1995 Mustang GT 5.0

Josh21 · December 12th, 2006, 06:41 PM

I Just Bought a 1995 Ford Mustang GT it has a trick flow Intake and mac cold air with a 5 speed and short throw shifter and flow master cat back exhaust and all has been converted to 70 mm what else can i do that is not wallet kill to upgrade her some more already has 3:73 gears and suspension from eibach im a truck driver and dont have a whole lot of time to do real major tuning but i would like to find some trick flow heads that are atleast around 500 dollars my goal is to get at least 400 rwhp can u help

Josh21 · December 12th, 2006, 06:42 PM

i need 400 rwhp how can i do that without major mods

Tony_90fox · December 12th, 2006, 07:13 PM

heads would do you good, good internals, maybe stroke it out, then nitrous!

Stangzilla · December 12th, 2006, 08:29 PM

Good luck finding Trick flow heads for 500 bucks. if you do let us all know...Seriously though 400 rwhp is gonna cost you a 2 or 3 thousand dollars..at least

Tony_90fox · December 13th, 2006, 08:39 PM

at least!

Stangzilla · December 13th, 2006, 09:39 PM

yeah u r prob right 3 grand minium unless you spray

Tony_90fox · December 13th, 2006, 09:51 PM

i am putting up 6K without a poweradder and still wont be there...close, but not 400 HP...I am getting alot of stuff that doesnt add HP though like tubular K Member and stuff....

In other words, good luck getting 400 HP on a very low budget, and keep us informed on TF heads for $500. i have seen used ones go for more than that!

flattusmaximus78 · December 14th, 2006, 10:16 AM

Thats a damn nice set-up to start with... how much of a deal you get on it?

94cobraclone · December 14th, 2006, 08:55 PM

mine has a supercharger on it and I am probably around 475-490 rwhp dont know for sure though havent gone to a dyno yet.

FaStStAnG5-0 · December 15th, 2006, 08:30 AM

it's going to cost you a bit to get 400hp & be able to handle all of it as well!

Clean90GT · December 15th, 2006, 11:11 AM

Originally Posted by 94cobraclone

mine has a supercharger on it and I am probably around 475-490 rwhp dont know for sure though havent gone to a dyno yet.

You'll be lucky if you make 425HP with your setup unless you have more boost than that powerdyne 6psi setup. My S-trim at 9psi was at about 400 to the wheel with a built AOD setup and a good tune. (No AC either)

95opal · December 15th, 2006, 11:01 PM

Originally Posted by Clean90GT

Originally Posted by 94cobraclone

mine has a supercharger on it and I am probably around 475-490 rwhp dont know for sure though havent gone to a dyno yet.

You'll be lucky if you make 425HP with your setup unless you have more boost than that powerdyne 6psi setup. My S-trim at 9psi was at about 400 to the wheel with a built AOD setup and a good tune. (No AC either)

My thoughts exactly.

Stangzilla · December 16th, 2006, 12:37 AM

+3 if he is lucky. On a Mustang dyno be lucky if he breaks 400RWHP..

94cobraclone · December 16th, 2006, 12:53 AM

mine is not a 6psi charger dude. I am pulling 10 lbs of boost on mine.
gt40 heads, edlebrock upper and lower, steeda cam, upper and lower forged. It will be way over 400rwhp. It is running low 7's in the 1/8 mile. t5 world class trans. 3.73 posi rear.

94cobraclone · December 16th, 2006, 12:54 AM

it is the 9psi powerdyne with an 11psi pulley on it.

Stangzilla · December 16th, 2006, 12:59 AM

Low 7's in the 1/8 mile you mean. Thats a mid_low 11 sec car.. not bad but not fast enough...!!!!

Stangzilla · December 16th, 2006, 01:00 AM

Powerdyne sucks anyway!!

94cobraclone · December 16th, 2006, 09:42 AM

Originally Posted by Stangzilla

Low 7's in the 1/8 mile you mean. Thats a mid_low 11 sec car.. not bad but not fast enough...!!!!

i said 1/8 mile.. Also I am not dising any of your guys cars.. so stop dissing mine.

