Cams

bandity2k00 · July 14th, 2009, 11:31 PM

Comp Cams Stage II Xtreme Energy XE270AH Camshafts (96-04 4.6L 2V) at AmericanMuscle.com - Free Shipping!

How much HP you guys think that would GAIN me with the mods i have

GTRACER88 · July 14th, 2009, 11:42 PM

20-35 rwhp.

Scott2001GT · July 15th, 2009, 12:51 AM

depends on milage...should be around 300rwhp mark

SilverStang03 · July 15th, 2009, 12:53 AM

prob 15 to 20. you need lt headers to give those cams full potential.

Scott2001GT · July 15th, 2009, 12:56 AM

well idk about headers....idk to ME 2v and LTs don't do alot like to respond that the 3v and 4v get. They will help though fo sho

SilverStang03 · July 15th, 2009, 01:05 AM

Originally Posted by Scott2001GT

well idk about headers....idk to ME 2v and LTs don't do alot like to respond that the 3v and 4v get. They will help though fo sho

youre absolutely correct about lts. dont get alot from them. if you are trying to make power n/a you really need them tho.

Scott2001GT · July 15th, 2009, 01:08 AM

yes sir....i would say subframes and alm driveshaft would be better than LTs in overall

AggieStang · July 15th, 2009, 01:34 AM

I have those cams and bbk shorties and I really didn't gain anything... I'm hoping it was just a super conservative tune though.

SilverStang03 · July 15th, 2009, 01:39 AM

Originally Posted by Scott2001GT

yes sir....i would say subframes and alm driveshaft would be better than LTs in overall

idk about that, suspension as a whole is probably more beneficial.....idk about what an aluminum ds will do for you.. never drivin a car with one in it.

Scott2001GT · July 15th, 2009, 01:41 AM

well i hear subframes is a great mod. and rev faster with the alm.

BUT if youplan on doing LTs later on do it now do you don't have to re-tune

SilverStang03 · July 15th, 2009, 01:42 AM

i never really got what subframes did for you.......i guess its better for turns and handling???? all i know is i would do some control arms.

Scott2001GT · July 15th, 2009, 01:47 AM

body roll. have a multi piece body it helps roll and keeps it solid. and after year or hole shots your body twist and bends. keeps it one

SilverStang03 · July 15th, 2009, 01:48 AM

makes sense.....

Scott2001GT · July 15th, 2009, 01:48 AM

cheap too

JasonT1124 · July 15th, 2009, 01:56 AM

I will sell you a set of Comp Cam 262AHs with only 1200 miles on em for $450 plus shipping...

Boostang · July 15th, 2009, 12:06 PM

if im not mistaking dont u have to fly cut your pistons with the comp 270's?
dont quote me on this!?!?

GTRACER88 · July 15th, 2009, 01:48 PM

Sometimes. They are not always a perfect fit.

AggieStang · July 15th, 2009, 02:39 PM

I got mine fly cut

Boostang · July 15th, 2009, 02:41 PM

i thought so..
i favor the cms stage 2's tho but thats because im about to spray so it makes since..

SilverStang03 · July 15th, 2009, 05:39 PM

how much does flycutting run?

July 14th, 2009, 11:31 PM	#1
bandity2k00 Baker Jr. 2002 Mustang GT Coming after build!! Join Date: Mar 2008 Location: Gambrills,MD Posts: 2,874 iTrader: 3 reviews	Cams Comp Cams Stage II Xtreme Energy XE270AH Camshafts (96-04 4.6L 2V) at AmericanMuscle.com - Free Shipping! How much HP you guys think that would GAIN me with the mods i have __________________ MMR-Modular Mustang Racing Phils Machining-For your ABS Module Delete Manifold! American Muscle-www.Americanmuscle.com HorsePower By Hermonn-TUNER THANKS TO ALL SPONSORS,READY FOR THIS 2012 RACING SEASON!

July 14th, 2009, 11:42 PM	#2
GTRACER88 Hardcore Enthusiast Join Date: May 2008 Location: Houston, TX Posts: 2,153 iTrader: 1 reviews	20-35 rwhp. __________________ Super Slow 2011 Grabber blue V6...

