oil and water gauges!!

gtdan · May 17th, 2008, 06:43 PM

well i just bought some auto meters and i dont know how to install them , can someone imput me ?

MikeD05GT · May 17th, 2008, 07:57 PM

pm mustangmatt96gt he will tell you all about what u need to do

gtdan · May 18th, 2008, 03:41 PM

do i need to get a new oil sending unit?

MustangMatt96GT · May 18th, 2008, 10:12 PM

no...

just use the extra port on the oil sending unit part now.
see the allen head plug?

And tap a place for the water temp in the aluminum crossover.

gtdan · May 18th, 2008, 11:01 PM

am i going to run tubing for the water temp or some sort of wire?

MustangMatt96GT · May 18th, 2008, 11:02 PM

what model gauges do you have? Link them to me

gtdan · May 18th, 2008, 11:07 PM

sport comp i dont have a link i got them both for 30 $ new !

MustangMatt96GT · May 18th, 2008, 11:08 PM

are they electric senders or mechanical?
pictures of the backs?

gtdan · May 18th, 2008, 11:12 PM

i dont have pics but the water gauge has 3 prongs on it !

MustangMatt96GT · May 18th, 2008, 11:13 PM

txt me pictures of the back of the gauges man.

gtdan · May 18th, 2008, 11:19 PM

Auto Meter - Sport-Comp Series: Water Temperature - 2 1/16" (52.4mm) - Range: 100 - 250 deg. F - Auto Meter 3337 - TruckCustomizers.com

MustangMatt96GT · May 18th, 2008, 11:29 PM

you need a temp gauge sending unit. I have a few spares in the garage. And the oil pressure probably needs a sending unit too if it has 3 prongs.

gtdan · May 18th, 2008, 11:37 PM

no the oil came with tubing a couple compression ftngs, how do the sending units look?

MustangMatt96GT · May 18th, 2008, 11:42 PM

then the oil is a mechanical gauge and u will have to run the tubing to the gauge and the oil pressure setup like in the pitures above.

And the long skinny thing in your pic you just sent me is the temp gauge sending unit. thats what you need to tap into the aluminum part of the crossover to get a good temp gauge reading.

gtdan · May 18th, 2008, 11:45 PM

what size tap and thread will i need and where would be the best place to drill, and what do i connect to it wire?

MustangMatt96GT · May 19th, 2008, 12:04 AM

the wire will got to the back of the gauge. and the tap size is a 1/8-27 NPT. I tapped mine on the passenger side of my aluminum.

MikeD05GT · May 19th, 2008, 08:53 AM

told you he would help.... i repped u brother

MustangMatt96GT · May 19th, 2008, 09:18 AM

thanks man

ujslost · May 20th, 2008, 05:32 PM

Good stuff there matt.
Mechanical gauges are by far the easiest to install. Just put the sending units where matt suggested and you will be fine.

May 17th, 2008, 06:43 PM	#1
gtdan Enthusiast 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 521 iTrader: 0 reviews	oil and water gauges!! well i just bought some auto meters and i dont know how to install them , can someone imput me ? __________________ sold the stang

May 18th, 2008, 03:41 PM	#3
gtdan Enthusiast 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 521 iTrader: 0 reviews	do i need to get a new oil sending unit? __________________ sold the stang

May 18th, 2008, 10:12 PM	#4
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,689 iTrader: 3 reviews	no... just use the extra port on the oil sending unit part now. see the allen head plug? And tap a place for the water temp in the aluminum crossover. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 18th, 2008, 11:01 PM	#5
gtdan Enthusiast 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 521 iTrader: 0 reviews	am i going to run tubing for the water temp or some sort of wire? __________________ sold the stang

May 18th, 2008, 11:02 PM	#6
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,689 iTrader: 3 reviews	what model gauges do you have? Link them to me __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 17th, 2008, 07:57 PM	#2
MikeD05GT MM Fanatic 2005 Mustang GT Join Date: Dec 2007 Location: Cedar Grove NJ Posts: 3,204 iTrader: 0 reviews	pm mustangmatt96gt he will tell you all about what u need to do

