Flat Lifter

Euroeater95 · October 10th, 2006, 11:38 AM

Whats up guys, I have a 347 Stroker in my 1995 GT Convertible and I had on of my hydraulic lifters go flat and I was wondering if it will pump up all on its own or if I need to replace it?

5-0stank · October 10th, 2006, 10:01 PM

i would just replace them, are they new??? you can get a set for like 65 bucks

Euroeater95 · October 11th, 2006, 04:47 PM

To awnser your question, they are new and I think that they will be more than 65 bucks, because they are hydraulic roller. They have about 1000 miles on them but the motor sat for about a year.

5-0stank · October 11th, 2006, 10:17 PM

sorry on the 65 bucks...i was thinking my valve springs (i bought valve springs and lifters at the same time, lol) you can buy them for about $120

Justincredible · October 12th, 2006, 01:25 AM

You can get a new set for around a $120.

Euroeater95 · October 13th, 2006, 01:03 PM

Thanks for all of the help guys, but I turns out that it had stock pushrods in it and the valve springs on Trickflow Twisted Wedge Heads did quite a number on them.

5-0stank · October 13th, 2006, 01:57 PM

that'll do it

October 10th, 2006, 11:38 AM	#1
Euroeater95 Regular Join Date: Sep 2006 Posts: 157	Flat Lifter Whats up guys, I have a 347 Stroker in my 1995 GT Convertible and I had on of my hydraulic lifters go flat and I was wondering if it will pump up all on its own or if I need to replace it?

October 10th, 2006, 10:01 PM	#2
5-0stank Enthusiast Join Date: Sep 2006 Location: emmaus, pa Posts: 508	i would just replace them, are they new??? you can get a set for like 65 bucks __________________ 1995 GT::Sold! Looking for another stang...

October 11th, 2006, 10:17 PM	#4
5-0stank Enthusiast Join Date: Sep 2006 Location: emmaus, pa Posts: 508	sorry on the 65 bucks...i was thinking my valve springs (i bought valve springs and lifters at the same time, lol) you can buy them for about $120 __________________ 1995 GT::Sold! Looking for another stang...

October 12th, 2006, 01:25 AM	#5
Justincredible Regular Join Date: Sep 2006 Location: Ky Posts: 482	You can get a new set for around a $120. __________________ BIVENS RACE CARS

October 13th, 2006, 01:57 PM	#7
5-0stank Enthusiast Join Date: Sep 2006 Location: emmaus, pa Posts: 508	that'll do it __________________ 1995 GT::Sold! Looking for another stang...

October 11th, 2006, 04:47 PM	#3
Euroeater95 Regular Join Date: Sep 2006 Posts: 157	To awnser your question, they are new and I think that they will be more than 65 bucks, because they are hydraulic roller. They have about 1000 miles on them but the motor sat for about a year.

October 13th, 2006, 01:03 PM	#6
Euroeater95 Regular Join Date: Sep 2006 Posts: 157	Thanks for all of the help guys, but I turns out that it had stock pushrods in it and the valve springs on Trickflow Twisted Wedge Heads did quite a number on them.

Threads Similar to: Flat Lifter
Thread	Thread Starter	Forum	Replies	Last Post
flat black?	94v6blkndred	Visual	36	June 12th, 2007 11:57 PM
Lifter tick identification	wanabebuff	5.0 Mustangs	15	June 12th, 2007 07:02 PM
How much lift at lifter?	5literJeff	5.0 Mustangs	2	March 15th, 2007 09:00 PM
stuck lifter	whiteboycustom	5.0 Mustangs	4	March 9th, 2007 06:04 PM
Lifter Tapping... help?	Stan27	99-04	11	February 21st, 2007 12:17 AM

All times are GMT -4. The time now is 03:52 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.