pi swap

97_stang_gt · August 19th, 2007, 02:07 AM

ok i have a 97 gt and i want to do the full pi swap....this is getting relle confusing so can someone just please tell me everything i need to do the whole swap.....all misc. parts and stuff...i just want to know everything that i need so i can do it right the first time....

droppedbass87 · August 19th, 2007, 02:19 AM

you can get a whole kit on ebay..or look on corral.net and then classifieds..you need intake manifold and pi heads and cams..i would get the heads ported and polished

97_stang_gt · August 19th, 2007, 02:22 AM

i already have the intake cams and heads i just need to know of all the little misc stuff that i need for the install...and what i could use off my car

97_stang_gt · August 19th, 2007, 02:28 AM

i already have the intake cams and heads i just need to know of all the little misc stuff that i need for the install...and what i could use off my car

AnglicoGT98 · August 19th, 2007, 06:58 AM

http://www.moddedmustangs.com/forums...tml?highlight=

This is a post we had a little while ago where fryrice and I kind of put everything you will need to do the swap, also some suggestions on what to do while your in there. But I recommend just going to search and typing in "PI Swap" and just start reading. There are ALOT of posts about the swap.

ckjacobus · August 20th, 2007, 07:23 AM

I hear a lot about Randy and his swap kit and I hear that it is really good. I just finished my PI swap but I could not get a hold of him because he was on vacation so if you would like to know what all I needed and what all I reused, just PM me. But the way I love my car now after the swap hope you will enjoy just as much as me.

jbm5781 · August 20th, 2007, 04:24 PM

I bought a kit off of Ebay that came with everything I needed except the fuel injector o-rings. 315 shipped with everything. I know thats a little high but you don't have to worry about running around to different parts stores and dealerships trying to find the right parts

AnglicoGT98 · August 20th, 2007, 05:35 PM

FYI Randy isn't at Modular Depot anymore. But they still have a parts forum. Some chick is running it. But you can get Randy at Americn Muscle and Modular Misfits.

Fryrice · August 21st, 2007, 06:54 AM

Originally Posted by AnglicoGT98

FYI Randy isn't at Modular Depot anymore. But they still have a parts forum. Some chick is running it. But you can get Randy at Americn Muscle and Modular Misfits.

Lol ,Kelley is actually a guy. Dont feel bad, he gets that all the time. MD blows now anyways.

But yeah,I still get all my OEM parts from Randy. Hes always cheaper and ships really fast. The best part is that hes a car guy and understands the PI swap process and parts.

He in the parts department at Liberty Ford in Maryland. Hes also on ModularMisfits.com

AnglicoGT98 · August 21st, 2007, 07:22 AM

LOL...yeahhhh. def. didn't she was a he.

August 19th, 2007, 02:07 AM	#1
97_stang_gt Newbie Join Date: Feb 2007 Posts: 49	pi swap ok i have a 97 gt and i want to do the full pi swap....this is getting relle confusing so can someone just please tell me everything i need to do the whole swap.....all misc. parts and stuff...i just want to know everything that i need so i can do it right the first time....

August 19th, 2007, 02:19 AM	#2
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,896	you can get a whole kit on ebay..or look on corral.net and then classifieds..you need intake manifold and pi heads and cams..i would get the heads ported and polished __________________ fraziers transmission service..

August 19th, 2007, 06:58 AM	#5
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 630	http://www.moddedmustangs.com/forums...tml?highlight= This is a post we had a little while ago where fryrice and I kind of put everything you will need to do the swap, also some suggestions on what to do while your in there. But I recommend just going to search and typing in "PI Swap" and just start reading. There are ALOT of posts about the swap. __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

August 20th, 2007, 07:23 AM	#6
ckjacobus Newbie Join Date: Jun 2007 Posts: 37	I hear a lot about Randy and his swap kit and I hear that it is really good. I just finished my PI swap but I could not get a hold of him because he was on vacation so if you would like to know what all I needed and what all I reused, just PM me. But the way I love my car now after the swap hope you will enjoy just as much as me. __________________ 96 GT, CAI, 75mm TB, PP Plenum, typhoon intake manifold, BBK shorties, flowmaster catack, UPR x pipe, FRPP 9mm race wires, complete PI swap

August 20th, 2007, 04:24 PM	#7
jbm5781 Regular Join Date: Apr 2007 Location: Hattiesburg,MS Posts: 234	I bought a kit off of Ebay that came with everything I needed except the fuel injector o-rings. 315 shipped with everything. I know thats a little high but you don't have to worry about running around to different parts stores and dealerships trying to find the right parts __________________ Who cares what your import looks like... They'll all be laughing at you at the finish line.

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

August 19th, 2007, 02:22 AM	#3
97_stang_gt Newbie Join Date: Feb 2007 Posts: 49	i already have the intake cams and heads i just need to know of all the little misc stuff that i need for the install...and what i could use off my car

August 19th, 2007, 02:28 AM	#4
97_stang_gt Newbie Join Date: Feb 2007 Posts: 49	i already have the intake cams and heads i just need to know of all the little misc stuff that i need for the install...and what i could use off my car

August 20th, 2007, 05:35 PM	#8
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 630	FYI Randy isn't at Modular Depot anymore. But they still have a parts forum. Some chick is running it. But you can get Randy at Americn Muscle and Modular Misfits. __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

August 21st, 2007, 07:22 AM	#10
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 630	LOL...yeahhhh. def. didn't she was a he. __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

Threads Similar to: pi swap
Thread	Thread Starter	Forum	Replies	Last Post
Can't decide, engine swap or PI swap? A few questions...	k3vin	96-98	24	September 5th, 2007 07:48 PM
3.8 swap to 5.0	goldhorse	V6 Mustangs	1	August 10th, 2007 01:57 AM
Which one is easier??a rear end swap or engine swap?	Bies08	V6 Mustangs	32	April 8th, 2007 08:15 PM
PI Head Swap and Transmission Swap	jEEd	96-98	6	January 6th, 2007 03:37 AM
351 Swap	Cskit1500	5.0 Mustangs	6	November 16th, 2006 08:40 PM

All times are GMT -4. The time now is 05:47 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.