91GRNGT · December 16th, 2006, 10:16 AM

cobra clone, don't' get so upset man, they are just jealous that they don't have a kick ass HP car like that... HEHEHE

95opal · December 16th, 2006, 10:27 AM

No body is dissing your ride, I actually think its quite sweet. Your hp expextations are just quite out of the ballpark for that particular set up thats all.

December 12th, 2006, 06:41 PM	#1
Josh21 Newbie Join Date: Dec 2006 Posts: 2 iTrader: 0 reviews	1995 Mustang GT 5.0 I Just Bought a 1995 Ford Mustang GT it has a trick flow Intake and mac cold air with a 5 speed and short throw shifter and flow master cat back exhaust and all has been converted to 70 mm what else can i do that is not wallet kill to upgrade her some more already has 3:73 gears and suspension from eibach im a truck driver and dont have a whole lot of time to do real major tuning but i would like to find some trick flow heads that are atleast around 500 dollars my goal is to get at least 400 rwhp can u help

December 12th, 2006, 07:13 PM	#3
Tony_90fox Banned Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,831 iTrader: 0 reviews	heads would do you good, good internals, maybe stroke it out, then nitrous! __________________ [SIGPIC][/SIGPIC] [B][U]MM Sapper Squad[/U][/B] [QUOTE=Regency 2007;1676187]MSO's stupidity has never stopped amazing me since the day he joined this forum.[/QUOTE]

December 12th, 2006, 08:29 PM	#4
Stangzilla MM Fanatic Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 3,298 iTrader: 0 reviews	Good luck finding Trick flow heads for 500 bucks. if you do let us all know...Seriously though 400 rwhp is gonna cost you a 2 or 3 thousand dollars..at least __________________ Rotating The Earth 1320 Feet At A Time!! Today, I found out that when I masturbate at night while watching internet porn I cast a huge shadow on the curtain and the entire street is able to see it.

December 13th, 2006, 08:39 PM	#5
Tony_90fox Banned Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,831 iTrader: 0 reviews	at least! __________________ [SIGPIC][/SIGPIC] [B][U]MM Sapper Squad[/U][/B] [QUOTE=Regency 2007;1676187]MSO's stupidity has never stopped amazing me since the day he joined this forum.[/QUOTE]

December 13th, 2006, 09:39 PM	#6
Stangzilla MM Fanatic Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 3,298 iTrader: 0 reviews	yeah u r prob right 3 grand minium unless you spray __________________ Rotating The Earth 1320 Feet At A Time!! Today, I found out that when I masturbate at night while watching internet porn I cast a huge shadow on the curtain and the entire street is able to see it.

December 12th, 2006, 06:42 PM	#2
Josh21 Newbie Join Date: Dec 2006 Posts: 2 iTrader: 0 reviews	i need 400 rwhp how can i do that without major mods

December 13th, 2006, 09:51 PM	#7
Tony_90fox Banned Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,831 iTrader: 0 reviews	i am putting up 6K without a poweradder and still wont be there...close, but not 400 HP...I am getting alot of stuff that doesnt add HP though like tubular K Member and stuff.... In other words, good luck getting 400 HP on a very low budget, and keep us informed on TF heads for $500. i have seen used ones go for more than that! __________________ [SIGPIC][/SIGPIC] [B][U]MM Sapper Squad[/U][/B] [QUOTE=Regency 2007;1676187]MSO's stupidity has never stopped amazing me since the day he joined this forum.[/QUOTE]

December 14th, 2006, 10:16 AM	#8
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,077 iTrader: 3 reviews	Thats a damn nice set-up to start with... how much of a deal you get on it? __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

December 14th, 2006, 08:55 PM	#9
94cobraclone Regular Join Date: Nov 2006 Location: columbus, ga Posts: 142 iTrader: 0 reviews	mine has a supercharger on it and I am probably around 475-490 rwhp dont know for sure though havent gone to a dyno yet. __________________ Powerdyne supercharger Ebrock perf upper/lower intake Steeda 18 cam GT-40 heads MSD Ignition All forged bottom end BBK headers 3:73 rear end T-5 Manual Trans

December 15th, 2006, 08:30 AM	#10
FaStStAnG5-0 Hardcore Enthusiast Join Date: Jul 2006 Location: Mooresville, NC Posts: 1,222 iTrader: 0 reviews	it's going to cost you a bit to get 400hp & be able to handle all of it as well! __________________ http://www.cardomain.com/ride/2461223 1994 GT: MSD 6AL, BBK O/R H-Pipe, Dynomax Race Bullet mufflers, 3:73 rear, Hurst Short Shifter, MAC cold air intake & much more coming soon!

