New Pic

Nice 5.0 · November 10th, 2008, 01:13 AM

Cleaned up the ride this weekend and put on the new wheels. I have a set of slicks on the back hope to drop the times a few tenths at the track. Never could get the car to hook at the track with the Nitto drag radials. I don't think that will be a probably anymore. I can't even spin the slicks on the street.

The Novice · November 10th, 2008, 01:16 AM

Looks nice, whats done to it?

Got a track time?

Looks nice those, looks clean. Thumbs up!

00SoSlow · November 10th, 2008, 02:15 AM

I like it a lot! any times?

Nice 5.0 · November 10th, 2008, 03:56 PM

Thanks guys. It has a stock bottom end windsor Jr. heads, e-303 cam, edelbrock performer intake, 70mm TB, 373 gears, Five speed, Long tubes, and Flowmasters. I haven't ran the car in a while. Quickest I've been on motor is 12.9 1/4 and 8.2 in the 1/8. I sprayed it with a 125 shot a few times and managed a 12.2 1/4. I never been able to leave with any kind of rpm i could never get traction with my old tires. Car begins to pull at about 2500 rpm. I'm hoping for a 12.5 on motor and mid 11's with the nitrous. I'm not going to launch too crazy i'm still running stock tranny. I have a set of 31 spline axles waiting to go in and i'm going to put in 4.10's while i'm in there. Clutch is new so the weak link will be the tranny now.

-Joeyy- · November 10th, 2008, 04:19 PM

yeah go auto manual valve body c4

sexy ass car too looks amazing

** orgasm **

flattusmaximus78 · November 11th, 2008, 09:30 AM

Nice top end kit... ecams on the downside but it gets the job done. If you don't go mid 12s I'm sure you will with the new gear. Car looks good.

grnstang · November 11th, 2008, 10:00 AM

do you have any suspension mods? i'd look into getting 31 spline axels and rear control arms, subframes, etc

grnstang · November 11th, 2008, 10:00 AM

nice car by the way, and those are some impressive times...what were your 60's with the nittos?

Nice 5.0 · November 14th, 2008, 01:50 AM

Originally Posted by flattusmaximus78

Nice top end kit... ecams on the downside but it gets the job done. If you don't go mid 12s I'm sure you will with the new gear. Car looks good.

Thanks.

Originally Posted by grnstang

do you have any suspension mods? i'd look into getting 31 spline axels and rear control arms, subframes, etc

I have upper and lower control arms, bbk lowering springs, front sway bar removed, and subframe connectors. I have a set of 31 spline axles with c-clip eliminators and a rebuilt diff waiting to go in.

Originally Posted by grnstang

nice car by the way, and those are some impressive times...what were your 60's with the nittos?

1.8 sixty foot. Launching at idle. That happened one outing to the track. The rest of the time i would get 2.0 spinning.

tayboo24 · November 14th, 2008, 02:32 AM

thats a mean stance man.

rasalibre · November 14th, 2008, 04:03 AM

Nice notch man, im trying to build one myself, yours is sharp!

rasalibre · November 14th, 2008, 04:06 AM

me likey!

sixxxshoooter · November 14th, 2008, 08:46 AM

Sexy as hell....

rwboring · November 14th, 2008, 09:03 AM

12's on a stock bottom end 5.0... thats sweet... esp with no slicks...

JTS · November 14th, 2008, 11:10 AM

Amazing!

Hunt_chevs · November 14th, 2008, 01:39 PM

nice lookin focks

Nice 5.0 · November 15th, 2008, 12:16 AM

Thanks for the compliments. It has bbk springs. 1.5 in the front 3/4 drop in the rear. I like how it sits also. The pics are deceptive. The car really needs paint plus I want a cowl hood. I want to paint it myself. I've never painted before but I read a little of articles. Hopefully in a few years. Money is tight!

November 10th, 2008, 01:13 AM	#1
Nice 5.0 Regular 1993 12.9 @ 105 Join Date: Jan 2007 Location: Raleigh NC Posts: 299 iTrader: 0 reviews	New Pic Cleaned up the ride this weekend and put on the new wheels. I have a set of slicks on the back hope to drop the times a few tenths at the track. Never could get the car to hook at the track with the Nitto drag radials. I don't think that will be a probably anymore. I can't even spin the slicks on the street. Last edited by Nice 5.0; April 20th, 2009 at 05:29 PM.

November 10th, 2008, 02:15 AM	#3
00SoSlow Hardcore Enthusiast Join Date: Feb 2006 Location: Pewaukee, Wisconsin Posts: 1,340 iTrader: 0 reviews	I like it a lot! any times? __________________ 2000 V6 Performance Red @ Cardomain Was fun but a waste... 1987 LX Hatch \| Soon to be a 600hp monster

November 11th, 2008, 09:30 AM	#6
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,122 iTrader: 3 reviews	Nice top end kit... ecams on the downside but it gets the job done. If you don't go mid 12s I'm sure you will with the new gear. Car looks good. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

November 11th, 2008, 10:00 AM	#7
grnstang Hardcore Enthusiast 91 LX 13.7@101 Join Date: Oct 2008 Location: Norwalk OH Posts: 1,426 iTrader: 1 reviews	do you have any suspension mods? i'd look into getting 31 spline axels and rear control arms, subframes, etc __________________

November 11th, 2008, 10:00 AM	#8
grnstang Hardcore Enthusiast 91 LX 13.7@101 Join Date: Oct 2008 Location: Norwalk OH Posts: 1,426 iTrader: 1 reviews	nice car by the way, and those are some impressive times...what were your 60's with the nittos? __________________

November 10th, 2008, 01:16 AM	#2
The Novice Hardcore Enthusiast 87 Mustang GT T-top Join Date: Jul 2007 Location: Grand Rapids, MI Posts: 1,149 iTrader: 0 reviews	Looks nice, whats done to it? Got a track time? Looks nice those, looks clean. Thumbs up!

