sbc in mustang0

baine21225 · January 11th, 2009, 09:45 PM

Originally Posted by Darrell

What does a 1000hp Supra have in common with a 500hp Supra?

12 second timeslips!

oldest joke in the book, i forgot to mention that they are the origin of the term dyno queen

kevnsue · January 12th, 2009, 02:45 PM

I am actually going to do this swap. I have a 406 SBC that came out of my dragster that I am going to put into a 1990 hatch that I bought. The interior in this car is mint!!!! It looks like the day it rolled off the show room floor. The odometer reads 50000 miles and the body is in great condition for a GT that is 19yrs old. Paint is starting to fade in places. I called AJE and they are about 4 weeks out on the k-member and Dyna-Tek was finishing a run on the headers last week. I am so pumped to do this swap I think it is going to be awesome. Good luck with your project.

LXpat93 · January 13th, 2009, 10:05 PM

gotta buddy with an 84 notch with sbc and astro van drive shaft works perfect for auto tranny.
and white thunder chevy motors are way cheaper to build even building an ls motor is cheaper than ford not to bash ford or anything i love my mustang but im just telling the truth.

White Thunder · January 13th, 2009, 10:13 PM

yeah have to buy the ls motor....that makes it cost more

1slo5.0 · January 13th, 2009, 11:32 PM

Cheaper depends on where you get the parts and how much you pay for them. Dollar per horsepower a Chevy is most of the time cheaper to build but by the time you buy all of the swap parts to put it in a Mustang it ends up costing the same or more than building a Ford engine. To each his own though. I have no beef with someone that wants to put a different brand engine in a different brand car. That's what makes this hobby so interesting.....creativity and ingenuity.

86er · January 14th, 2009, 04:55 PM

early 80's malibu long tube headers all but drop in, you have to put a small dent on the floor board on the passenger side, other wise they drop right in. Can pick up a cheap set of flowtechs for 100 bucks brand new

January 13th, 2009, 11:32 PM	#25
1slo5.0 MM Ninjas! 1990 Mustang LX 9.36@143 mph Join Date: Jan 2006 Location: North Fond du Lac, Wisconsin Posts: 11,375 iTrader: 1 reviews	Cheaper depends on where you get the parts and how much you pay for them. Dollar per horsepower a Chevy is most of the time cheaper to build but by the time you buy all of the swap parts to put it in a Mustang it ends up costing the same or more than building a Ford engine. To each his own though. I have no beef with someone that wants to put a different brand engine in a different brand car. That's what makes this hobby so interesting.....creativity and ingenuity. __________________ My daily driver has 16 cylinders and 4400hp @ 1000 rpm.... ***1988 Mustang GT - Stock....almost

January 14th, 2009, 04:55 PM	#26
86er I Post Entirely Way Too Much Join Date: Nov 2006 Location: Memphis, TN Posts: 7,626 iTrader: 0 reviews	early 80's malibu long tube headers all but drop in, you have to put a small dent on the floor board on the passenger side, other wise they drop right in. Can pick up a cheap set of flowtechs for 100 bucks brand new __________________ Just a truck 5.4 3v: 264hp 317ft lbs rock stock The "search" button, its not just for porn piecing together the next project faster than your first sexual experience

Threads Similar to: sbc in mustang0
Thread	Thread Starter	Forum	Replies	Last Post
back at it..408w stang vs 408 SBC Malibu- Cobra vs Z06 and m	mofobucs	Multimedia	6	July 10th, 2007 07:56 AM
Pre-86 and post 86 SBC question	320hpPony?	All Other Vehicles	6	July 1st, 2007 09:03 PM

January 12th, 2009, 02:45 PM	#22
kevnsue Newbie Join Date: May 2007 Posts: 48 iTrader: 0 reviews	I am actually going to do this swap. I have a 406 SBC that came out of my dragster that I am going to put into a 1990 hatch that I bought. The interior in this car is mint!!!! It looks like the day it rolled off the show room floor. The odometer reads 50000 miles and the body is in great condition for a GT that is 19yrs old. Paint is starting to fade in places. I called AJE and they are about 4 weeks out on the k-member and Dyna-Tek was finishing a run on the headers last week. I am so pumped to do this swap I think it is going to be awesome. Good luck with your project.

January 13th, 2009, 10:05 PM	#23
LXpat93 Regular 1993 mustang lx 2.3 havnt ran yet Join Date: Dec 2008 Location: spring hill, fl Posts: 185 iTrader: 0 reviews	gotta buddy with an 84 notch with sbc and astro van drive shaft works perfect for auto tranny. and white thunder chevy motors are way cheaper to build even building an ls motor is cheaper than ford not to bash ford or anything i love my mustang but im just telling the truth.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 06:01 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.