Cam

sampson89 · December 18th, 2011, 08:00 PM

I will be building my engine over the next couple months and I was going to put forged internals with deep dished pistons. Trickflow 75 mm plenum and TB. PI heads that are ported and polished with a Kenne Bell to finish her off. Now don't worry suspension is built. She has 3.73 in the back. She has 285's (Tires) on the back and she has a complete exhaust system that is from BBK that includes Long Tube Headers Flowmaster exhaust, and Offroad x pipe. She has also has camber plates and msd ignition coils and a short throw and the list goes on (Also front Brembo's)... She is good to go for what I want to do and I am so excited! However... I am stuck on the Cam... I will be putting the Supercharger on her and I am not sure where to go Cam wise... I was thinking Trickflow or Comp. I didn't want to use the straight PI Cam cause I was hoping for a bit better Cam. Anyone have suggestions for a good Cam that wont be to rough but will be an improvement upon what the PI Cam would be capable of. thnx yall

NO_PI_NO_POWER · December 18th, 2011, 09:00 PM

Here is one that seems to work pretty well.
MPH Kenne Bell 2 Valve Cam's - Mustang Parts | Mr. Norm's Garage

Edit: larger than stock...

sampson89 · December 22nd, 2011, 11:04 AM

Lol that was easy.

NO_PI_NO_POWER · December 22nd, 2011, 05:30 PM

97 Mustang GT Kenne Bell Short Idle Vid - YouTube

December 18th, 2011, 08:00 PM	#1
sampson89 Regular 1997 Mustang GT Join Date: Aug 2011 Location: Clanton, Al Posts: 70 iTrader: 0 reviews	Cam I will be building my engine over the next couple months and I was going to put forged internals with deep dished pistons. Trickflow 75 mm plenum and TB. PI heads that are ported and polished with a Kenne Bell to finish her off. Now don't worry suspension is built. She has 3.73 in the back. She has 285's (Tires) on the back and she has a complete exhaust system that is from BBK that includes Long Tube Headers Flowmaster exhaust, and Offroad x pipe. She has also has camber plates and msd ignition coils and a short throw and the list goes on (Also front Brembo's)... She is good to go for what I want to do and I am so excited! However... I am stuck on the Cam... I will be putting the Supercharger on her and I am not sure where to go Cam wise... I was thinking Trickflow or Comp. I didn't want to use the straight PI Cam cause I was hoping for a bit better Cam. Anyone have suggestions for a good Cam that wont be to rough but will be an improvement upon what the PI Cam would be capable of. thnx yall

December 18th, 2011, 09:00 PM	#2
NO_PI_NO_POWER Granny Shifter 1997 Mustang GT 12.297@113.47 Join Date: Jul 2008 Location: Greeley, CO Posts: 752 iTrader: 0 reviews	Here is one that seems to work pretty well. MPH Kenne Bell 2 Valve Cam's - Mustang Parts \| Mr. Norm's Garage Edit: larger than stock... __________________ 1997 GT 2.6L Kenne Bell Build Thread 1989 LX Last edited by NO_PI_NO_POWER; December 18th, 2011 at 09:03 PM. Reason: More info

December 22nd, 2011, 11:04 AM	#3
sampson89 Regular 1997 Mustang GT Join Date: Aug 2011 Location: Clanton, Al Posts: 70 iTrader: 0 reviews	Lol that was easy.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 11:02 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.