November 10th, 2008, 03:56 PM	#4
Nice 5.0 Regular 1993 12.9 @ 105 Join Date: Jan 2007 Location: Raleigh NC Posts: 299 iTrader: 0 reviews	Thanks guys. It has a stock bottom end windsor Jr. heads, e-303 cam, edelbrock performer intake, 70mm TB, 373 gears, Five speed, Long tubes, and Flowmasters. I haven't ran the car in a while. Quickest I've been on motor is 12.9 1/4 and 8.2 in the 1/8. I sprayed it with a 125 shot a few times and managed a 12.2 1/4. I never been able to leave with any kind of rpm i could never get traction with my old tires. Car begins to pull at about 2500 rpm. I'm hoping for a 12.5 on motor and mid 11's with the nitrous. I'm not going to launch too crazy i'm still running stock tranny. I have a set of 31 spline axles waiting to go in and i'm going to put in 4.10's while i'm in there. Clutch is new so the weak link will be the tranny now.

November 10th, 2008, 04:19 PM	#5
-Joeyy- Banned 1989 Join Date: Sep 2008 Location: Mastic Beach Posts: 392 iTrader: 0 reviews	yeah go auto manual valve body c4 sexy ass car too looks amazing orgasm

November 14th, 2008, 02:32 AM	#10
tayboo24 Enthusiast 91 Talon TSi dunno? Join Date: May 2007 Location: Edmonton, AB Posts: 593 iTrader: 0 reviews	thats a mean stance man. __________________ This sig brought to you by 6er_w/a_Vengance MM 4-Banger Club: ... i just clean the bathrooms

November 14th, 2008, 04:03 AM	#11
rasalibre Regular 1988 Mustang LX Coupe N/A Join Date: Nov 2008 Location: Salem, Oregon Posts: 216 iTrader: 0 reviews	Nice notch man, im trying to build one myself, yours is sharp! __________________ -Joe Alvarez

November 14th, 2008, 04:06 AM	#12
rasalibre Regular 1988 Mustang LX Coupe N/A Join Date: Nov 2008 Location: Salem, Oregon Posts: 216 iTrader: 0 reviews	nice notch me likey! __________________ -Joe Alvarez

November 14th, 2008, 08:46 AM	#13
sixxxshoooter Regular 1989 Mustang Gt 5.0 n/a Join Date: Nov 2007 Location: Greensboro Posts: 322 iTrader: 0 reviews	Sexy as hell.... __________________ 302, Cobra upper and Lower Intake,UDP's,BBK Shorties with Flow Dumps, SMog Delete,CAI, 70mm TB, K&N Filter, Timing 14 degrees, Lowered 1.5, 3.73's, Nitto Dr's. "Its not that there is ever too much Horsepower, but not enough traction."

November 14th, 2008, 09:03 AM	#14
rwboring Banned 2008 GCSRT8, 1965 Coupe; Join Date: Sep 2008 Posts: 318 iTrader: 0 reviews	12's on a stock bottom end 5.0... thats sweet... esp with no slicks...

November 14th, 2008, 01:39 PM	#16
Hunt_chevs Hardcore Enthusiast 2002 Gt Not Slow Join Date: Aug 2007 Location: SJ-CA, 50-ft elev. Posts: 1,649 iTrader: 1 reviews	nice lookin focks __________________ 2k2 Gt Eibach pro kit, bbk cold air, exhaust, 4.10s, 6k hid's

November 15th, 2008, 12:16 AM	#17
Nice 5.0 Regular 1993 12.9 @ 105 Join Date: Jan 2007 Location: Raleigh NC Posts: 299 iTrader: 0 reviews	Thanks for the compliments. It has bbk springs. 1.5 in the front 3/4 drop in the rear. I like how it sits also. The pics are deceptive. The car really needs paint plus I want a cowl hood. I want to paint it myself. I've never painted before but I read a little of articles. Hopefully in a few years. Money is tight!

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: New Pic
Thread	Thread Starter	Forum	Replies	Last Post
Pic of my a**	Drick	The Clubhouse	26	May 1st, 2008 01:17 AM
Pic Of My 92 GT	va cobra	Pictures	30	November 18th, 2007 04:50 PM
just a pic....	tommyboy	2005 - 2010	7	August 9th, 2007 05:49 AM
Pic	shadow98gt	The Clubhouse	3	June 4th, 2007 10:33 PM
pic	kreil45	New Members Introductions	3	May 25th, 2007 06:28 PM

All times are GMT -4. The time now is 05:26 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.

New Pic

New Pic

nice notch