Picture of completed PI swap

ckjacobus · August 18th, 2007, 10:15 PM

after I cleaned everything up

MustangMatt96GT · August 18th, 2007, 10:20 PM

where did you get those valve covers? are the stock ones just painted?

ckjacobus · August 18th, 2007, 10:28 PM

yes they are, I cleaned and scuffed up the stock ones and then painted them with 1200 degree paint. They are still a little dirty from the install but they look ok

MustangMatt96GT · August 18th, 2007, 10:34 PM

I like the look! Maybe I will go with that color!!!

stanglifemike · August 18th, 2007, 10:39 PM

Looks nice man, very nice

TheUNZippee! · August 18th, 2007, 10:41 PM

Nice work man, it looks great

AnglicoGT98 · August 19th, 2007, 06:47 AM

Looks good! Very clean!

droppedbass87 · August 19th, 2007, 05:48 PM

yeah it does look good..i may go with gunmetal..

AnglicoGT98 · August 19th, 2007, 06:13 PM

These are nice too....

droppedbass87 · August 19th, 2007, 06:17 PM

where u see those at angilco??

MustangMatt96GT · August 19th, 2007, 06:31 PM

Those are nice! But for that price I dont want to be advertizing for somebody!

AnglicoGT98 · August 20th, 2007, 06:50 AM

They were only like $250. I mean, it is def. alot cheaper to just paint the stock ones but I had some extra cash and these do look really good under the hood! I got them at Jegs.

RandoGT · August 20th, 2007, 09:59 PM

what intake is that? or did you just paint it?

ujslost · August 20th, 2007, 10:44 PM

I guess I get to be the asshole here, but you REALLY need to get the alternator bracket on there and clean up the plug wires a bit. But Im going to just assume this is a temporary deal Im seeing.

Dennis-96GT · August 20th, 2007, 11:15 PM

the pi intal itself looks good but i gotta agree with ^^^^ need some cleanup on the wires but yea looks good

Fryrice · August 21st, 2007, 06:47 AM

Originally Posted by AnglicoGT98

They were only like $250. I mean, it is def. alot cheaper to just paint the stock ones but I had some extra cash and these do look really good under the hood! I got them at Jegs.

Ive talked to a few people who have had leakage problems with those. I hope you dont have any. They do look nice though.

ckjacobus · August 21st, 2007, 07:44 AM

Yes the plug wires are temporary I am just trying to find some clamps that are big enough to fit the 9mm wires. The stock ones were way to small. I am also in the process of modifying the altenator bracket so I can fit it back on there. There will be only one bolt but everyone else has told me that is all that they are running as well. And as for the one who asked about what intake that is, it is the typhoon intake. So far no leaks and pulls good.

Fryrice · August 21st, 2007, 03:36 PM

Dude,just order a new bracket from Randy at Liberty Ford. He can have it to you by tomorrow if you call him now.

August 18th, 2007, 10:20 PM	#2
MustangMatt96GT All Throttle with a Bottle 1996 Mustang GT 12.91@105.29 @ 5800 FT Join Date: Dec 2006 Location: Lakewood, CO Posts: 7,609	where did you get those valve covers? are the stock ones just painted? __________________ We expect shit to break, look foward to realizing exactly when it is happening, and than obsess about dropping plenty of cash to rebuild stronger, so we can try to run it hard as hell and break again. We are sick individuals. I support the MM Staff

August 18th, 2007, 10:28 PM	#3
ckjacobus Newbie Join Date: Jun 2007 Posts: 37	yes they are, I cleaned and scuffed up the stock ones and then painted them with 1200 degree paint. They are still a little dirty from the install but they look ok __________________ 96 GT, CAI, 75mm TB, PP Plenum, typhoon intake manifold, BBK shorties, flowmaster catack, UPR x pipe, FRPP 9mm race wires, complete PI swap

August 18th, 2007, 10:34 PM	#4
MustangMatt96GT All Throttle with a Bottle 1996 Mustang GT 12.91@105.29 @ 5800 FT Join Date: Dec 2006 Location: Lakewood, CO Posts: 7,609	I like the look! Maybe I will go with that color!!! __________________ We expect shit to break, look foward to realizing exactly when it is happening, and than obsess about dropping plenty of cash to rebuild stronger, so we can try to run it hard as hell and break again. We are sick individuals. I support the MM Staff

August 18th, 2007, 10:39 PM	#5
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,320	Looks nice man, very nice __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto DR's, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips, BMR RadMustangs Store

August 19th, 2007, 06:47 AM	#7
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 630	Looks good! Very clean! __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

August 19th, 2007, 05:48 PM	#8
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,896	yeah it does look good..i may go with gunmetal.. __________________ fraziers transmission service..

August 19th, 2007, 06:17 PM	#10
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,896	where u see those at angilco?? __________________ fraziers transmission service..

August 20th, 2007, 06:50 AM	#12
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 630	They were only like $250. I mean, it is def. alot cheaper to just paint the stock ones but I had some extra cash and these do look really good under the hood! I got them at Jegs. __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

August 20th, 2007, 09:59 PM	#13
RandoGT Enthusiast 1998 Mustang GT Need to hit the track Join Date: May 2007 Location: Katy, TX Posts: 851	what intake is that? or did you just paint it?

August 20th, 2007, 10:44 PM	#14
ujslost MM Fanatic Join Date: Mar 2007 Location: Albertville, AL Posts: 3,861	I guess I get to be the asshole here, but you REALLY need to get the alternator bracket on there and clean up the plug wires a bit. But Im going to just assume this is a temporary deal Im seeing.

August 20th, 2007, 11:15 PM	#15
Dennis-96GT The Great Unknown 1996 Mustang GT 11h47m32s Join Date: Sep 2006 Location: ozark mo Posts: 1,006	the pi intal itself looks good but i gotta agree with ^^^^ need some cleanup on the wires but yea looks good __________________ MEMBERS AGAINST STREET RACING

August 21st, 2007, 07:44 AM	#17
ckjacobus Newbie Join Date: Jun 2007 Posts: 37	Yes the plug wires are temporary I am just trying to find some clamps that are big enough to fit the 9mm wires. The stock ones were way to small. I am also in the process of modifying the altenator bracket so I can fit it back on there. There will be only one bolt but everyone else has told me that is all that they are running as well. And as for the one who asked about what intake that is, it is the typhoon intake. So far no leaks and pulls good. __________________ 96 GT, CAI, 75mm TB, PP Plenum, typhoon intake manifold, BBK shorties, flowmaster catack, UPR x pipe, FRPP 9mm race wires, complete PI swap

August 21st, 2007, 03:36 PM	#18
Fryrice Hardcore Enthusiast Join Date: Oct 2006 Location: VA Posts: 2,034	Dude,just order a new bracket from Randy at Liberty Ford. He can have it to you by tomorrow if you call him now. __________________ Fryrice has left the building.

Threads Similar to: Picture of completed PI swap
Thread	Thread Starter	Forum	Replies	Last Post
homemade strut tower brace...completed	fakesaleen	Suspension	15	May 23rd, 2008 10:50 PM
Wow my goal is completed!	mustangmanic	Street	48	September 13th, 2007 10:23 PM
Picture	2000Mustang	V6 Mustangs	41	December 15th, 2006 06:48 PM
My first picture	psycho bob	2005+	6	December 10th, 2006 03:51 PM
picture???	ttop5.0	New Members Introductions	3	June 21st, 2006 07:56 PM

All times are GMT -4. The time now is 06:38 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.