putting my cam in.

		Forums at Modded Mustangs > Mustang Forums > 5.0 Mustangs
putting my cam in.

Discussing putting my cam in. in the 5.0 Mustangs Forum. I had a buddy pull my old cam out for me. I want to put ...

Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free!

LinkBack

Thread Tools

August 19th, 2008, 07:10 PM	#1
flattusmaximus78 MM Fanatic 1993 5.ohhhh 14.47 at 96 mph Join Date: Apr 2006 Location: Gatorland Posts: 3,033	putting my cam in. I had a buddy pull my old cam out for me. I want to put my fcam in. I was told to buy some cam lube so I did. How should I put that on the cam. Just lube it up. Then slide it in? I was told just to put it in and be gentle on the cam bearings. __________________ 302 h/c/i

August 19th, 2008, 07:19 PM

8t6gt

From the land of the wolverines

1986 Mustang GT

Join Date: Apr 2007

Location: Smothering v606er with a plastic walmart bag

Posts: 7,254

Originally Posted by flattusmaximus78

I had a buddy pull out for me. I want to put my fcam in. I was told to buy some cam lube so I did. How should I put that in Just lube it up? Then slide it in? I was told just to put it in and be gentle

I just took out your usless words

__________________

Hurst Crew member #2 of 21
Co Founder of all crews.
Lee B and 8t6 the founders of crews

Proud member of the no southerners aloud SNOWMOBILE CLUB!

August 19th, 2008, 07:26 PM

Haggis13

Enthusiast

1993 Mustang GT

Join Date: Sep 2006

Location: Ottawa, Ontario, Canada

Posts: 508

Originally Posted by flattusmaximus78

I had a buddy pull my old cam out for me. I want to put my fcam in. I was told to buy some cam lube so I did. How should I put that on the cam. Just lube it up. Then slide it in? I was told just to put it in and be gentle on the cam bearings.

It's also easier to get leverage by putting a longer bolt in the front of the cam so you can grab that with your hand when it's almost in.

__________________
Bart
93 Black on Black GT
Kenne Bell S/C

August 19th, 2008, 07:52 PM	#4
flattusmaximus78 MM Fanatic 1993 5.ohhhh 14.47 at 96 mph Join Date: Apr 2006 Location: Gatorland Posts: 3,033	Thansk for that tip man, it was a bitch cause I got your comment to late... but I see why it would work. I just need to find the torque specs for the two little bolts that going behind the timing sprocket. Then the main bolt. __________________ 302 h/c/i

August 19th, 2008, 09:32 PM	#5
93mustank Enthusiast Join Date: Aug 2008 Location: Phoenix,AZ Posts: 510	Just use oil...... __________________ Stock 302,gt40p heads,exploder intake,afm n41 cam Best 1/4..... 11.980 @112.588 mph...1.57 60ft It goes good......

Thread Tools
Show Printable Version Email this Page

Threads Similar to: putting my cam in.
Thread	Thread Starter	Forum	Replies	Last Post
Putting in NAV Help!	Ticket-Me-Yellow	V6 Mustangs	13	December 6th, 2007 05:01 PM
Putting An 03 GT In My 96	JStang14	99-04	15	November 20th, 2007 12:19 AM
Putting In A V8?	jeff	V6 Mustangs	6	October 31st, 2006 01:54 AM
E cam or F cam horsepower and 1/4 mile time questions	GreyGhost	5.0 Mustangs	1	August 21st, 2006 07:25 PM
Putting and 5.0 in my 94 3.8	Easy04_jm	General Tech	2	April 25th, 2006 12:39 AM

All times are GMT -4. The time now is 05:32 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.