List of Planned Mods...Suggestions?

NinetySixVert · April 25th, 2008, 11:08 AM

So I have a fair share of money to put into my car and here's what I'm pretty sure I want to go with as far as performance mods. I was just looking for any tips, advice, or suggestions from some of you veterans out there haha. Thanks in advance.

- PI heads and intake; cams
- BBK CAI
- BBK 75mm throttle body
- BBK shorty headers
- Flowmaster 40's
- BBK o/r h-pipe
- 3.73 gears (and speedcal)
- King Cobra clutch

What do you guys figure the horsepower gains would be from mods like that? I know that usually annoying when people ask, but if anyone does have similar mods just let me know how much gain you have. Thanks again!

ZoomZoomMFer · April 25th, 2008, 11:22 AM

ok with the cai go wit the JLT..

with the TB go with acufab..

you will probably be around 280-300 in horsepower gains in the end

Muscletang · April 25th, 2008, 11:36 AM

Definitely go with the JLT intake and Accufab if you can afford it. Shorty headers won't get you much anything but you might as well do them when you have the heads off. Everything else looks good except a lot of people don't like the King Cobra clutch but I have never used one. I expect you to be around 260 rwhp. Not a bad gain over the npi stuff.

nes · April 25th, 2008, 11:39 AM

Originally Posted by NinetySixVert

So I have a fair share of money to put into my car and here's what I'm pretty sure I want to go with as far as performance mods. I was just looking for any tips, advice, or suggestions from some of you veterans out there haha. Thanks in advance.

- PI heads and intake; cams
- BBK CAI
- BBK 75mm throttle body
- BBK shorty headers
- Flowmaster 40's
- BBK o/r h-pipe
- 3.73 gears (and speedcal)
- King Cobra clutch

What do you guys figure the horsepower gains would be from mods like that? I know that usually annoying when people ask, but if anyone does have similar mods just let me know how much gain you have. Thanks again!

throw those in the trash because they wont gain anything. get some Longtubes, and a JLT, look into some aftermarket cams like a stage 1(comp 262s for example) and if you wanna be smart about things, and take some1s advice, get a spec clutch or ram, king cobra is bottom of the barrel, we had a debate about it at one point, and it sucks donkey penis... enjoy your mods

G.T. Rags · April 25th, 2008, 02:44 PM

what nes said, and ad a midpipe

NinetySixVert · April 25th, 2008, 02:58 PM

I was unsure about the clutch too, and was between King Cobra and Spec1 or whatever. Hmm. And I want the VT Stage 1 cams, so got that. And then longtube you say? Alright I'll look into that too. Thanks for the input.

deedub97GT · April 25th, 2008, 03:25 PM

sounds god here is my advice...hurry the fuck up and put em on lol

RandoGT · April 25th, 2008, 04:57 PM

Originally Posted by NinetySixVert

So I have a fair share of money to put into my car and here's what I'm pretty sure I want to go with as far as performance mods. I was just looking for any tips, advice, or suggestions from some of you veterans out there haha. Thanks in advance.

- PI heads and intake; cams
- BBK CAI
- BBK 75mm throttle body
- BBK shorty headers
- Flowmaster 40's
- BBK o/r h-pipe
- 3.73 gears (and speedcal)
- King Cobra clutch

What do you guys figure the horsepower gains would be from mods like that? I know that usually annoying when people ask, but if anyone does have similar mods just let me know how much gain you have. Thanks again!

if you're sticking strictly to those kinds of mods then i'd say scrap BBK and get a JLT, Accufab TB & Plenum, some LTs with matching midpipe, catback, 4.10s, and a Spec clutch.

if you're looking to spend some more then get some aftermarket cams for starters, and nitrous or FI...then take it from there.

April 25th, 2008, 11:08 AM	#1
NinetySixVert Regular 1996 Mustang GT Conv. Join Date: Apr 2008 Location: Illinois Posts: 239 iTrader: 0 reviews	List of Planned Mods...Suggestions? So I have a fair share of money to put into my car and here's what I'm pretty sure I want to go with as far as performance mods. I was just looking for any tips, advice, or suggestions from some of you veterans out there haha. Thanks in advance. - PI heads and intake; cams - BBK CAI - BBK 75mm throttle body - BBK shorty headers - Flowmaster 40's - BBK o/r h-pipe - 3.73 gears (and speedcal) - King Cobra clutch What do you guys figure the horsepower gains would be from mods like that? I know that usually annoying when people ask, but if anyone does have similar mods just let me know how much gain you have. Thanks again!

April 25th, 2008, 11:22 AM	#2
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,205 iTrader: 17 reviews	ok with the cai go wit the JLT.. with the TB go with acufab.. you will probably be around 280-300 in horsepower gains in the end __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

April 25th, 2008, 11:36 AM	#3
Muscletang Hardcore Enthusiast 1997 SVT Cobra Join Date: Sep 2007 Location: Chesapeake, VA Posts: 2,233 iTrader: 1 reviews	Definitely go with the JLT intake and Accufab if you can afford it. Shorty headers won't get you much anything but you might as well do them when you have the heads off. Everything else looks good except a lot of people don't like the King Cobra clutch but I have never used one. I expect you to be around 260 rwhp. Not a bad gain over the npi stuff. __________________

April 25th, 2008, 03:25 PM	#7
deedub97GT MM's Drunken Sailor single turbo in the works as fast as i can push it! Join Date: Feb 2008 Location: virginia beach virginia Posts: 1,822 iTrader: 0 reviews	sounds god here is my advice...hurry the fuck up and put em on lol __________________ MILITARY CREW GSM3

Threads Similar to: List of Planned Mods...Suggestions?
Thread	Thread Starter	Forum	Replies	Last Post
My Mod List! Any suggestions	02stang6	V6 Mustangs	31	February 1st, 2008 05:26 PM
MOD list suggestions for exhaust.	drakkon84	V6 Mustangs	3	November 6th, 2007 06:16 PM
k here's my planned mods list for this daydreaming session	MSO	2.3 Mustangs	29	June 22nd, 2007 07:14 PM
Mods planned out in advance	V6boi	V6 Mustangs	22	February 16th, 2007 09:16 AM
parts suggestions list	laserstang2	96-98	3	February 11th, 2007 12:44 AM

April 25th, 2008, 02:58 PM	#6
NinetySixVert Regular 1996 Mustang GT Conv. Join Date: Apr 2008 Location: Illinois Posts: 239 iTrader: 0 reviews	I was unsure about the clutch too, and was between King Cobra and Spec1 or whatever. Hmm. And I want the VT Stage 1 cams, so got that. And then longtube you say? Alright I'll look into that too. Thanks for the input.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 10:58 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.