1/4 mile.

95blackbeauty · February 16th, 2008, 06:14 PM

What are yalls E.T.'s with full bolt ons? im just tryin to figure out where ill be runnin. I havent had time to get to a track yet. Just curious...i knw it also depends on the driver mod.

342pony · February 17th, 2008, 01:25 AM

I had a 90 lx with a 342 in it. It had all the bolt ons you could put on the motor. I had the stock suspention on the car also. I went a best of 12.20 @111 with a 60ft time of 1.75. If I had some decent suspention on the car it would have gone 11.90`s. That was on a track that was at 2800 ft. above sea level.

Bullitt95 · February 17th, 2008, 03:10 PM

With full external bolt-ons plus home ported factory heads/intake, I did the 1/4 mile in 14.37 @ 100.3 before the 1.7 roller rocker install. The 60' was a sh!##y 2.49.

Justincredible · February 17th, 2008, 05:04 PM

12.98 with a TFS top end kit and all the other normal bolt on's.

kpoirot · February 18th, 2008, 03:08 PM

14.66 @ 95 with the mods i have listed, i'm putting a CAI, headers, better tires, and 75mm throttle body on this spring, i'll let you know what i run then.

February 16th, 2008, 06:14 PM	#1
95blackbeauty Enthusiast 95 5.0 too slow Join Date: Mar 2007 Location: Athens, TX Posts: 862	1/4 mile. What are yalls E.T.'s with full bolt ons? im just tryin to figure out where ill be runnin. I havent had time to get to a track yet. Just curious...i knw it also depends on the driver mod. __________________ 95 gt H.O. Udp's, Pypes O/r X, flowmaster 40's,CAI, 3.73 gears, C&L 76mm MAF,GT40p's, Shorties, 1.6 rr's,Gt40 manifold, short throw, Back Seat Delete

February 17th, 2008, 01:25 AM	#2
342pony Newbie Looking right now Join Date: Jan 2008 Location: California Posts: 43	I had a 90 lx with a 342 in it. It had all the bolt ons you could put on the motor. I had the stock suspention on the car also. I went a best of 12.20 @111 with a 60ft time of 1.75. If I had some decent suspention on the car it would have gone 11.90`s. That was on a track that was at 2800 ft. above sea level. __________________

February 17th, 2008, 03:10 PM	#3
Bullitt95 Regular 1995 Mustang GT auto 13.87@101.3 Join Date: Apr 2007 Location: Al Ain, UAE Posts: 407	With full external bolt-ons plus home ported factory heads/intake, I did the 1/4 mile in 14.37 @ 100.3 before the 1.7 roller rocker install. The 60' was a sh!##y 2.49. __________________ Mod List

February 17th, 2008, 05:04 PM	#4
Justincredible Regular Join Date: Sep 2006 Location: Ky Posts: 482	12.98 with a TFS top end kit and all the other normal bolt on's. __________________ BIVENS RACE CARS

February 18th, 2008, 03:08 PM	#5
kpoirot Regular 1995 GT 5.0 14.66 Join Date: Dec 2007 Location: Adams, MA Posts: 73	14.66 @ 95 with the mods i have listed, i'm putting a CAI, headers, better tires, and 75mm throttle body on this spring, i'll let you know what i run then. __________________ Mods:Underdrive Pulleys, Ram Air w/ K&N Filter, Rebuilt T-5, 3.73s, High Flow H-Pipe, Energy Suspension Poly Motor and Tranny Mounts. Soon: Un= headers, Centerforce Clutch, Steeda Tri-Ax Fidanza Alumnum FW, BBK 75mm TB, EGR Elim.

Threads Similar to: 1/4 mile.
Thread	Thread Starter	Forum	Replies	Last Post
1/4 Mile and 0-60	tlr96	The Clubhouse	10	November 13th, 2007 10:50 PM
1/4 mile	94gtred	94-95	4	May 15th, 2007 04:02 PM
07 1/4 mile	FastBack71	Modular Mustangs	11	February 7th, 2007 04:43 PM
1/4 mile	FastBack71	5.0 Mustangs	27	January 19th, 2007 12:14 AM
est 1/4 mile	jred	96-98	7	January 14th, 2007 10:52 AM

All times are GMT -4. The time now is 03:03 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.