[97GT4.6]

Supposedly 20 Horses outta this bitch, but its 250 dollars.

[97S281]

not worth it, and you'll never see 20 hp bump from that piece.

but you might see it from this one: eBay Motors: ACCUFAB F7546K1 75MM 96-04 MUSTANG T BODY & PLENUM KIT (item 370078254130 end time Aug-26-08 18:00:53

[HMUSN]

Accufab ftw

[97GT4.6]

But 450 bucks for a freakin' plenum, thats a helluva lot of money for 11hp

[HBK_2007]

i wonder how the new bbk piece is gonna turn out. its a tb and plenum in one piece

[GTsetGO]

no way you will see 20HP. i know i didn't. lol

[68 dlxcoupe]

I highly reccomend Accufab, the ran a ported upper accufab and a 75MM TB and it was AWESOME. I only saw a 14HP increase but, all I cared about was the throttle response. You wont regret getting accufab

[97GT4.6]

Is there any way you can get them any cheaper? like 300 bucks? because its just so much money to spend.

[97gt]

apparently accufab is one of those products we all can say "you get what you pay for"

[96GTRagTop]

Originally Posted by 97GT4.6 Is there any way you can get them any cheaper? like 300 bucks? because its just so much money to spend.

used/ebay/craigslist/car festivals trades

Originally Posted by 97gt apparently accufab is one of those products we all can say "you get what you pay for"

yup

i believe there was somone who had a peaked PI GT and was making just above 300rwhp....... he switched from some gay ass mitch matched combo to the accufab and picked up 13rwhp or something like that.

[Military98stang]

either way 250 for lets say 10 hp is not a bad $ to hp ratio. Its a quick easy bolt on. you prob wouldnt see that big of a difference in the two unless your motor is modded heavily, heads , cams, intake, if you dont have a heavily modded motor you prob couldnt tell the difference at all. IMO

[96GTRagTop]

Originally Posted by Military98stang either way 250 for lets say 10 hp is not a bad $ to hp ratio. Its a quick easy bolt on. you prob wouldnt see that big of a difference in the two unless your motor is modded heavily, heads , cams, intake, if you dont have a heavily modded motor you prob couldnt tell the difference at all. IMO

on a stock motor u'll feel a dif with the plenum/tb combo and JLT intake. for about 650 bux ur gaining a definate 15-20rwhp.

[Military98stang]

i didnt mean to put across that you wouldnt feel a diference with the combo. I was saying you wouldnt feel that much of a dif between that combo or the accfab. With an almost stock motor you would feel a dif with them but not to much between them.

[blackbirdl98]

UPR makes one that will blow the ACCUFAB one away. They say If included with a UPR 4.6 Cold air intake system upwards of 25+ HP can be expected.
The best part,it cost $90 dollers !!!

Unlimited Performance Racing Products On-Line - Hi-Flow GMS 4.6 Upper Plenum - Cast Finish 96-01 Mustang

[Military98stang]

unless i see dyno results i dont trust what any company says they all say 20 hp and what not

[97GT4.6]

Looks like a legitimate plenum. and for 90 bucks someone will have to get it and try it out.. maybe ill get one..

[96GTRagTop]

Originally Posted by Military98stang unless i see dyno results i dont trust what any company says they all say 20 hp and what not

+1

[97gt]

Originally Posted by 97GT4.6 Looks like a legitimate plenum. and for 90 bucks someone will have to get it and try it out.. maybe ill get one..

you should get one lol then tell me if its legitament

[4POINT6]

Look on ebay you can find slightly used stuff for half that price thats just as nice
I got my New PP 75mm T-body for $100 and my Used MAc 75mm Plenum for $66

[AzSonicSnake]

normally won't see power gains like that unless you have the car returned to know what to do with the increase in air flow..