? (Chip for 95 GT)

new 5.0 · December 15th, 2006, 12:26 PM

what is a good chip to add to my 95 gt at a fair price but good.

95opal · December 15th, 2006, 09:58 PM

What mods do you have ? The only chip worth putting in is a custom burnt chip specifically for your combo OTS chips are

. Get to a dyno and have them burn ya a chip if you think you need one.

new 5.0 · December 15th, 2006, 10:44 PM

MY CAR STOCK BUT I'M GOING TO INSTALL A FLOWMASTER 40SERIES DELTA FORCE EXHAUST. ALONG WITH SOME HEADERS

TENGRAM · December 15th, 2006, 11:00 PM

Originally Posted by new 5.0

MY CAR STOCK BUT I'M GOING TO INSTALL A FLOWMASTER 40SERIES DELTA FORCE EXHAUST. ALONG WITH SOME HEADERS

IMO, unnecessary at this point to get a chip burnt for it. sure a tuner or a custom burnt chip might add a hp or 2 but not worth the $$$ until you get more mods. off the shelf chips are worthless...you can bump the timing up yourself

new 5.0 · December 16th, 2006, 12:12 PM

HOW CAN I ADJUST THE TIMING?

Tony_90fox · December 16th, 2006, 08:40 PM

get a timing light, put a mark on the number you want it set at, plug the light into the number one spark plug, take out the spout connector, loosen the disrtibutor, start the car. turn the distributor until the mark is on the pointer. tightent the distributor. turn off the car, then start it again and then see if your mark changed....easier to do with two people, but the is the gist how to do it!

Justincredible · December 16th, 2006, 09:39 PM

Originally Posted by TENGRAM

Originally Posted by new 5.0

MY CAR STOCK BUT I'M GOING TO INSTALL A FLOWMASTER 40SERIES DELTA FORCE EXHAUST. ALONG WITH SOME HEADERS

IMO, unnecessary at this point to get a chip burnt for it. sure a tuner or a custom burnt chip might add a hp or 2 but not worth the $$$ until you get more mods. off the shelf chips are worthless...you can bump the timing up yourself

+1

new 5.0 · December 16th, 2006, 09:52 PM

sound like a mission.i dont even know were to get one of those lights or how much it cost.

92_fox · December 16th, 2006, 09:59 PM

Originally Posted by new 5.0

sound like a mission.i dont even know were to get one of those lights or how much it cost.

your local pepboys autozone walmart anything like that its not that hard to do im 17 and have done it a couple to many times on my car changing distributors and just messing with the timing

Justincredible · December 16th, 2006, 10:00 PM

Originally Posted by new 5.0

sound like a mission.i dont even know were to get one of those lights or how much it cost.

Any parts store. ~$40 will get you what you need.

92_fox · December 16th, 2006, 10:05 PM

don't forget you'll need the distributor wrench or a socket with a swivel of the same size to loosen the dizzy

Tony_90fox · December 16th, 2006, 10:29 PM

yeah i probably left out a few steps. Just laying down the basics...you can probably find a write up about it on google.

December 15th, 2006, 12:26 PM	#1
new 5.0 Regular Join Date: Nov 2006 Location: miami Posts: 181	? (Chip for 95 GT) what is a good chip to add to my 95 gt at a fair price but good.

December 15th, 2006, 09:58 PM	#2
95opal Enthusiast 95 opalfrost gt Join Date: Nov 2006 Location: Connecticut Posts: 988	What mods do you have ? The only chip worth putting in is a custom burnt chip specifically for your combo OTS chips are . Get to a dyno and have them burn ya a chip if you think you need one. __________________

December 15th, 2006, 10:44 PM	#3
new 5.0 Regular Join Date: Nov 2006 Location: miami Posts: 181	STOCK MY CAR STOCK BUT I'M GOING TO INSTALL A FLOWMASTER 40SERIES DELTA FORCE EXHAUST. ALONG WITH SOME HEADERS

December 16th, 2006, 12:12 PM	#5
new 5.0 Regular Join Date: Nov 2006 Location: miami Posts: 181	BUMP UP TIMMING HOW CAN I ADJUST THE TIMING?

December 16th, 2006, 08:40 PM	#6
Tony_90fox MM Fanatic Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,590	get a timing light, put a mark on the number you want it set at, plug the light into the number one spark plug, take out the spout connector, loosen the disrtibutor, start the car. turn the distributor until the mark is on the pointer. tightent the distributor. turn off the car, then start it again and then see if your mark changed....easier to do with two people, but the is the gist how to do it! __________________ 393 dropping in a foxbody near you, very very soon Military Crew E-3 Combat Engineer

? (Chip for 95 GT)

? (Chip for 95 GT)

STOCK

Re: STOCK

BUMP UP TIMMING

Re: STOCK

????????

Re: ????????

Re: ????????

December 16th, 2006, 09:52 PM	#8
new 5.0 Regular Join Date: Nov 2006 Location: miami Posts: 181	???????? sound like a mission.i dont even know were to get one of those lights or how much it cost.

December 16th, 2006, 10:05 PM	#11
92_fox Newbie Join Date: Oct 2006 Posts: 40	don't forget you'll need the distributor wrench or a socket with a swivel of the same size to loosen the dizzy __________________ 92lx, bbk hpipe, flowmaster cat back, underdrive pulleys, bbk cai, msd pro billit dizzy and more to defff come http://i57.photobucket.com/albums/g2...9341copy-1.jpg

December 16th, 2006, 10:29 PM	#12
Tony_90fox MM Fanatic Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,590	yeah i probably left out a few steps. Just laying down the basics...you can probably find a write up about it on google. __________________ 393 dropping in a foxbody near you, very very soon Military Crew E-3 Combat Engineer

Threads Similar to: ? (Chip for 95 GT)
Thread	Thread Starter	Forum	Replies	Last Post
Which chip should I get?	Rutcutter	5.0 Mustangs	10	June 19th, 2007 07:36 PM
SCT chip????	95blackbeauty	94-95	1	March 15th, 2007 10:47 PM
chip maybe>?	speed4goal	5.0 Mustangs	17	January 27th, 2007 04:49 PM
HP Chip	mustang1072	V6 Mustangs	14	January 24th, 2007 12:45 PM
Chip	Mkenne4@tampabay.rr.com	V6 Mustangs	4	December 13th, 2006 09:05 PM

All times are GMT -4. The time now is 07:56 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.