Installing U/L Intake...Any trouble

fordrarities · August 20th, 2008, 05:20 PM

Tomorro evening i plan to start to tear down and install a BBK SSI intake... i got it in a trade so no bashing on spending that kind of money on this.

so what i was wondering is... i need to have this done rather quickly, i plan to start thursday and finish up friday. ive already got most of my gaskets and what not, and everything else i just transfer over. anything i should watch out for? i would like for it to go as smoothly as possible. it was previously on a blown fox so i assume that the fuel line issue that is commonly a problem was taken care of.

Any insight is much appreciated!!

fordrarities · August 20th, 2008, 09:24 PM

i think im gonna hide the wires while im at it

93hatch · August 20th, 2008, 09:26 PM

just make sure you have vacum lines going to the right places like fuel pressure regulator, egr, that tree thing, and make sure not to get ur wires put on in the wrong order! and mark where your dizzy was so you put it in right

flyin ryan · August 21st, 2008, 10:18 AM

don't forget to install the egr upside down.. because if you don't then when the upper intake is bolted down you won't be able to plug the egr connector in.

August 20th, 2008, 05:20 PM	#1
fordrarities Regular 1990 GT Join Date: May 2006 Location: NC Posts: 111 iTrader: 0 reviews	Installing U/L Intake...Any trouble Tomorro evening i plan to start to tear down and install a BBK SSI intake... i got it in a trade so no bashing on spending that kind of money on this. so what i was wondering is... i need to have this done rather quickly, i plan to start thursday and finish up friday. ive already got most of my gaskets and what not, and everything else i just transfer over. anything i should watch out for? i would like for it to go as smoothly as possible. it was previously on a blown fox so i assume that the fuel line issue that is commonly a problem was taken care of. Any insight is much appreciated!! __________________ 1990 Mustang GT

August 20th, 2008, 09:24 PM	#2
fordrarities Regular 1990 GT Join Date: May 2006 Location: NC Posts: 111 iTrader: 0 reviews	i think im gonna hide the wires while im at it __________________ 1990 Mustang GT

August 20th, 2008, 09:26 PM	#3
93hatch Banned 1992 Lx 11.39@119.24 Join Date: Jan 2008 Location: Az Posts: 11,644 iTrader: 0 reviews	just make sure you have vacum lines going to the right places like fuel pressure regulator, egr, that tree thing, and make sure not to get ur wires put on in the wrong order! and mark where your dizzy was so you put it in right __________________ [QUOTE=93mustank;2577445]We speed tested my right arm for quickness in shifts... So he could design the cam for proper shift recovery.[/QUOTE]

Threads Similar to: Installing U/L Intake...Any trouble
Thread	Thread Starter	Forum	Replies	Last Post
Trouble Installing Accufab T/B amd plenum.	03_StangGuy	99-04	15	July 7th, 2008 04:17 PM
Intake trouble?	boblongtv	V6 Mustangs	4	April 25th, 2008 12:25 PM
having trouble installing exhaust!!!!!	88stangGT	5.0 Mustangs	9	March 1st, 2008 09:00 PM
Installing Intake	95blackbeauty	94-95	3	December 21st, 2007 05:17 PM
Intake trouble	4.6???	94-95	1	February 8th, 2007 10:59 PM

August 21st, 2008, 10:18 AM	#4
flyin ryan Banned Join Date: Jun 2008 Posts: 3,387 iTrader: 0 reviews	don't forget to install the egr upside down.. because if you don't then when the upper intake is bolted down you won't be able to plug the egr connector in.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 06:30 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.