Any prochamber users?

mustangmaniac95 · January 31st, 2012, 11:09 AM

Whatsup guys? I'm picking up my 97 cobra on the 25th and has full maxim motorsports suspension, but for exhaust it only has flowmaster mufflers. My plans when I first got it were to get SLP LM1 catback with a prochamber. My only worry about the prochamber is the ground clearance since it has the chambered box part.
If I don't get a prochamber, I'm going with the SLP catted X pipe
Thanks for any help

AdaBoNGT · February 2nd, 2012, 09:25 PM

The chambered box part shouldn't be an issue with ground clearance. It's really not that much thicker than the actual pipes themselves.

JK7208 · February 3rd, 2012, 09:49 PM

I have mac lts and the pro-chamber w/o any clearance issues

p4ndiamond · February 3rd, 2012, 11:46 PM

See any increase in performance with this setup ?

January 31st, 2012, 11:09 AM	#1
mustangmaniac95 Hardcore Enthusiast 1995 Mustang GT Join Date: Nov 2010 Location: New Orleans Posts: 1,192 iTrader: 2 reviews	Any prochamber users? Whatsup guys? I'm picking up my 97 cobra on the 25th and has full maxim motorsports suspension, but for exhaust it only has flowmaster mufflers. My plans when I first got it were to get SLP LM1 catback with a prochamber. My only worry about the prochamber is the ground clearance since it has the chambered box part. If I don't get a prochamber, I'm going with the SLP catted X pipe Thanks for any help __________________ 95 GT: JLTcai, Flow40s, o/r Xpipe, lowering springs, cobra brakes, cobra rims, sbfc, shocks/struts, trickflow170 heads (1.6rr), cobra intake, custom cam, 75mm MAF, 75mmtb, bbk shorty headers, 24#injectors, 3.73 gears, mach 1 chin spoiler.

February 2nd, 2012, 09:25 PM	#2
AdaBoNGT Regular 1998 Mustang GT Vert Join Date: Nov 2009 Location: Pittsburgh, Pa Posts: 208 iTrader: 0 reviews	The chambered box part shouldn't be an issue with ground clearance. It's really not that much thicker than the actual pipes themselves. __________________ 98 GT conv. PI intake, MHS stage III ported PI heads/Stage 3R Bullet Cams, CAI, 90mm MAF, BBK 78mm TB, LT headers, Mac prochamber, FRPP underdrive pullies, FRPP 4.10's, Flowmaster cat back.

February 3rd, 2012, 09:49 PM	#3
JK7208 Regular 1996 mustang gt 13.07@104.66 Join Date: Oct 2009 Location: frackville, pa Posts: 126 iTrader: 0 reviews	I have mac lts and the pro-chamber w/o any clearance issues __________________ 1996 GT 5-SPEED PI SWAP Trick Flow 75mm TB/PL BBK CAI, UDP, Mac Longtubes and offroad Prochamber SCT tuner Seeda Triax Short Throw Shifter 3.73 Ford Racing gears 278rwhp/295rwtq

February 3rd, 2012, 11:46 PM	#4
p4ndiamond Hardcore Enthusiast 1997 Pacific Green Cobra 14.80 No traction Join Date: May 2010 Location: New Orleans Posts: 1,216 iTrader: 0 reviews	See any increase in performance with this setup ? __________________ GT ENGINE (temporary) 4.30 Gears , 31 spline Moser axles , Detroit tru Trac diff, Jmod 4r70w , Pi intake Hitech stage 2 cam, Vortech V2 3.33 pulley. Alum drive shaft. Lowering kit x2 ball joints ,screamin demon coils, LCA "

Threads Similar to: Any prochamber users?
Thread	Thread Starter	Forum	Replies	Last Post
O/R Prochamber vs Catted Prochamber	auburntiger7231	99-04	9	June 30th, 2009 09:47 PM
mac users	ZoomZoomMFer	The Clubhouse	18	June 27th, 2008 01:28 PM
381 users online	06RedfireGT	The Clubhouse	1	November 7th, 2007 08:36 PM
KB users	DrHolliday	99-04	9	April 16th, 2007 09:12 PM
Any PS2 users	89LX50	The Clubhouse	18	October 29th, 2005 11:43 AM

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 07:57 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.