Getting Ready to swap to P.I intake :)

sharkbait · October 21st, 2010, 02:17 AM

Did you give it a real good amount of rtv?

KV007 · October 21st, 2010, 11:19 AM

yea i did lol.i do not want to take that all off again so it better not leak, and if i have to then i gotta get some different bolts because the bolts on the throttle body will be close to stripped if i take them off again

EDIT: 1,000 POST YEA BABY THATS MA SHIT RIGHT THER

fsttang96 · October 21st, 2010, 05:44 PM

Did you get that thing fired up yet ?!?! Let me know how much difference it makes in power ! Im doing basicly the same thing here in a few months but im going a little farther by putting headers on porting the NPI heads and putting cams in !! I cant wait till i do it to see how she runs with that PI intake and opening those NPI heads up with the supercharger on it !!

sharkbait · October 21st, 2010, 06:22 PM

Yea bro did it fire up?

KV007 · October 21st, 2010, 07:15 PM

it runs like a beast haha

goes along with the 78mm throttle body and plenum very well! no leaks at all whatsoever either

2vkb · October 21st, 2010, 08:02 PM

good job.. ill be doing this same swap in a couple of weeks..

KV007 · October 21st, 2010, 08:16 PM

well now it just sucked an injector in... wtf lol

tattoo junkiee · October 22nd, 2010, 06:48 AM

Originally Posted by sharkbait

Lol i dont think you really need the alternator bracket.

I never used one

mine just had washers behind the alternator to shim it out a lil bit so the belt doesnt rub the timing chain cover...(cost me a belt but live and lern lol)

October 21st, 2010, 02:17 AM	#41
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	Did you give it a real good amount of rtv? __________________ 410rwhp 520rwtq @ 12.9 psi

October 21st, 2010, 11:19 AM	#42
KV007 Hardcore Enthusiast 2003 Mustang Gt Slow Join Date: Jul 2009 Location: redding,california Posts: 2,532 Blog Entries: 2 iTrader: 2 reviews	yea i did lol.i do not want to take that all off again so it better not leak, and if i have to then i gotta get some different bolts because the bolts on the throttle body will be close to stripped if i take them off again EDIT: 1,000 POST YEA BABY THATS MA SHIT RIGHT THER __________________ 409rwhp at 4500 rpms.Vortech V1 Intercooled,kurgan motorsports powerpipe, 3.12 pulley, all Mac Exhaust,Sct Tuner,Bolt Ons,Cobra Brakes,MM cc plates,Vis 2000 cobra r hood,MGW shifter,Strange 31 Spline axles,Eaton Possi

October 21st, 2010, 05:44 PM	#43
fsttang96 Regular 1996 Mustang GT need tuned Join Date: Oct 2007 Location: Shanksville, PA Posts: 161 iTrader: 1 reviews	Did you get that thing fired up yet ?!?! Let me know how much difference it makes in power ! Im doing basicly the same thing here in a few months but im going a little farther by putting headers on porting the NPI heads and putting cams in !! I cant wait till i do it to see how she runs with that PI intake and opening those NPI heads up with the supercharger on it !! __________________ 1 of 829 made Bright Tangerine Orange 10Lb Vortech V2,CXRacing FMIC MHS Stage 2 Blower cams,39# Injectors PI Intake,Ported and Polished NPI Heads BBK Headers,78mm BBK Throttle Body Mac H Pipe,2.5 inch Flowmaster Exhaust ,373 Gears

October 21st, 2010, 06:22 PM	#44
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	Yea bro did it fire up? __________________ 410rwhp 520rwtq @ 12.9 psi

October 21st, 2010, 07:15 PM	#45
KV007 Hardcore Enthusiast 2003 Mustang Gt Slow Join Date: Jul 2009 Location: redding,california Posts: 2,532 Blog Entries: 2 iTrader: 2 reviews	it runs like a beast haha goes along with the 78mm throttle body and plenum very well! no leaks at all whatsoever either __________________ 409rwhp at 4500 rpms.Vortech V1 Intercooled,kurgan motorsports powerpipe, 3.12 pulley, all Mac Exhaust,Sct Tuner,Bolt Ons,Cobra Brakes,MM cc plates,Vis 2000 cobra r hood,MGW shifter,Strange 31 Spline axles,Eaton Possi

October 21st, 2010, 08:02 PM	#46
2vkb Newbie 1997 mustang gt n/a Join Date: Oct 2010 Location: Sf Bay area Posts: 27 iTrader: 1 reviews	good job.. ill be doing this same swap in a couple of weeks..

October 21st, 2010, 08:16 PM	#47
KV007 Hardcore Enthusiast 2003 Mustang Gt Slow Join Date: Jul 2009 Location: redding,california Posts: 2,532 Blog Entries: 2 iTrader: 2 reviews	well now it just sucked an injector in... wtf lol __________________ 409rwhp at 4500 rpms.Vortech V1 Intercooled,kurgan motorsports powerpipe, 3.12 pulley, all Mac Exhaust,Sct Tuner,Bolt Ons,Cobra Brakes,MM cc plates,Vis 2000 cobra r hood,MGW shifter,Strange 31 Spline axles,Eaton Possi

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Getting Ready to swap to P.I intake :)
Thread	Thread Starter	Forum	Replies	Last Post
intake swap	brandywine112972	96-98	13	June 1st, 2010 10:26 PM
almost ready for swap	JStang14	96-98	6	March 17th, 2008 11:00 PM
pi intake - help, getting ready to order	Jucostud	96-98	21	February 27th, 2008 11:33 AM
95' Mustang 5.0 HO intake swap for 93 cobra intake...	stang9587	5.0 Mustangs	1	April 3rd, 2007 05:20 AM

All times are GMT -4. The time now is 09:08 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.