July 15th, 2009, 12:51 AM	#3
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	depends on milage...should be around 300rwhp mark __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

July 15th, 2009, 12:53 AM	#4
SilverStang03 Hardcore Enthusiast 2003 Mustang Gt Join Date: Aug 2007 Location: Barrington RI Posts: 1,292 iTrader: 0 reviews	prob 15 to 20. you need lt headers to give those cams full potential. __________________

July 15th, 2009, 12:56 AM	#5
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	well idk about headers....idk to ME 2v and LTs don't do alot like to respond that the 3v and 4v get. They will help though fo sho __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

July 15th, 2009, 01:08 AM	#7
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	yes sir....i would say subframes and alm driveshaft would be better than LTs in overall __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

July 15th, 2009, 01:34 AM	#8
AggieStang WHOOP! 2002 Mustang GT 7.44@95 (1/8) Join Date: Oct 2007 Location: TEXAS Posts: 3,128 iTrader: 3 reviews	I have those cams and bbk shorties and I really didn't gain anything... I'm hoping it was just a super conservative tune though. __________________ Buy my: Nitrous Accessories Diablosport Programmer In The Classifieds

July 15th, 2009, 01:41 AM	#10
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	well i hear subframes is a great mod. and rev faster with the alm. BUT if youplan on doing LTs later on do it now do you don't have to re-tune __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

July 15th, 2009, 01:42 AM	#11
SilverStang03 Hardcore Enthusiast 2003 Mustang Gt Join Date: Aug 2007 Location: Barrington RI Posts: 1,292 iTrader: 0 reviews	i never really got what subframes did for you.......i guess its better for turns and handling???? all i know is i would do some control arms. __________________

July 15th, 2009, 01:47 AM	#12
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	body roll. have a multi piece body it helps roll and keeps it solid. and after year or hole shots your body twist and bends. keeps it one __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

July 15th, 2009, 01:48 AM	#13
SilverStang03 Hardcore Enthusiast 2003 Mustang Gt Join Date: Aug 2007 Location: Barrington RI Posts: 1,292 iTrader: 0 reviews	makes sense..... __________________

July 15th, 2009, 01:48 AM	#14
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	cheap too __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

July 15th, 2009, 01:56 AM	#15
JasonT1124 Regular 2000 Mustang 4.6l Join Date: Feb 2009 Location: Mesa, AZ Posts: 433 iTrader: 2 reviews	I will sell you a set of Comp Cam 262AHs with only 1200 miles on em for $450 plus shipping...

July 15th, 2009, 12:06 PM	#16
Boostang Hardcore Enthusiast 1997 Mustang GT 11.01@128.32 Join Date: Jan 2009 Location: Seale, Alabama Posts: 1,748 iTrader: 0 reviews	if im not mistaking dont u have to fly cut your pistons with the comp 270's? dont quote me on this!?!? __________________ If It Dont Flow It Wont Go!!! forged pistons,teksid block and a romeo cast cranks for sale.. pm if interested.. selling them for next too nothing

July 15th, 2009, 01:48 PM	#17
GTRACER88 Hardcore Enthusiast Join Date: May 2008 Location: Houston, TX Posts: 2,153 iTrader: 1 reviews	Sometimes. They are not always a perfect fit. __________________ Super Slow 2011 Grabber blue V6...

July 15th, 2009, 02:39 PM	#18
AggieStang WHOOP! 2002 Mustang GT 7.44@95 (1/8) Join Date: Oct 2007 Location: TEXAS Posts: 3,128 iTrader: 3 reviews	I got mine fly cut __________________ Buy my: Nitrous Accessories Diablosport Programmer In The Classifieds

July 15th, 2009, 02:41 PM	#19
Boostang Hardcore Enthusiast 1997 Mustang GT 11.01@128.32 Join Date: Jan 2009 Location: Seale, Alabama Posts: 1,748 iTrader: 0 reviews	i thought so.. i favor the cms stage 2's tho but thats because im about to spray so it makes since.. __________________ If It Dont Flow It Wont Go!!! forged pistons,teksid block and a romeo cast cranks for sale.. pm if interested.. selling them for next too nothing

July 15th, 2009, 05:39 PM	#20
SilverStang03 Hardcore Enthusiast 2003 Mustang Gt Join Date: Aug 2007 Location: Barrington RI Posts: 1,292 iTrader: 0 reviews	how much does flycutting run? __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Cams
Thread	Thread Starter	Forum	Replies	Last Post
Turbo cams vrs supercharger cams	adrenaline=lifeline	4V / SVT	45	October 31st, 2008 12:20 PM
Turbo cams vrs supercharger cams	adrenaline=lifeline	99-04	7	October 26th, 2008 02:10 PM
Thumper cams or Stage II SPR cams.	07stanggt	2005 - 2010	26	August 17th, 2008 08:42 PM
Comp Cams SPR stage 2 cams on the way!!!	RStrick0352	2005 - 2010	10	August 9th, 2008 03:06 AM

All times are GMT -4. The time now is 03:06 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.