want to lower about 1"

droppedbass87 · June 17th, 2007, 01:43 AM

hey guys i just want to lower my front and back 1" all the way around..what should i get to do this and what kind cuz i work at firestone and me and my dad hav our own shop...i just need to know what to get..im getting 10.5s in the back and i want the fenderwells to be flushed with the wheels...

nes · June 17th, 2007, 02:05 AM

i would say c springs with the isolators....

01whitecobra · June 17th, 2007, 02:38 AM

mine had 1 1/2 steeda's all the way around and had an awesome stance. when i went solid i couldnt reuse the steeda springs in the rear so i went coilovers. the ass end sits a bit higher but it looks damn good.

Ryan Paymaster · June 17th, 2007, 11:35 AM

Does the drag launch spring kit w/ airbag lower the car any?

droppedbass87 · June 17th, 2007, 02:13 PM

well im thinking about getting some frpp springs

nes · June 17th, 2007, 02:15 PM

you will be satisfied with them, i love mine. sucks i dont have any pics right now(no camera) but ill get some to show off in the future lol...

droppedbass87 · June 17th, 2007, 04:48 PM

ok cool thanks alot nes...

MustangMatt96GT · June 17th, 2007, 09:43 PM

Man I have a proline kit and I like it a lot!! But will eventally switch to ethier drag springs, or fox 4 cylinder springs!!

droppedbass87 · June 17th, 2007, 11:40 PM

yours doesnt look lowered matt

droppedbass87 · June 17th, 2007, 11:42 PM

yours doesnt look lowered matt

MustangMatt96GT · June 18th, 2007, 10:29 AM

Yeah It has the Eibach kit on there! Here are some pictures!

AnglicoGT98 · June 18th, 2007, 11:10 AM

MustangMatt- How much is your car lowered and did you have to get any C/C plates or did you just get an alignment? I want to lower mine 1 inch as well but not have it slammed (I have a body kit). I like the drop on yours.

MustangMatt96GT · June 18th, 2007, 11:20 AM

Well I have the Eibach Proline kit! I recommend C/C plates, but when I bought the car it didnt have them! I also have yet to get an alignment, because the stupid shops around here say that to align it I have to get new tie rods and blah blah blah! lol

AnglicoGT98 · June 18th, 2007, 11:36 AM

I was looking at the C Springs. I hear that for the 1 inch drop they do I won't have to get C/C plates. I just need to get them aligned. Yeah, I have heard car shops say that kind of crap. I don't think just a regular alignment isn't too lucrative for them so they through in the extra BS!

nes · June 18th, 2007, 01:04 PM

Originally Posted by AnglicoGT98

I was looking at the C Springs. I hear that for the 1 inch drop they do I won't have to get C/C plates. I just need to get them aligned. Yeah, I have heard car shops say that kind of crap. I don't think just a regular alignment isn't too lucrative for them so they through in the extra BS!

u dont need cc plates, they are reccommended for alot of springs. i also never used the cc plates and have yet to get it aligned... just dont feel like paying for it until i get new tires...

droppedbass87 · June 18th, 2007, 01:49 PM

nice car nes...awesome pic..and hey matt that looks nice man..

RockerShocker · June 19th, 2007, 03:36 PM

Steeda is for sure the way to go if you only want 1in. Do the steeda and keep the isolators, you will be right where your looking for.

nes · June 19th, 2007, 05:16 PM

Originally Posted by droppedbass87

nice car nes...awesome pic..and hey matt that looks nice man..

its an old pic, about 7 months old, i have since got the spoiler painted, a cobra hood, 98cobra wheels, and the c springs installed...

but thanks i appreciate the kind words.

droppedbass87 · June 19th, 2007, 06:35 PM

no prob man you need to get a pic up of it now..

June 17th, 2007, 01:43 AM	#1
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,877	want to lower about 1" hey guys i just want to lower my front and back 1" all the way around..what should i get to do this and what kind cuz i work at firestone and me and my dad hav our own shop...i just need to know what to get..im getting 10.5s in the back and i want the fenderwells to be flushed with the wheels... __________________ fraziers transmission service..

June 17th, 2007, 02:38 AM	#3
01whitecobra Regular 2001 cobra Join Date: Mar 2007 Location: Oklahoma Posts: 123	mine had 1 1/2 steeda's all the way around and had an awesome stance. when i went solid i couldnt reuse the steeda springs in the rear so i went coilovers. the ass end sits a bit higher but it looks damn good. __________________

June 17th, 2007, 02:13 PM	#5
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,877	well im thinking about getting some frpp springs __________________ fraziers transmission service..

