RH Roof Rail Molding

Red95_5Oh · November 2nd, 2011, 04:54 PM

Hello,

I was involved in a hit and run two weeks (I was the hit-e not the run-e) and I have to pay for all the repairs. Question is, where can I get a roof rail molding? Latemodelresto does not have the 94-98 rails. The 99-04 look the same but will they fit? I am going to check le junk yards and prob get one from there but I will need all the other parts that go along with it.

steveofire · November 2nd, 2011, 05:18 PM

Mustangs Unlimited - The Premier Source for Mustang, Shelby and Cougar Parts and Accessories

Red95_5Oh · November 2nd, 2011, 05:23 PM

Thank you. Jesus H Christ 164?!?! I think my heart stopped brb.

steveofire · November 2nd, 2011, 05:25 PM

lmao I have jumper cables standing by just give the word lol I would just either browse craigs list and look for someone parting out a stang or go to a junk yard and find one for a hella lot cheaper

steveofire · November 2nd, 2011, 05:27 PM

or here ya go 94 mustang roof rail | eBay

steveofire · November 2nd, 2011, 06:17 PM

here is a couple pics of my new parts to go carb.

One wire gm dist for the 351 so no more ecu taking control of timing and I will be using this in a blow thru setup and a single plane intake polished with a cross over tube in the back water jackets

Bubba95SN · November 4th, 2011, 08:50 PM

The R&R on molding is a bit different. Did my right side last year. Read before starting.

Red95_5Oh · November 5th, 2011, 12:12 AM

And actually... its the LH driver side... They used to have them on late model resto... but now that I f'n need it its gone! WTF!

I will prob be going to a junk yard to pull the part as dude is going to start spraying soon... don't want to just say f it and get it later cause the car will look f'n ugly with out... But 160... nah bro id just take the other one off and roll around custom style son!

November 2nd, 2011, 04:54 PM	#1
Red95_5Oh Regular 1995 GT 4Ever Join Date: Apr 2010 Location: C Town Posts: 170 iTrader: 0 reviews	RH Roof Rail Molding Hello, I was involved in a hit and run two weeks (I was the hit-e not the run-e) and I have to pay for all the repairs. Question is, where can I get a roof rail molding? Latemodelresto does not have the 94-98 rails. The 99-04 look the same but will they fit? I am going to check le junk yards and prob get one from there but I will need all the other parts that go along with it.

November 2nd, 2011, 05:18 PM	#2
steveofire Regular 1994 Mustang Cobra Join Date: Mar 2011 Location: Minnesota Posts: 185 iTrader: 0 reviews	Mustangs Unlimited - The Premier Source for Mustang, Shelby and Cougar Parts and Accessories __________________ 94 Cobra 351w .040 over DSS Forged Pistons Scat Rods TFTW Heads 2.205 Intake 1.62 Exhaust Trick Flow R Intake 750Cc RC Injectors Aeromotive A1000 pump and Reg Boost Brothers Turbo Kit

November 2nd, 2011, 05:25 PM	#4
steveofire Regular 1994 Mustang Cobra Join Date: Mar 2011 Location: Minnesota Posts: 185 iTrader: 0 reviews	lmao I have jumper cables standing by just give the word lol I would just either browse craigs list and look for someone parting out a stang or go to a junk yard and find one for a hella lot cheaper __________________ 94 Cobra 351w .040 over DSS Forged Pistons Scat Rods TFTW Heads 2.205 Intake 1.62 Exhaust Trick Flow R Intake 750Cc RC Injectors Aeromotive A1000 pump and Reg Boost Brothers Turbo Kit

November 2nd, 2011, 05:27 PM	#5
steveofire Regular 1994 Mustang Cobra Join Date: Mar 2011 Location: Minnesota Posts: 185 iTrader: 0 reviews	or here ya go 94 mustang roof rail \| eBay __________________ 94 Cobra 351w .040 over DSS Forged Pistons Scat Rods TFTW Heads 2.205 Intake 1.62 Exhaust Trick Flow R Intake 750Cc RC Injectors Aeromotive A1000 pump and Reg Boost Brothers Turbo Kit

November 2nd, 2011, 06:17 PM	#6
steveofire Regular 1994 Mustang Cobra Join Date: Mar 2011 Location: Minnesota Posts: 185 iTrader: 0 reviews	here is a couple pics of my new parts to go carb. One wire gm dist for the 351 so no more ecu taking control of timing and I will be using this in a blow thru setup and a single plane intake polished with a cross over tube in the back water jackets __________________ 94 Cobra 351w .040 over DSS Forged Pistons Scat Rods TFTW Heads 2.205 Intake 1.62 Exhaust Trick Flow R Intake 750Cc RC Injectors Aeromotive A1000 pump and Reg Boost Brothers Turbo Kit

November 2nd, 2011, 05:23 PM	#3
Red95_5Oh Regular 1995 GT 4Ever Join Date: Apr 2010 Location: C Town Posts: 170 iTrader: 0 reviews	Thank you. Jesus H Christ 164?!?! I think my heart stopped brb.

November 4th, 2011, 08:50 PM	#7
Bubba95SN Regular 1995 Mustang GT Join Date: Feb 2011 Location: Jacksonville NC Posts: 211 iTrader: 0 reviews	The R&R on molding is a bit different. Did my right side last year. Read before starting.

November 5th, 2011, 12:12 AM	#8
Red95_5Oh Regular 1995 GT 4Ever Join Date: Apr 2010 Location: C Town Posts: 170 iTrader: 0 reviews	And actually... its the LH driver side... They used to have them on late model resto... but now that I f'n need it its gone! WTF! I will prob be going to a junk yard to pull the part as dude is going to start spraying soon... don't want to just say f it and get it later cause the car will look f'n ugly with out... But 160... nah bro id just take the other one off and roll around custom style son!

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: RH Roof Rail Molding
Thread	Thread Starter	Forum	Replies	Last Post
Molding on Roof by T-Tops	fordmstng66	5.0 Mustangs	1	August 23rd, 2011 09:14 PM
Door Molding	Stevo077	5.0 Mustangs	1	August 18th, 2011 11:18 PM
rail roof molding	00redgt	99-04	1	March 27th, 2009 05:43 PM
rail roof seal	00redgt	99-04	6	November 25th, 2008 12:52 PM
Molding Options	Speedstang302	5.0 Mustangs	10	January 7th, 2008 09:58 AM

All times are GMT -4. The time now is 07:43 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.