December 16th, 2006, 12:37 AM	#13
Stangzilla MM Fanatic Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 3,298 iTrader: 0 reviews	+3 if he is lucky. On a Mustang dyno be lucky if he breaks 400RWHP.. __________________ Rotating The Earth 1320 Feet At A Time!! Today, I found out that when I masturbate at night while watching internet porn I cast a huge shadow on the curtain and the entire street is able to see it.

December 16th, 2006, 12:53 AM	#14
94cobraclone Regular Join Date: Nov 2006 Location: columbus, ga Posts: 142 iTrader: 0 reviews	mine is not a 6psi charger dude. I am pulling 10 lbs of boost on mine. gt40 heads, edlebrock upper and lower, steeda cam, upper and lower forged. It will be way over 400rwhp. It is running low 7's in the 1/8 mile. t5 world class trans. 3.73 posi rear. __________________ Powerdyne supercharger Ebrock perf upper/lower intake Steeda 18 cam GT-40 heads MSD Ignition All forged bottom end BBK headers 3:73 rear end T-5 Manual Trans

December 16th, 2006, 12:54 AM	#15
94cobraclone Regular Join Date: Nov 2006 Location: columbus, ga Posts: 142 iTrader: 0 reviews	it is the 9psi powerdyne with an 11psi pulley on it. __________________ Powerdyne supercharger Ebrock perf upper/lower intake Steeda 18 cam GT-40 heads MSD Ignition All forged bottom end BBK headers 3:73 rear end T-5 Manual Trans

December 16th, 2006, 12:59 AM	#16
Stangzilla MM Fanatic Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 3,298 iTrader: 0 reviews	Low 7's in the 1/8 mile you mean. Thats a mid_low 11 sec car.. not bad but not fast enough...!!!! __________________ Rotating The Earth 1320 Feet At A Time!! Today, I found out that when I masturbate at night while watching internet porn I cast a huge shadow on the curtain and the entire street is able to see it.

December 16th, 2006, 01:00 AM	#17
Stangzilla MM Fanatic Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 3,298 iTrader: 0 reviews	Powerdyne sucks anyway!! __________________ Rotating The Earth 1320 Feet At A Time!! Today, I found out that when I masturbate at night while watching internet porn I cast a huge shadow on the curtain and the entire street is able to see it.

December 16th, 2006, 10:16 AM	#19
91GRNGT Regular Join Date: Oct 2006 Location: Cohutta,ga Posts: 117 iTrader: 0 reviews	cobra clone, don't' get so upset man, they are just jealous that they don't have a kick ass HP car like that... HEHEHE __________________ 1991 Mustang GT 306, with KB .30 over pistons, steeda #18 cam! 05 Dodge Neon "Daily driver" Does dodge and ford match???

December 16th, 2006, 10:27 AM	#20
95opal Hardcore Enthusiast 95 opalfrost gt Join Date: Nov 2006 Location: Connecticut Posts: 1,470 iTrader: 0 reviews	No body is dissing your ride, I actually think its quite sweet. Your hp expextations are just quite out of the ballpark for that particular set up thats all. __________________ 5.0 magazines 94-04 performance mustangs feature car! Fall 2010

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: 1995 Mustang GT 5.0
Thread	Thread Starter	Forum	Replies	Last Post
New 1995 Mustang GT	dothedew1654	5.0 Mustangs	3	October 21st, 2007 08:29 PM
1995 Mustang GT Makeover	Ced	5.0 Mustangs	5	April 21st, 2007 04:46 PM
hey new guy 1995 v6 mustang help	mustangklint95	New Members Introductions	3	December 13th, 2006 01:46 AM
3.8 to 4.6 in 1995 Mustang	fourweelin	5.0 Mustangs	2	December 10th, 2006 02:56 PM

All times are GMT -4. The time now is 07:05 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.