Cam Swap On SOHC 4.6 1998 GT

gtdan · December 9th, 2007, 10:22 PM

will i even need to get that tool, and how does it work ?

atrains-gt · December 10th, 2007, 11:52 AM

Mine are Windsor cams as well. I may sell them and get some romeo cams or I may just use them. They were only $20.00

Casper98GT · December 10th, 2007, 05:02 PM

gtdan....you can get the tool and give it a try with it. But like i stated be very careful. If you mess up, then youre just gonna have to retime it. If you take the front cover off, you will have to do everything as well. With Romeo cams you can just zip off the bolt and zip-tie everything in place. Windsor cams you cant.

gtdan · December 10th, 2007, 06:13 PM

thanx bro!

Fastback91 · February 9th, 2008, 05:19 PM

so what did your car dyno?

tom2000r · February 26th, 2008, 08:07 AM

nice work,,mine was a 2000 with pressed on gears.had to remove front cover..and install bolt on cam gears,spacers,washers....

whtstang97 · April 2nd, 2008, 12:25 AM

Hey well 1st let me say you guys are the bomb to let others know info that's really hard to get when you are never near a shop or know what to do. I look in all the magazines and catalogs and they all say that the new pi intake doesn't fit the 96-98 heads but how did you do it. i'm planing to get the cams and intake but not swap the heads.

quickstang281 · April 9th, 2008, 06:04 PM

okay i'm havin bigtime problems timing my car after the pi cam swap. anyone know a shortcut or secret to doin it?

gtdan · April 9th, 2008, 06:15 PM

http://phatdoggy.home.comcast.net/~phatdoggy/sohc_timing.htm

maybe this will help you out ! good luck!!

Blower Head · April 13th, 2008, 11:56 AM

Just did the cam swap using take outs from a supercharged pi saleen. At the same time I installed new seals, springs and had some valve spring retainers milled down for extra clearance. I haven't had it dynoed since before I did the pi intake swap using instructions from these forums, so we will see as I have an appointment for that tommorrow. So far I think it was worth it from a seat of the pants, we will see what the dyno says tommorow.

jlaw98gt · May 15th, 2008, 04:19 PM

Where do i get that timing tool? and i think for now i might throw the stage I cms cams in it...i dont think i need new springs with those cams right?

dopeman(me) · May 15th, 2008, 04:57 PM

right on man

December 9th, 2007, 10:22 PM	#101
gtdan Regular 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 482	will i even need to get that tool, and how does it work ? __________________ eibach lowering springs,pro 5.0 short shifter,p.i intake,p.i cams,bassani x pipe.hope i can tune today! soon to come, ford racing 4:10s,some boost !!!

December 10th, 2007, 11:52 AM	#102
atrains-gt Newbie Join Date: Dec 2007 Posts: 10	Mine are Windsor cams as well. I may sell them and get some romeo cams or I may just use them. They were only $20.00 __________________ 3.73 gears, K&N intake, MGW short shifter installed (PI intake,cams and suspension also in the works)

December 10th, 2007, 06:13 PM	#104
gtdan Regular 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 482	thanx bro! __________________ eibach lowering springs,pro 5.0 short shifter,p.i intake,p.i cams,bassani x pipe.hope i can tune today! soon to come, ford racing 4:10s,some boost !!!

February 9th, 2008, 05:19 PM	#105
Fastback91 Enthusiast 1997 Mustang GT Auto 4rd fastests car @ Highschool Join Date: Aug 2007 Location: California Posts: 881	so what did your car dyno? __________________ Mustang GT:K&N CAI FIpk gen2,Magnaflow Mufflers, Alumnium IntakeManifold,Royal Purple performance Oil Upcoming mods: dunno what ever i can get i guesss maybe SFC,or 70mm Throttle body.

April 9th, 2008, 06:15 PM	#109
gtdan Regular 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 482	http://phatdoggy.home.comcast.net/~phatdoggy/sohc_timing.htm maybe this will help you out ! good luck!! __________________ eibach lowering springs,pro 5.0 short shifter,p.i intake,p.i cams,bassani x pipe.hope i can tune today! soon to come, ford racing 4:10s,some boost !!!

February 26th, 2008, 08:07 AM	#106
tom2000r Enthusiast Join Date: Jan 2008 Location: ohio Posts: 753	nice work,,mine was a 2000 with pressed on gears.had to remove front cover..and install bolt on cam gears,spacers,washers....

April 2nd, 2008, 12:25 AM	#107
whtstang97 Newbie 1997 Mustang Gt 14.0 @ 99mph Join Date: Apr 2008 Location: Texas Posts: 25	Hey well 1st let me say you guys are the bomb to let others know info that's really hard to get when you are never near a shop or know what to do. I look in all the magazines and catalogs and they all say that the new pi intake doesn't fit the 96-98 heads but how did you do it. i'm planing to get the cams and intake but not swap the heads.

April 9th, 2008, 06:04 PM	#108
quickstang281 Regular 1998 Mustang GT 14.6 @ 96 Join Date: Aug 2007 Location: New Jersey Posts: 82	okay i'm havin bigtime problems timing my car after the pi cam swap. anyone know a shortcut or secret to doin it?

April 13th, 2008, 11:56 AM	#110
Blower Head Newbie Join Date: Oct 2007 Location: blaine, MN Posts: 25	Just did the cam swap using take outs from a supercharged pi saleen. At the same time I installed new seals, springs and had some valve spring retainers milled down for extra clearance. I haven't had it dynoed since before I did the pi intake swap using instructions from these forums, so we will see as I have an appointment for that tommorrow. So far I think it was worth it from a seat of the pants, we will see what the dyno says tommorow. __________________ 96 GT Convertable vortech s/c w/aftercooler 98 Expedition vortech s/c w/aftercooler

May 15th, 2008, 04:19 PM	#111
jlaw98gt Hardcore Enthusiast 1998 mustang gt 12.6@110 Join Date: Dec 2007 Location: northern new jersey Posts: 1,775	Where do i get that timing tool? and i think for now i might throw the stage I cms cams in it...i dont think i need new springs with those cams right? __________________ ECCAFA NJS 98 gt with a few bolt ons

May 15th, 2008, 04:57 PM	#112
dopeman(me) Newbie 96 .000000000000001 Join Date: May 2008 Location: NortherN Cali4nia Posts: 34	right on man __________________ I got that vtech

Threads Similar to: Cam Swap On SOHC 4.6 1998 GT
Thread	Thread Starter	Forum	Replies	Last Post
99-04 SOHC 4.6	Invictus	Want to Buy	4	January 30th, 2008 08:24 PM
please help me 4.6 sohc gt	natedawgishot	99-04	15	September 18th, 2007 11:11 PM
96 sohc swap to 04 terminator motor	1quick96	Modular Mustangs	3	March 20th, 2007 05:49 PM
SOHC to DOHC motor swap	Invictus	99-04	15	March 12th, 2007 12:08 PM
V8 4.6 SOHC	The eaglenator	General Tech	6	October 9th, 2006 11:17 PM

All times are GMT -4. The time now is 02:14 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.