboa · June 10th, 2008, 10:13 AM

Originally Posted by gotn20

I don't see any serial numbers on them nobody has a guess as to what kind of heads these are ?

look like some windsor jrs

Nice 5.0 · June 10th, 2008, 07:24 PM

Originally Posted by flattusmaximus78

Your prob ganna be making around 270 and 300 tq all motor with the spray prob like 370+ hp and a shit ton of torque. Prob well over 400.

I have a very similar setup to him and I made 270hp and 310tq to the wheels. My setup is windsor jr's, e-cam, edelbrock performer intake, shorties, h-pipe,and 373's.

June 8th, 2008, 06:51 PM	#1
gotn20 Atomized Join Date: Feb 2008 Posts: 1,370 iTrader: 0 reviews	New progress on summer build with pics Well guys I just couldnt stand to let my car sit all summer as I save up for a 347 shortblock for woody. I have trick flow 205cc cnc heads that I'm waiting to put on my new motor. And after 180,000 miles and 30+ bottles of nitrous my motor finaly gave up. The funny part was I hadn't sprayed it in 5 weeks when it blew and there was no signs of the car ever going lean. Any guesses? Any ways I bought my friends stock rotating assembly and b cam and erson cam 1.6 rockers for 200 bucks. Did new rings and bearings, chain and oil pump and he was nice enough to let me use his heads. We can't figure out what they are. There Iron they say windsor, they have bigger ports and valves than my stocks and they have multiple bolt patterns for headers. I Know they made a big ass differnce on his car so I'm hoping for the same. Any way's I know it's not the best but it's better than my all stock motor lol. And it's just for the summer till I get my short block to my heads on. Here's some pics of the final product. All I have to do Is hook the small shit and hope she pops off consedering this is my first rebuild I've done. Let me know what you guys think and be gentle I'm a rookie

June 9th, 2008, 02:52 PM	#5
ryans88gt MM Fanatic Join Date: May 2007 Location: Bloomington, IL Posts: 4,737 iTrader: 0 reviews	They are Windsor Jrs. An aftermarket head from World products Windsor Jr. & Sr. High Performance 302 351 5.0 Small Block Ford Cylinder Heads Pretty good heads...not the best...but better than stock by far. __________________ 88 GT CHI headed 351w 10.8 @ 125 - still figuring it out. 03 Cobra 2.3 whipple 10.7 @ 129 - sold it 04 Mach 1 12.7 @ 109 mostly stock - sold it 89 LX procharged 302 515 hp 497 ftlbs 10.7 @130 mph - sold it

June 9th, 2008, 04:40 PM	#9
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,122 iTrader: 3 reviews	Your prob ganna be making around 270 and 300 tq all motor with the spray prob like 370+ hp and a shit ton of torque. Prob well over 400. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

June 10th, 2008, 09:37 AM	#14
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,122 iTrader: 3 reviews	you asked for an opinion and you got one. I say 260-280 cause your cam. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

Threads Similar to: New progress on summer build with pics
Thread	Thread Starter	Forum	Replies	Last Post
Progress With My New Build...	Green Hornet	Modular Mustangs	148	October 21st, 2008 11:12 PM
Progress pics	Iownastang	5.0 Mustangs	21	May 24th, 2008 10:30 PM
Progress pics	Iownastang	The Clubhouse	0	May 23rd, 2008 11:04 PM
pics of progress	jrh_1980	5.0 Mustangs	2	April 14th, 2008 08:43 AM
MOTOR BUILD IN PROGRESS	83five0	5.0 Mustangs	20	May 13th, 2007 06:36 PM

June 8th, 2008, 07:50 PM	#2
83fox Enthusiast 1983 mustang lx Join Date: Apr 2008 Posts: 504 iTrader: 0 reviews	you have one hell of a nice friend haha the motor looks really good. what intake are you using? and to find out exactly what windsor heads, get the serial number off of them and someone here could tell you what they are exactly.

June 9th, 2008, 01:58 PM	#3
gotn20 Atomized Join Date: Feb 2008 Posts: 1,370 iTrader: 0 reviews	I don't see any serial numbers on them nobody has a guess as to what kind of heads these are ?

June 9th, 2008, 03:42 PM	#7
gotn20 Atomized Join Date: Feb 2008 Posts: 1,370 iTrader: 0 reviews	So you guys think It'll run decent?The motor will be fresh and I'll still be running the 150 shot, I just bought some bbk equal lenghts, wich will complete my exhaust,as i all ready have catless h and slp cat back. I also did a king cobra clutch and I all ready have 3.73's. Next I'm gunna order the trick flow track heat r manifold with the nitrous manifold spacer. I think this will be a fun set up for the summer but I can't wait to order my short block and put my trickflow 205's on. What do you guys think made that piston do that? There was a chunk missing out the side and the whole top ring was gone through the heads lol. I was just cruising down the high way and boom lol Thanks for the replys guys

June 9th, 2008, 05:39 PM	#12
gotn20 Atomized Join Date: Feb 2008 Posts: 1,370 iTrader: 0 reviews	ha ha yeah my friend says he orderd harland sharps but when he got em the retainers say erson cams. Are they good rockers?

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 05:51 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.