June 17th, 2007, 04:48 PM	#7
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,877	ok cool thanks alot nes... __________________ fraziers transmission service..

June 17th, 2007, 09:43 PM	#8
MustangMatt96GT I Post Entirely Way Too Much 1996 Mustang GT 13.582@97.59 @ 5800 FT Join Date: Dec 2006 Location: Lakewood, CO Posts: 7,141	Man I have a proline kit and I like it a lot!! But will eventally switch to ethier drag springs, or fox 4 cylinder springs!! __________________ We expect shit to break, look foward to realizing exactly when it is happening, and than obsess about dropping plenty of cash to rebuild stronger, so we can try to run it hard as hell and break again. We are sick individuals.

June 17th, 2007, 11:35 AM	#4
Ryan Paymaster Enthusiast 1996 Ford SVT Cobra 13.36@102 Join Date: Jun 2007 Location: Plainfield, IL USA Posts: 556	Does the drag launch spring kit w/ airbag lower the car any?

June 17th, 2007, 02:15 PM	#6
nes Enthusiast Join Date: May 2007 Posts: 948	you will be satisfied with them, i love mine. sucks i dont have any pics right now(no camera) but ill get some to show off in the future lol...

June 17th, 2007, 11:40 PM	#9
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,877	yours doesnt look lowered matt __________________ fraziers transmission service..

June 17th, 2007, 11:42 PM	#10
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,877	yours doesnt look lowered matt __________________ fraziers transmission service..

June 18th, 2007, 10:29 AM	#11
MustangMatt96GT I Post Entirely Way Too Much 1996 Mustang GT 13.582@97.59 @ 5800 FT Join Date: Dec 2006 Location: Lakewood, CO Posts: 7,141	Yeah It has the Eibach kit on there! Here are some pictures! __________________ We expect shit to break, look foward to realizing exactly when it is happening, and than obsess about dropping plenty of cash to rebuild stronger, so we can try to run it hard as hell and break again. We are sick individuals.

June 18th, 2007, 11:10 AM	#12
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 633	MustangMatt- How much is your car lowered and did you have to get any C/C plates or did you just get an alignment? I want to lower mine 1 inch as well but not have it slammed (I have a body kit). I like the drop on yours. __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

June 18th, 2007, 11:20 AM	#13
MustangMatt96GT I Post Entirely Way Too Much 1996 Mustang GT 13.582@97.59 @ 5800 FT Join Date: Dec 2006 Location: Lakewood, CO Posts: 7,141	Well I have the Eibach Proline kit! I recommend C/C plates, but when I bought the car it didnt have them! I also have yet to get an alignment, because the stupid shops around here say that to align it I have to get new tie rods and blah blah blah! lol __________________ We expect shit to break, look foward to realizing exactly when it is happening, and than obsess about dropping plenty of cash to rebuild stronger, so we can try to run it hard as hell and break again. We are sick individuals.

June 18th, 2007, 11:36 AM	#14
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 633	I was looking at the C Springs. I hear that for the 1 inch drop they do I won't have to get C/C plates. I just need to get them aligned. Yeah, I have heard car shops say that kind of crap. I don't think just a regular alignment isn't too lucrative for them so they through in the extra BS! __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

June 18th, 2007, 01:49 PM	#16
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,877	nice car nes...awesome pic..and hey matt that looks nice man.. __________________ fraziers transmission service..

June 19th, 2007, 03:36 PM	#17
RockerShocker Newbie Join Date: Apr 2007 Location: Yuba City, CA Posts: 48	Steeda is for sure the way to go if you only want 1in. Do the steeda and keep the isolators, you will be right where your looking for. __________________ Fast, Cheap or Reliable. You get to pick TWO!

Threads Similar to: want to lower about 1"
Thread	Thread Starter	Forum	Replies	Last Post
""ON EBAY 1 DAY LEFT 88 MUSTANG GT""	NYHigH	For Sale	5	November 29th, 2007 07:38 PM
List of "unique" tools for Header install:Swivel S	Smoothgrandmama	99-04	14	October 19th, 2007 06:32 PM
Bosch "Iridium" 4-prong spark plugs - Anybody use	TCSoff	2005+	5	July 11th, 2007 09:19 PM
The return of "Stone Cold" Steve Austin	homebrewed	The Clubhouse	19	April 21st, 2007 12:27 PM
"Chrome Deep Dish Bullits" PICS Comments wanted...	mediaultra	V6 Mustangs	12	October 21st, 2006 07:27 PM

All times are GMT -4. The time now is 12:05 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

June 19th, 2007, 06:35 PM	#19
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,877	no prob man you need to get a pic up of it now.. __________________ fraziers transmission service..