A/C Delete kit?

Dolbs4082 · May 17th, 2009, 04:06 AM

Anyone know where to buy one of these at?

Because last night i was out workin on the clutch and all of that, started her up, let her idle for about 2-3 minutes watching the gauges, hooked the comp up to her and checked for codes (none at all

).

So i shut the car off, got out and was lookin under the hood with my buddy when all of a sudden PSSSSSSSHHHHHHHHHHHHHHHHHHHHHHHHHHHHH!! Steam was spraying everywhere, i was like O SOB!! it hissed for about 2 minutes, so we opened both ends of the shop up to let the fumes out because they were burning the shit outa my eyes and my throat.

Crawled up under there after the fumes were gone and there was a yellowish slime covering the motor mount and the a.c lines. Sooo im assuming that it was an ac line that burst releasing the free on and all that b.s. so rather then replacing the tubing and all that im just going to remove the ac in my car. dont need it anyways haha.

question is, do i need to buy the extra pully or can i buy a smaller belt? what all do i remove when installing the a.c delete kit? do i pull that front radiator thing, the condensor, the a.c lines and all that b.s. or what?

ajm · May 17th, 2009, 04:08 AM

Check uprproducts.com, lethalperformance.com, and deaugostino racing (i know i spelled it wrong so youll have to google).

UPR = a bunch of shit heads but if thats the only place you can find it oh well.

mrsinister2424 · May 17th, 2009, 04:39 AM

Lol @ ajm, brandishing his own brand of mustang justice

ajm · May 17th, 2009, 04:42 AM

Damn right, when those faggots call me wasting my time trying to force me to buy something, when im in the middle of turning a wrench on flat rate because I simply added something to "my cart" and put in my info to see how much shipping is im never gonna spend so much as a penny with them. ass wipes!! My little upr experience

C0BRAK1LL3R · May 17th, 2009, 01:31 PM

My longtubes burnt one of my ac lines, I parked and all a sudden it was like pshhhhhh. Just replaced it and tied it up out the way.

Dolbs4082 · May 17th, 2009, 02:21 PM

yea... thats kinda what im thinkin happen with mine. headers melted a whole in the line, so i think i'll just unhook it haha

moneygreenstang · May 17th, 2009, 07:11 PM

you remove the compressor and replace it with a free spinning pulley mine was 40$ at autozone your compressor didnt freeze up so I dont think you need it just block off and tie up the a/c lines if you dont need the a/c

Novanutcase · July 6th, 2009, 08:36 PM

I got one for sale I took off my '03 GT. I'll sell it to you CHEAP!! LOL!

Had it on the car for about 4 months.......

John

May 17th, 2009, 04:06 AM	#1
Dolbs4082 Hardcore Enthusiast 2001 mustang steeda gt 13.4 Join Date: Dec 2008 Location: kansas Posts: 1,189	A/C Delete kit? Anyone know where to buy one of these at? Because last night i was out workin on the clutch and all of that, started her up, let her idle for about 2-3 minutes watching the gauges, hooked the comp up to her and checked for codes (none at all ). So i shut the car off, got out and was lookin under the hood with my buddy when all of a sudden PSSSSSSSHHHHHHHHHHHHHHHHHHHHHHHHHHHHH!! Steam was spraying everywhere, i was like O SOB!! it hissed for about 2 minutes, so we opened both ends of the shop up to let the fumes out because they were burning the shit outa my eyes and my throat. Crawled up under there after the fumes were gone and there was a yellowish slime covering the motor mount and the a.c lines. Sooo im assuming that it was an ac line that burst releasing the free on and all that b.s. so rather then replacing the tubing and all that im just going to remove the ac in my car. dont need it anyways haha. question is, do i need to buy the extra pully or can i buy a smaller belt? what all do i remove when installing the a.c delete kit? do i pull that front radiator thing, the condensor, the a.c lines and all that b.s. or what?

May 17th, 2009, 04:08 AM	#2
ajm MM Fanatic Join Date: May 2008 Posts: 4,385	Check uprproducts.com, lethalperformance.com, and deaugostino racing (i know i spelled it wrong so youll have to google). UPR = a bunch of shit heads but if thats the only place you can find it oh well. __________________ car info is in my garage You wouldnt pay someone to f**k your wife and then brag about how good the guy was so why have someone work on your car and then brag about how fast it is or all the new parts you just got installed.

May 17th, 2009, 04:42 AM	#4
ajm MM Fanatic Join Date: May 2008 Posts: 4,385	Damn right, when those faggots call me wasting my time trying to force me to buy something, when im in the middle of turning a wrench on flat rate because I simply added something to "my cart" and put in my info to see how much shipping is im never gonna spend so much as a penny with them. ass wipes!! My little upr experience __________________ car info is in my garage You wouldnt pay someone to f*k your wife and then brag about how good the guy was so why have someone work on your car and then brag about how fast it is or all the new parts you just got installed. Last edited by ajm : May 17th, 2009 at 04:44 AM.*

May 17th, 2009, 01:31 PM	#5
C0BRAK1LL3R Regular Join Date: Feb 2009 Posts: 262	My longtubes burnt one of my ac lines, I parked and all a sudden it was like pshhhhhh. Just replaced it and tied it up out the way. __________________ 2000 GT JLT Shortram, Mac long tubes, Mac o/r H pipe, UPR k member kit, UPR Billet cc plates, Spec stage 2, steeda clutch quad. 1/8th mile-9.035, 1.980 60ft just flows. New time- 8.92, 2.28 60ft. Mods.

May 17th, 2009, 07:11 PM	#7
moneygreenstang Regular 2001 Mustang GT Join Date: Jun 2008 Location: Florida Posts: 205	you remove the compressor and replace it with a free spinning pulley mine was 40$ at autozone your compressor didnt freeze up so I dont think you need it just block off and tie up the a/c lines if you dont need the a/c __________________ 01 GT Vert - Triple Black - Mods in Garage

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

May 17th, 2009, 02:21 PM	#6
Dolbs4082 Hardcore Enthusiast 2001 mustang steeda gt 13.4 Join Date: Dec 2008 Location: kansas Posts: 1,189	yea... thats kinda what im thinkin happen with mine. headers melted a whole in the line, so i think i'll just unhook it haha

July 6th, 2009, 08:36 PM	#8
Novanutcase Enthusiast 2003 GT Join Date: Oct 2007 Location: Los Angeles, California Posts: 621	I got one for sale I took off my '03 GT. I'll sell it to you CHEAP!! LOL! Had it on the car for about 4 months....... John __________________ '03 GT, Max Moto Max Grip Box, Wilwood SL 6 front/DL4 rear Big Brake Kit, Corbeau Seats, MGW Short Shifter, MAC Long Tube Headers/Prochamber mid/ Flowmaster 40, FRPP 4.10, TrickFlow Diff Cover/75mm TB/Plenum, Eaton Posi, Moser 31 spline Axles, UDP

Threads Similar to: A/C Delete kit?
Thread	Thread Starter	Forum	Replies	Last Post
FRPP a/c delete kit	mustangsoldier	5.0 Mustangs	17	April 26th, 2009 11:32 PM
grill delete without kit???	Tmac3320	99-04	6	May 9th, 2008 12:58 AM
a/c delete kit	GTnightrider	96-98	3	February 4th, 2008 02:56 PM
PCV Delete Kit	Murderjetz	V6 Mustangs	14	June 17th, 2007 01:44 AM
grille delete kit	Kennhyy3	V6 Mustangs	8	January 18th, 2007 06:32 PM

All times are GMT -4. The time now is 03:35 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.