Is It True?

November 13th, 2006, 03:40 PM	#1
rudedude101 Newbie Join Date: Oct 2006 Posts: 39	Is It True? is it true that 96 - 98 mustang gt's are the worst?

November 13th, 2006, 03:55 PM	#2
88mstang Regular Join Date: Nov 2006 Location: Stafford,VA Posts: 88	what do u mean the worst. as in slowest it is the 94-95

November 13th, 2006, 06:36 PM	#3
sonicblue Hardcore Enthusiast 1990 GT Join Date: Aug 2006 Location: dalzell, south carolina Posts: 1,435	there the slowest of the 4.6s but you can upgrade and make them have the same power of 99-04 relatively cheap __________________ 1990 5.0 getting all fixed up for next season 2004 mustang gt 520rwhp, 491 trq sold

November 14th, 2006, 12:47 AM	#4
purplepony96 Newbie Join Date: Nov 2006 Posts: 11	how much would pi heads and intake cost me

November 14th, 2006, 01:13 AM	#5
tlgrant Regular Join Date: Aug 2006 Posts: 318	scavange around on ebay i got the cams and the manifold for 200.. pretty cheap HP in my book. from what i know the heads are least of the three as far as adding power. the intake and cams are pretty economical

November 14th, 2006, 01:17 AM	#6
sonicblue Hardcore Enthusiast 1990 GT Join Date: Aug 2006 Location: dalzell, south carolina Posts: 1,435	i just did a quick search on ebay and u should be able to get the intake for under 200 and heads with cams maybe 500 or so. maybe less if you look around for a while. theres always a ton of them on ebay so just keep an eye out. __________________ 1990 5.0 getting all fixed up for next season 2004 mustang gt 520rwhp, 491 trq sold

November 14th, 2006, 11:29 PM	#7
purplepony96 Newbie Join Date: Nov 2006 Posts: 11	now what all will i need for the swap just the heads and intake and a gasket set

November 15th, 2006, 09:56 AM	#8
98stanger Regular 1998 mustang gt convert Join Date: Oct 2006 Location: virginia beach virginia Posts: 129	not trying to bust a bubble but why would u wanna buy used heads and cams and all. if it was me i would buy all new stuff. well atleast the heads

November 15th, 2006, 10:22 AM

ChrisJ

MuchCoolerThanGTsetGO

2002 Mustang GT

SLOW

Join Date: Jun 2006

Location: Shepherdsville, Kentucky

Posts: 16,248

Originally Posted by 98stanger

not trying to bust a bubble but why would u wanna buy used heads and cams and all. if it was me i would buy all new stuff. well atleast the heads

Well when you can get them for about half what they cost new and have them worked by a shop then it is well worth it...I mean I sold mine and they only had 40K on them...Well I sorta sold the whole motor but that is a different story...

Its just like why would you buy a used motor? To save money...

Alot of people are swapping the stock PI heads off their car for VT heads and such...Or people that are parting out a car after a total or something like that...

There are lots of reasons...

__________________
My Junk

www.myspace.com/cjobe

November 15th, 2006, 11:14 AM

#10

orangeRcode

Hardcore Enthusiast

11.59@119 -100 shot

Join Date: May 2006

Location: Mustang/Yukon, OK

Posts: 1,799

Originally Posted by ChrisJ

...I mean I sold mine and they only had 40K on them...Well I sorta sold the whole motor but that is a different story...

Do tell Chris.

Just kidding, I know the story. Just busting your balls.

__________________
http://www.moddedmustangs.com/forums/image-apic687.jpg

November 16th, 2006, 07:15 AM

#11