pi swap questions

zigbigadoru · June 25th, 2008, 10:14 PM

ok so if i were to swap out the heads, intake and cams would i need tog et headers, midpipe and catback for a 99-04 since the heads are where the heads bolt up to?

98Muscletang · June 25th, 2008, 10:21 PM

Nope. I used my stock 98 manifolds. It wouldn't hurt though that's for sure.

NMR-2vGT · June 25th, 2008, 11:46 PM

+1 on the above. Your stock manifolds will bolt right up to the PI heads. Itd definetely be better to get the longtubes now and drop them in already on the heads and make it much easier to install them but if you are like me and didnt have the money then your stock manifolds will be fine

zigbigadoru · June 26th, 2008, 07:47 AM

well i plan on buying all the stuff over the next couple of months and then plan on doing a giant swap over the winter.

Uncle Humjaba · June 26th, 2008, 09:38 PM

I went with my 96 manifolds and they bolted up just fine.

97S281 · July 11th, 2008, 10:28 PM

It is alot easier to install the headers from the top though, if your doing the swap in the future i'd save up and do the headers at the same time.

June 25th, 2008, 10:14 PM	#1
zigbigadoru Regular 1997 Mustang GT Join Date: Feb 2008 Location: Rochester hills, MI Posts: 151	pi swap questions ok so if i were to swap out the heads, intake and cams would i need tog et headers, midpipe and catback for a 99-04 since the heads are where the heads bolt up to?

June 25th, 2008, 10:21 PM	#2
98Muscletang Hardcore Enthusiast 1998 Mustang GT Join Date: Sep 2007 Location: VA Beach, VA Posts: 1,053	Nope. I used my stock 98 manifolds. It wouldn't hurt though that's for sure. __________________ 1998 GT, Full PI Swap, 4.10's, Tuned by Trick Tuners

June 25th, 2008, 11:46 PM	#3
NMR-2vGT Hardcore Enthusiast Join Date: Feb 2007 Location: Grand Island, Ne Posts: 1,499	+1 on the above. Your stock manifolds will bolt right up to the PI heads. Itd definetely be better to get the longtubes now and drop them in already on the heads and make it much easier to install them but if you are like me and didnt have the money then your stock manifolds will be fine __________________ 1996 Mustang GT, Full PI Swap, MGW Shifter, Magnaflow Cat-back, K&N Filter Former name: Lethal2v

June 26th, 2008, 09:38 PM	#5
Uncle Humjaba Enthusiast 1996 Mustang GT Premium 15.2@91 Join Date: Aug 2007 Location: Tracy, CA Posts: 527	I went with my 96 manifolds and they bolted up just fine. __________________ "He is no fool who gives up what he cannot keep to gain what he cannot lose."

July 11th, 2008, 10:28 PM	#6
97S281 Regular 1997 Saleen S281 Join Date: Feb 2007 Location: ZEBULON N.C. Posts: 321	It is alot easier to install the headers from the top though, if your doing the swap in the future i'd save up and do the headers at the same time. __________________ hmmmmmmmmmmmmmm.....

June 26th, 2008, 07:47 AM	#4
zigbigadoru Regular 1997 Mustang GT Join Date: Feb 2008 Location: Rochester hills, MI Posts: 151	well i plan on buying all the stuff over the next couple of months and then plan on doing a giant swap over the winter.

Threads Similar to: pi swap questions
Thread	Thread Starter	Forum	Replies	Last Post
T-5 swap questions..	fastford3388	5.0 Mustangs	2	May 28th, 2008 09:39 AM
Can't decide, engine swap or PI swap? A few questions...	k3vin	96-98	24	September 5th, 2007 06:48 PM
pi swap questions	LaserRed96GT	Modular Mustangs	0	January 10th, 2007 11:51 PM
t-5 to c-6 swap questions	83five0	5.0 Mustangs	5	December 11th, 2006 06:24 PM
Questions On A 2.3 To 5.0 Swap!	tatterd87	2.3 Mustangs	1	September 25th, 2006 02:34 PM

All times are GMT -4. The time now is 06:25 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.