ouch...........

SWEET2KSTANG · May 3rd, 2009, 01:31 PM

took time to pull motor this morning and this is what i found

buddyantunez1 · May 3rd, 2009, 01:33 PM

you found a motor in there?!?!?!

SWEET2KSTANG · May 3rd, 2009, 01:34 PM

now for the carnage.......

took head off to find this:

G.T. Rags · May 3rd, 2009, 01:38 PM

so to put it simply, ur fucked

Quick99 · May 3rd, 2009, 01:43 PM

What do you think failed first the rod or the piston?

svtkidd23 · May 3rd, 2009, 01:45 PM

we will never know

97S281 · May 3rd, 2009, 01:46 PM

Damn dude, That sucks!!!

I guess it's time for a forged shortblock huh?

SWEET2KSTANG · May 3rd, 2009, 01:53 PM

i am guessing the piston broke first. i think it started to come apart, broke a couple small pieces, there are knicks in the head above the valve from some contact, then all hell broke loose. i have everything but a couple misc pieces to build the motor, but didnt count on maybe a new block and heads. i splurged a little on a few extra things and now i might have to return them or sell them

.

G.T. Rags · May 3rd, 2009, 01:54 PM

is the mustang a dd?

SWEET2KSTANG · May 3rd, 2009, 01:54 PM

was. it had 96 or 97k very abusive miles. i dont think i could stress enough on how abusive those miles were.

97S281 · May 3rd, 2009, 02:01 PM

Check craigslist for a block. You can usually get one for pretty cheap if you just want another stock shortblock.

gray8188 · May 3rd, 2009, 02:02 PM

Damn dude that sucks.. Good to hear your building it better and stronger..

SWEET2KSTANG · May 3rd, 2009, 02:04 PM

i know of a couple blocks that are readily available. i only missing a few gaskets, head fasteners, and main bearings pretty much before i can have another motor assembled.

lemon · May 3rd, 2009, 02:05 PM

That looks like smoke stack number cinq..

*tear*

The accelerator one.

nuStang · May 3rd, 2009, 02:06 PM

Did the part fail from age, or not enough oil in there? lol... I did the same thing to my mower once... But it was 1 cyl, so I knew what happened and when...

weems · May 3rd, 2009, 02:06 PM

LOL! Holy shit man, I got your text but now I can really see how bad it was.

gray8188 · May 3rd, 2009, 02:06 PM

Yea u can probably find a teksid block pretty cheap..

SWEET2KSTANG · May 3rd, 2009, 02:07 PM

Originally Posted by nustang8891

Did the part fail from age, or not enough oil in there? lol... I did the same thing to my mower once... But it was 1 cyl, so I knew what happened and when...

it failed because my dumb ass shoved too much timing in the nitrous tune.

Originally Posted by weems

LOL! Holy shit man, I got your text but now I can really see how bad it was.

yeah, i didnt think the phone pics showed how bad the damage really is.

njstang · May 3rd, 2009, 02:07 PM

damn man sorry to hear it was worse than expected. atleast its a good time to build it stronger

njstang · May 3rd, 2009, 02:08 PM

weems your sig is

May 3rd, 2009, 01:31 PM	#1
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	ouch........... took time to pull motor this morning and this is what i found __________________ project warhorse under construction being built by MP2 Performance

May 3rd, 2009, 01:33 PM	#2
buddyantunez1 November 08 ROTM 2000 3.8L Mustang 195.9/220.8 hp/tq N/A Join Date: Sep 2008 Location: Cleveland MS/Stafford VA Posts: 1,370 iTrader: 0 reviews	you found a motor in there?!?!?! __________________ ~Nitrous is like a Hot Girl with STD's, you know you wanna hit it, but your afraid of the consequences~

May 3rd, 2009, 01:34 PM	#3
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	now for the carnage....... took head off to find this: __________________ project warhorse under construction being built by MP2 Performance

May 3rd, 2009, 01:46 PM	#7
97S281 Rollin' 18/ pushin' 2 1997 Saleen S281 Join Date: Feb 2007 Location: Zebulon N.C. Posts: 6,251 iTrader: 13 reviews	Damn dude, That sucks!!! I guess it's time for a forged shortblock huh? __________________ MODS IN GARAGE NCMM ORIGINAL BLOWN 96-98 CREW MEMBER # 1