May 18th, 2008, 11:07 PM	#7
gtdan Enthusiast 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 521 iTrader: 0 reviews	sport comp i dont have a link i got them both for 30 $ new ! __________________ sold the stang

May 18th, 2008, 11:08 PM	#8
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,689 iTrader: 3 reviews	are they electric senders or mechanical? pictures of the backs? __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 18th, 2008, 11:12 PM	#9
gtdan Enthusiast 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 521 iTrader: 0 reviews	i dont have pics but the water gauge has 3 prongs on it ! __________________ sold the stang

May 18th, 2008, 11:13 PM	#10
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,689 iTrader: 3 reviews	txt me pictures of the back of the gauges man. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 18th, 2008, 11:19 PM	#11
gtdan Enthusiast 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 521 iTrader: 0 reviews	Auto Meter - Sport-Comp Series: Water Temperature - 2 1/16" (52.4mm) - Range: 100 - 250 deg. F - Auto Meter 3337 - TruckCustomizers.com __________________ sold the stang

May 18th, 2008, 11:29 PM	#12
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,689 iTrader: 3 reviews	you need a temp gauge sending unit. I have a few spares in the garage. And the oil pressure probably needs a sending unit too if it has 3 prongs. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 18th, 2008, 11:37 PM	#13
gtdan Enthusiast 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 521 iTrader: 0 reviews	no the oil came with tubing a couple compression ftngs, how do the sending units look? __________________ sold the stang

May 18th, 2008, 11:42 PM	#14
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,689 iTrader: 3 reviews	then the oil is a mechanical gauge and u will have to run the tubing to the gauge and the oil pressure setup like in the pitures above. And the long skinny thing in your pic you just sent me is the temp gauge sending unit. thats what you need to tap into the aluminum part of the crossover to get a good temp gauge reading. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 18th, 2008, 11:45 PM	#15
gtdan Enthusiast 1996 mustang gt Join Date: Jul 2006 Location: Denver co Posts: 521 iTrader: 0 reviews	what size tap and thread will i need and where would be the best place to drill, and what do i connect to it wire? __________________ sold the stang

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: oil and water gauges!!
Thread	Thread Starter	Forum	Replies	Last Post
oil pressure and water temp gauge install question	hardhitter	99-04	34	April 13th, 2008 05:44 PM
Aftermarket Oil/Water Gauge Install	GTPONY1	2005 - 2010	4	January 19th, 2008 03:33 PM
Oil/Water Separator?	2006greyGT	2005 - 2010	11	January 9th, 2008 07:04 PM
Water Temp & Oil Pressure	gotboost562	5.0 Mustangs	1	September 4th, 2007 10:50 PM
oil and water sensors	rondaw3g0410	Audio/Video	2	August 26th, 2006 04:27 PM

May 19th, 2008, 12:04 AM	#16
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,689 iTrader: 3 reviews	the wire will got to the back of the gauge. and the tap size is a 1/8-27 NPT. I tapped mine on the passenger side of my aluminum. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 19th, 2008, 08:53 AM	#17
MikeD05GT MM Fanatic 2005 Mustang GT Join Date: Dec 2007 Location: Cedar Grove NJ Posts: 3,204 iTrader: 0 reviews	told you he would help.... i repped u brother

May 19th, 2008, 09:18 AM	#18
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,689 iTrader: 3 reviews	thanks man __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 20th, 2008, 05:32 PM	#19
ujslost MM Fanatic Join Date: Mar 2007 Location: Albertville, AL Posts: 3,920 Blog Entries: 1 iTrader: 1 reviews	Good stuff there matt. Mechanical gauges are by far the easiest to install. Just put the sending units where matt suggested and you will be fine. __________________ 1986 Mustang GT t-top time piece!

All times are GMT -4. The time now is 01:02 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.