Tubular K members.

mounder27 · June 30th, 2009, 06:18 PM

i have tokicos too but i should have went with strange's stuff but oh well they seem to work anyways, i always run my shocks soft and that must be why your car isn't bouncing then, i'll have to try that when i go to the track....

olskool · June 30th, 2009, 07:09 PM

The QA1 came with bolt on spring perches for the stock arms if you buy one used make sure it has them or your screwed

As far as quality its some freaking tubes welded together as long as the right material was used and the welds are good whats the diff.

All the trash talk on the QA1 i find funny cause like i said its on our road race car and perfomed beautifuly but hey what do we know we race it not drive it to sonic and brag about it or whatever

If it held up at Mid America Shelby Meet with hoosier slicks in 110 degree temps for 4 days im pretty sure your street car wont have a problem with it.

As a matter of fact were taking it out of the track car and putting it in the 03 cobra and going with agent 47 SLA kit in the track car. Not cause we dont like the QA1 but becuase two control arms provide much better alignment angles while corning we like the QA1 so much were putting it in the dialy driven cobra so for whats it worth i say go for it.

We even looked into it for the drag car but they dont make one with 429 mounts other wise it would be in that to.

mustangmanic · July 1st, 2009, 01:08 PM

I'm most def gonna get the chrommoly racecraft.
I'll pair it with the racecraft a arms, and some MM coil overs.
Thanks Trevor for the help!

Trevor04GT · July 1st, 2009, 03:34 PM

Originally Posted by mustangmanic

I'm most def gonna get the chrommoly racecraft.
I'll pair it with the racecraft a arms, and some MM coil overs.
Thanks Trevor for the help!

Yeah man, glad to hear. They are top notch. Plus their customer service is awesome. They are great guys who make great products. I am VERY confident putting anything they sell/recommend on my car.

2kGT · July 2nd, 2009, 09:53 AM

Originally Posted by mustangmanic

I'm most def gonna get the chrommoly racecraft.
I'll pair it with the racecraft a arms, and some MM coil overs.
Thanks Trevor for the help!

Dam ballers.....what do yall do for a living? LOL

jivepepper · July 2nd, 2009, 11:18 AM

I've been using the UPR kit for well over a year now. I live in a rural area with lots of bumps and curves. I drive aggressively and it's still holding up well. You'd be hard pressed to find a lighter kit.

June 30th, 2009, 06:18 PM	#21
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	i have tokicos too but i should have went with strange's stuff but oh well they seem to work anyways, i always run my shocks soft and that must be why your car isn't bouncing then, i'll have to try that when i go to the track.... __________________ www.wmdracing.net

June 30th, 2009, 07:09 PM	#22
olskool Newbie Comming soon VERY soon Join Date: Jun 2009 Location: Tulsa Oklahoma Posts: 34 iTrader: 0 reviews	The QA1 came with bolt on spring perches for the stock arms if you buy one used make sure it has them or your screwed As far as quality its some freaking tubes welded together as long as the right material was used and the welds are good whats the diff. All the trash talk on the QA1 i find funny cause like i said its on our road race car and perfomed beautifuly but hey what do we know we race it not drive it to sonic and brag about it or whatever If it held up at Mid America Shelby Meet with hoosier slicks in 110 degree temps for 4 days im pretty sure your street car wont have a problem with it. As a matter of fact were taking it out of the track car and putting it in the 03 cobra and going with agent 47 SLA kit in the track car. Not cause we dont like the QA1 but becuase two control arms provide much better alignment angles while corning we like the QA1 so much were putting it in the dialy driven cobra so for whats it worth i say go for it. We even looked into it for the drag car but they dont make one with 429 mounts other wise it would be in that to. __________________ " i dont worry about history there is no future in it" Bill the leadslinger hines Ecoteroism Rocks

July 1st, 2009, 01:08 PM	#23
mustangmanic MM Fanatic 2002 Mustang GT 13.334 @ 106.27 w/2.01 60' Join Date: May 2007 Location: Indianapolis Posts: 3,108 iTrader: 2 reviews	I'm most def gonna get the chrommoly racecraft. I'll pair it with the racecraft a arms, and some MM coil overs. Thanks Trevor for the help! __________________

July 2nd, 2009, 11:18 AM	#26
jivepepper MM Fanatic Join Date: Mar 2006 Location: Under a sombrero Posts: 4,556 iTrader: 1 reviews	I've been using the UPR kit for well over a year now. I live in a rural area with lots of bumps and curves. I drive aggressively and it's still holding up well. You'd be hard pressed to find a lighter kit. __________________ 2000 GT 665/540rwhp/rwtq On pump gas Best 1/4 638hp street tune 11.01, best trap 134MPH, 80*+day, 10.5" DD Cobra R's & 315/35/17 DR'S DYNO VID ---> http://www.youtube.com/watch?v=K9uOS732mdA

Threads Similar to: Tubular K members.
Thread	Thread Starter	Forum	Replies	Last Post
Tubular K Member	scxc15	99-04	15	June 8th, 2009 07:16 PM
All Members Please Read...especially Florida Members!!	87FloridaGT	The Clubhouse	13	May 20th, 2009 10:08 PM
tubular k members	zigbigadoru	96-98	28	February 17th, 2009 10:59 AM
Tubular A Arms	MustangMatt96GT	96-98	1	May 22nd, 2008 09:00 PM
Tubular K Members	90ProjectStang	5.0 Mustangs	2	August 24th, 2006 07:10 PM

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 03:56 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.