5.0 vs 5.1 Stroker

Modified88Dreamer · June 10th, 2008, 08:34 PM

Does anyone know anything about the 5.1? Does anyone have it and in a race (if it was the same driver for both vehicle) which would have the advantage? I didn't even realize they made a 5.1. I know I probably sound like Demello, but this is actually something I'm curious about. Thanks in advance!

ThreeHonks302 · June 10th, 2008, 08:39 PM

The 5.1 is basically suppossed to just be a 306, which is just a stock 302 bored .030" over. Did you see the 5.1 badge on 50resto? lol

Modified88Dreamer · June 10th, 2008, 08:41 PM

Originally Posted by ThreeHonks302

The 5.1 is basically suppossed to just be a 306, which is just a stock 302 bored .030" over. Did you see the 5.1 badge on 50resto? lol

ThreeHonks302 · June 10th, 2008, 08:49 PM

yea its kinda pointless as you can see... idk who would put a 5.1 badge on their car for a 306

Modified88Dreamer · June 10th, 2008, 08:52 PM

Does the stroker kit work with a 5.0 block? Its mainly made for the 4.6L right?

ThreeHonks302 · June 10th, 2008, 08:56 PM

yea i believe there is an actual stroker kit for the 4.6s but it still brings the cubic inch count to somewhere around 302 (idk why the 5.0 badge is not good enough lol). There is no 5.1 stroker kit for the 5.0 pushrod block though ( tell me the truth, i know you wanna stroke your 88 out to a 5.1!!) lol

Iownastang · June 10th, 2008, 08:57 PM

Originally Posted by ThreeHonks302

yea i believe there is an actual stroker kit for the 4.6s but it still brings the cubic inch count to somewhere around 302 (idk why the 5.0 badge is not good enough lol). There is no 5.1 stroker kit for the 5.0 pushrod block though ( tell me the truth, i know you wanna stroke your 88 out to a 5.1!!) lol

They make 5.1 strokers kits for mod motors. That is what the badge is for.

Iownastang · June 10th, 2008, 09:01 PM

Originally Posted by Modified88Dreamer

Does the stroker kit work with a 5.0 block? Its mainly made for the 4.6L right?

What do you mean does it work with the 5.0 block? A 4.6 stroker kit is made for a 4.6 not a 5.0 they are completely different blocks.

And 302 stroker kits are made for 302's not modular motors.

I am not trying to be mean but i dont see why you guys ask some of the questions you do .

Modified88Dreamer · June 10th, 2008, 09:02 PM

Originally Posted by ThreeHonks302

yea i believe there is an actual stroker kit for the 4.6s but it still brings the cubic inch count to somewhere around 302 (idk why the 5.0 badge is not good enough lol). There is no 5.1 stroker kit for the 5.0 pushrod block though ( tell me the truth, i know you wanna stroke your 88 out to a 5.1!!) lol

Originally Posted by Iownastang

They make 5.1 strokers kits for mod motors. That is what the badge is for.

Thats what I figured, I've just never seen one, heard one, or hear anyone talk about one. (Engine that is)

Modified88Dreamer · June 10th, 2008, 09:06 PM

Originally Posted by Iownastang

What do you mean does it work with the 5.0 block? A 4.6 stroker kit is made for a 4.6 not a 5.0 they are completely different blocks.

And 302 stroker kits are made for 302's not modular motors.

I am not trying to be mean but i dont see why you guys ask some of the questions you do .

I just thought for some odd reason it might have worked with it. Thats all. I know it would be dumb to add a stroker to the engine and only gain .1 ci thats just dumb lol

Iownastang · June 10th, 2008, 09:12 PM

Originally Posted by Modified88Dreamer

I just thought for some odd reason it might have worked with it. Thats all. I know it would be dumb to add a stroker to the engine and only gain .1 ci thats just dumb lol

.1 liters 4 ci inches See there is no way you could stroke the motor it would still haft to be a 3 in stroke crank, 5.090 rods and 4.030 bore. That would not be stroking the motor that would be boring the motor .030

Modified88Dreamer · June 10th, 2008, 09:20 PM

Originally Posted by Iownastang

.1 liters 4 ci inches See there is no way you could stroke the motor it would still haft to be a 3 in stroke crank, 5.090 rods and 4.030 bore. That would not be stroking the motor that would be boring the motor .030

Ahhh Gotcha! Well, looks like I learned a little bit of something today

June 10th, 2008, 08:34 PM	#1
Modified88Dreamer Enthusiast Nowhere to be found Join Date: Nov 2006 Location: Moving back home to Florida Posts: 630	5.0 vs 5.1 Stroker Does anyone know anything about the 5.1? Does anyone have it and in a race (if it was the same driver for both vehicle) which would have the advantage? I didn't even realize they made a 5.1. I know I probably sound like Demello, but this is actually something I'm curious about. Thanks in advance! __________________ Well, guys its been real and its been fun, but it hasn't been real fun for me the past 3 months. Money has been tight and need to cancel my cable service to save what I can. I hope to chat with ya'll in 6-7 months from now. Bye!

June 10th, 2008, 08:52 PM	#5
Modified88Dreamer Enthusiast Nowhere to be found Join Date: Nov 2006 Location: Moving back home to Florida Posts: 630	Does the stroker kit work with a 5.0 block? Its mainly made for the 4.6L right? __________________ Well, guys its been real and its been fun, but it hasn't been real fun for me the past 3 months. Money has been tight and need to cancel my cable service to save what I can. I hope to chat with ya'll in 6-7 months from now. Bye!

Threads Similar to: 5.0 vs 5.1 Stroker
Thread	Thread Starter	Forum	Replies	Last Post
4.6 stroker	01sta1k3r	99-04	6	May 5th, 2008 08:17 PM
4.2l stroker	Stang6899	V6 Mustangs	25	January 15th, 2008 09:22 AM
To Stroker or Not to Stroker? That is the Question!	87StangLX	Poweradders	13	October 20th, 2007 11:46 AM
Stroker.	JSapit	Engine	34	August 9th, 2007 12:43 AM
No More Stroker =(	itschristorres8	V6 Mustangs	155	November 22nd, 2006 09:09 PM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

June 10th, 2008, 08:39 PM	#2
ThreeHonks302 Regular 1986 Mustang GT Join Date: Jan 2008 Location: Michigan Posts: 284	The 5.1 is basically suppossed to just be a 306, which is just a stock 302 bored .030" over. Did you see the 5.1 badge on 50resto? lol

June 10th, 2008, 08:49 PM	#4
ThreeHonks302 Regular 1986 Mustang GT Join Date: Jan 2008 Location: Michigan Posts: 284	yea its kinda pointless as you can see... idk who would put a 5.1 badge on their car for a 306

June 10th, 2008, 08:56 PM	#6
ThreeHonks302 Regular 1986 Mustang GT Join Date: Jan 2008 Location: Michigan Posts: 284	yea i believe there is an actual stroker kit for the 4.6s but it still brings the cubic inch count to somewhere around 302 (idk why the 5.0 badge is not good enough lol). There is no 5.1 stroker kit for the 5.0 pushrod block though ( tell me the truth, i know you wanna stroke your 88 out to a 5.1!!) lol

All times are GMT -4. The time now is 04:39 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.