| Home | Register | FAQ | Members List | Calendar | Blogs | Garage | Gallery | Search | Today's Posts | Mark Forums Read |
| | |||||||||||
| ||||||||||||
|
|||||||
Discussing 5.0 Engine Tech And Specifications in the 5.0 Mustangs Forum. Modded Mustangs 5.0L Engine Tech. Specs ENGINE EXPLOSION CYLINDER HEAD TORQUE SEQUENCE TIMING AND ... Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free! |
|
|
LinkBack | Thread Tools |
June 21st, 2008, 05:07 PM
|
#1 |
|
I Post Entirely Way Too Much
1990 Mustang LX Turbo
8.67@165.91 mph
Join Date: Oct 2006
Location: Hidden In NY
Posts: 8,476
|
5.0 Engine Tech And SpecificationsENGINE EXPLOSION  CYLINDER HEAD TORQUE SEQUENCE  TIMING AND FIRING SEQUENCE 
__________________
Wiring Diagrams, TSB's, OBD Service Codes and Engine Diagrams Available. PM For Info Myspace Small Block Posse |
|
June 27th, 2008, 05:19 PM
|
#4 |
|
Regular
1989 Mustang LX
10.98@126.7 NA
Join Date: Feb 2008
Location: N.E. Ohio
Posts: 496
|
This is useful stuff, even for the ones who do it all the time. I have print outs of similar charts that I laminate and keep on the side of my roll around tool chest. If you were to add a bolt torque chart, an intake manifold torque sequence chart and an ARP fastener torque chart, you would have a fairly comprehensive engine assembly must have spec article.
__________________
 Never fast enough.
|
|
July 4th, 2008, 03:30 PM
|
#5 |
|
Newbie
1995 Ford Mustang GT
Join Date: Jan 2007
Location: Virginia Beach
Posts: 21
|
very good info. definately going to keep my eyes on it.
__________________
1995 Ford Mustang GT 1999 Ford Explorer XLT/2002 Nissan Sentra SE-R Military Crew - YNSA, USN |
|
July 6th, 2008, 03:30 PM
|
#6 |
|
Enthusiast
89 GT
Join Date: Apr 2007
Location: Did you get that thing I sent you?
Posts: 952
|
5.0L Torque Specs
Belhousing to engine bolts 28-38 ft/lbs Camshaft sprocket bolt 40-45 ft/lbs Camshaft thrust plate to engine block bolts 108-144 in/lbs Crankshaft pulley to vibration damper bolts 35-50 ft/lbs Cylinder head bolts -1979-1992 --Step 1 55-65 ft/lbs --Step 2 65-72 ft/lbs -1993-up --Step 1 25-35 ft/lbs --Step 2 45-55 ft/lbs --Step 3 75-85 ft/lbs Differential shaft lock bolt 15-30 ft/lbs Driveshaft U-joint to pinion flange bolts 70-95 ft/lbs Exhaust manifold bolts 26-32 ft/lbs Flywheel mounting bolts 75-85 ft/lbs Front engine mount nuts 72-98 ft/lbs Intake manifold to head bolts --Step 1 96 in/lbs --Step 2 16ft/lbs --Step 3 23-25 ft/lbs Intake manifold (upper intake to lower) 12-18 ft/lbs Oil filter insert to engine block adapter bolt 20-30 ft/lbs Oil pan mounting bolts -1979 --Step 1 (Large bolts) 11-13 ft/lbs --Step 1 (Short bolts) 7-9 ft/lbs --Step 2 (Large Bolts) 15-17 ft/lbs --Step 2 (Short Bolts) 10-12 ft/lbs -1980 to 1987 9-11 ft/lbs -1988 to 1993 6-9 ft/lbs -1994-up 110-144 in/lbs Oil pickup tube to main bearing cap nut 22-32 ft/lbs Oil pickup tube to oil pump bolts -1979 to 1987 10-15 ft/lbs -1988-up 12-18 ft/lbs Oil pump mounting bolts 22-32 ft/lbs Pinion bearing preload 8-14 in/lbs Pressure plate to flywheel bolts 12-24 ft/lbs Rocker arm fulcrm bolts 18-25 ft/lbs Spark plugs 7-14 ft/lbs Timing chain cover bolts 12-18 ft/lbs Vibration damper to crackshaft bolt 110-130 ft/lbs Wheel lug nuts 85-105 ft/lbs |
|
July 8th, 2008, 11:22 PM
|
#7 |
|
Newbie
1995 mustang gt
Join Date: Jul 2008
Location: houston
Posts: 39
|
thats from allData right?
|
 |
| Thread Tools | |
|
|
Threads Similar to: 5.0 Engine Tech And Specifications
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| TECH! - Help with head swap - Noisy engine... | 96gt226410 | 96-98 | 12 | July 14th, 2008 03:23 PM |
| G-tech? | 06SuperStang | 2005+ | 16 | June 20th, 2008 11:32 PM |
| Mustang Specifications | RC02GT | 99-04 | 12 | February 3rd, 2008 09:05 PM |
| 4.2 Tech, from the 3.8 on! | 04musclestang | V6 Mustangs | 14 | December 22nd, 2006 12:15 AM |
| Engine building tech Q | Zak | 5.0 Mustangs | 1 | August 27th, 2006 05:41 PM |
