|
|
| Home | Register | FAQ | Members List | Calendar | Blogs | Garage | Gallery | Search | Today's Posts | Mark Forums Read | Insurance |
| | ||||||||||||
| |||||||||||||
|
|||||||
 |
|
|
|
LinkBack | Thread Tools |
December 27th, 2007, 07:09 PM
|
#1 |
|
MM Fanatic
2005 Mustang GT
Join Date: Dec 2007
Location: Cedar Grove NJ
Posts: 3,204
 iTrader: 0 reviews
 |
Help Asap
so i was just driving home from mall and i noticed something was definitly wrong with my car so i told my dad and he drove it and instantly knew somethin was wrong we open the hood and and smell coolant...he thinks its a bad intake gasket...anyone have any ideas...in the meantime im out of a car and he has no time to do it...
|
|
| Sponsored Links | |||
Advertisement | |||
|
December 27th, 2007, 07:10 PM
|
#2 |
|
Proud American
 
1996 Mustang GT
Join Date: Dec 2006
Location: Lakewood, CO
Posts: 10,689
 iTrader: 3 reviews
|
where is the coolant coming from? it could be a cracked intake. They are known to do that. Time for the PI intake swap.
__________________
RIP Travis Billings  Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars |
|
|
|
December 27th, 2007, 07:15 PM
|
#3 |
|
MM Fanatic
2005 Mustang GT
Join Date: Dec 2007
Location: Cedar Grove NJ
Posts: 3,204
iTrader: 0 reviews
|
yea idk its comming from behind it on pass side...i told me dad and for wat another 200 bucks that we should get pi intake
|
|
|
|
December 27th, 2007, 07:17 PM
|
#4 |
|
Proud American
1996 Mustang GT
Join Date: Dec 2006
Location: Lakewood, CO
Posts: 10,689
iTrader: 3 reviews
|
sounds like it could just be a bad hose. Check the hoses, but if not just do the PI swap.
__________________
RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars |
|
|
|
December 27th, 2007, 07:21 PM
|
#5 |
|
MM Fanatic
2005 Mustang GT
Join Date: Dec 2007
Location: Cedar Grove NJ
Posts: 3,204
iTrader: 0 reviews
|
u dont think its gasket...i mean he only looked at it for 5 mins he had to run...where can i get pi intake and hardware...ebay?? or should i just get it from ford coz i need it quick kinda
|
|
|
|
December 27th, 2007, 07:25 PM
|
#6 |
|
Proud American
1996 Mustang GT
Join Date: Dec 2006
Location: Lakewood, CO
Posts: 10,689
iTrader: 3 reviews
|
get it from ford racing. Go to a ford dealership that does Ford Racing. Get 02 GT intake gaskets and get some black RTV silicon, and the heater tube that goes underneth the intake and the new nipple. I have all the part numbers some place
it will take at least a day to get that stuff and expect to pay 300-350 bucks for a rush and the RTV can be picked up at any parts store, but I used Toyota RTV which worked wonders! It could be a gasket too, but you have to take the intake off anyway if it is.
__________________
RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars |
|
|
|
December 27th, 2007, 07:27 PM
|
#7 |
|
MM Fanatic
2005 Mustang GT
Join Date: Dec 2007
Location: Cedar Grove NJ
Posts: 3,204
iTrader: 0 reviews
|
i kno thats wat i was saying to him before he left that if it has to come off anyway there is no sense of putting the old one back on....thats a waste...he agreed but i have no money now...ughh lol
|
|
|
|
December 27th, 2007, 07:34 PM
|
#8 |
|
Proud American
1996 Mustang GT
Join Date: Dec 2006
Location: Lakewood, CO
Posts: 10,689
iTrader: 3 reviews
|
Coolant Tube - XR3Z-18B402-AA - (1 tube)
Coolant Nipple - F75Z-8555-AA - (1 nipple) Thermostat O-Ring - F1VY-8255-A - (1 o-ring) 01+ PI Intake Manifold Assembly – 1W7Z-9424-AB – (1 assembly) 01+ PI Intake Gasket – YL3Z-9439-BA -(1 each for a total of 2)
__________________
RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars |
|
|
|
December 27th, 2007, 07:40 PM
|
#9 |
|
MM Fanatic
2005 Mustang GT
Join Date: Dec 2007
Location: Cedar Grove NJ
Posts: 3,204
iTrader: 0 reviews
|
sweet thanks...i just talked to my dad i dont think hes intrested in doing swap now tho..he has no time...hes jsut changin gasket i think...who knows but i wrote down numbers and i'll make a trip to ford tomorrow there is one down the road from my hosue...thanks matt
|
|
|
|
December 27th, 2007, 07:45 PM
|
#10 |
|
Proud American
1996 Mustang GT
Join Date: Dec 2006
Location: Lakewood, CO
Posts: 10,689
iTrader: 3 reviews
|
well for 20 minutes extra work it is well worth it. And I doubt its a gasket. I havent ever seen a gasket go bad just the whole intake go bad.
__________________
RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars |
|
|
|
December 27th, 2007, 07:47 PM
|
#11 |
|
MM Fanatic
2005 Mustang GT
Join Date: Dec 2007
Location: Cedar Grove NJ
Posts: 3,204
iTrader: 0 reviews
|
i didnt mean time lol..i meant money..
|
|
|
| Sponsored Links | |
Advertisement | |
|
| Thread Tools | |
|
|
Threads Similar to: Help Asap
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| NEED SUM HELP ASAP | sn94 | 5.0 Mustangs | 19 | September 28th, 2007 12:34 AM |
| I need help with my fan ASAP..... | 92stang0802 | 2.3 Mustangs | 20 | September 4th, 2007 12:42 PM |
| help asap please | WeCircleTheProblem | V6 Mustangs | 14 | August 16th, 2007 06:21 PM |
| NEED HELP ASAP!! | 92stang0802 | 2.3 Mustangs | 53 | July 5th, 2007 12:03 PM |
| NEED HELP ASAP!! | VetteC5RFrEak | 5.0 Mustangs | 0 | August 3rd, 2006 02:01 AM |