May 3rd, 2009, 01:53 PM	#8
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	i am guessing the piston broke first. i think it started to come apart, broke a couple small pieces, there are knicks in the head above the valve from some contact, then all hell broke loose. i have everything but a couple misc pieces to build the motor, but didnt count on maybe a new block and heads. i splurged a little on a few extra things and now i might have to return them or sell them . __________________ project warhorse under construction being built by MP2 Performance

May 3rd, 2009, 01:43 PM	#5
Quick99 Regular 1999 Mustang GT ? Join Date: May 2008 Location: Fullerton CA Posts: 343 iTrader: 0 reviews	What do you think failed first the rod or the piston?

May 3rd, 2009, 01:54 PM	#10
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	was. it had 96 or 97k very abusive miles. i dont think i could stress enough on how abusive those miles were. __________________ project warhorse under construction being built by MP2 Performance

May 3rd, 2009, 02:01 PM	#11
97S281 Rollin' 18/ pushin' 2 1997 Saleen S281 Join Date: Feb 2007 Location: Zebulon N.C. Posts: 6,251 iTrader: 13 reviews	Check craigslist for a block. You can usually get one for pretty cheap if you just want another stock shortblock. __________________ MODS IN GARAGE NCMM ORIGINAL BLOWN 96-98 CREW MEMBER # 1

May 3rd, 2009, 02:02 PM	#12
gray8188 MM Fanatic 2003 mustang gt yr 1965 @ 88mph Join Date: May 2008 Location: Tampa, FL Posts: 3,368 iTrader: 5 reviews	Damn dude that sucks.. Good to hear your building it better and stronger.. __________________ i'm pretty sure that when i move into my own place i'm gonna mount an anti aircraft gun on my roof with somebody manning it 24 hours a day. why? because it would be fucking AWESOME.[/quote]

May 3rd, 2009, 02:04 PM	#13
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	i know of a couple blocks that are readily available. i only missing a few gaskets, head fasteners, and main bearings pretty much before i can have another motor assembled. __________________ project warhorse under construction being built by MP2 Performance

May 3rd, 2009, 02:05 PM	#14
lemon Enthusiast 1999 GT Rag never@ran Join Date: Aug 2005 Location: Charleston, SC Posts: 697 iTrader: 0 reviews	That looks like smoke stack number cinq.. tear The accelerator one.

May 3rd, 2009, 02:06 PM	#15
nuStang Hardcore Enthusiast 2000 Convertible V6 Join Date: May 2008 Location: Murfreesboro, TN Posts: 1,030 iTrader: 1 reviews	Did the part fail from age, or not enough oil in there? lol... I did the same thing to my mower once... But it was 1 cyl, so I knew what happened and when...

May 3rd, 2009, 02:06 PM	#16
weems Tech Exchange Head Honcho 2003 SVT Cobra 11.70 @ 121 Join Date: Aug 2006 Location: Forsyth/Statesboro, GA Posts: 9,044 iTrader: 3 reviews	LOL! Holy shit man, I got your text but now I can really see how bad it was.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/99-04/121899-ouch.html
Posted By	For	Type	Date
StreetFire.net - My 2001 Trans-Am WS6 - Lamb05Murcie - NEW PICS!	This thread	Refback	May 9th, 2009 06:34 PM
StreetFire.net - My 2001 Trans-Am WS6 - Lamb05Murcie - NEW PICS!	This thread	Refback	May 9th, 2009 03:43 PM

Threads Similar to: ouch...........
Thread	Thread Starter	Forum	Replies	Last Post
ouch	707Stang	The Clubhouse	11	May 4th, 2009 04:16 AM
ouch :(	TheLookerTheWatcher	The Clubhouse	43	May 31st, 2008 05:30 AM
Ouch!	Cowboyblue31	99-04	11	May 6th, 2008 07:27 AM
ouch	thetrooper31	The Clubhouse	6	February 25th, 2008 06:57 PM
Ouch!!	Stangzilla	Videos	10	February 8th, 2007 01:26 PM

All times are GMT -4. The time now is 11:10 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.