| ![]() | ||||||||||||
| |||||||||||||
|
|||||||
![]() |
|
|
|
LinkBack (1) | Thread Tools |
|
|
#1
|
|
Newbie
2003 Mustang GT
Join Date: Dec 2008
Location: MCB Camp Pendleton, CA
Posts: 49
![]() iTrader: 0 reviews
|
Auto Transmission
Sup guys. So I just bought/stole this amazing '01 mustang GT conv. that's pushing 500 horses and has nitrous in case i feel compelled to hit 650, only thing is not one week into hunting for rice...... the tranny takes a dive on me. Just so you guys don't start ranting on how i got ripped, here's what this thing came like:
vortech T-trim pushing 10 psi forged bottom end rebuilt engine comp cams mach 1 intake equal length headers NX nitrous system w/ 150 shot solenoids all this for 9k the list goes on and on. back to the subject, i owned an '03 auto GT who's tranny also took a dive on me so i rebuilt it and its acting like it wants to dive AGAIN... i'm at a loss for words, 2 Mustangs and 2 dead trannies... what auto tranny is rated for 800 hp or can at least withstand this much muscle? i want something that i don't have to worry about. i rather worry about who's next rather than is my tranny going. Sorry but i'm keeping it auto b/c this car will go back to the east coast and i HATE the 95. Help me out guys, i need to put some ricers in their place! thanks in advance. ps: keep it as cheap as possible
__________________
I must be a nympho cuz i'm always getting screwed.. oy...
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#3 |
|
BYAHHHH!
2001 Mustang GT
13.874
Join Date: Mar 2008
Location: Missouri
Posts: 14,793
Blog Entries: 1
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() iTrader: 3 reviews
|
or lentech auto...but try SilverFox first
__________________
![]() Precision Turbo|TurboSmart|TeamZ|Strange|Hellion|BBK|SCT|Edge Converters|Fairbanks|CG Fabrications|Treadstone |
|
|
|
#4 |
|
Newbie
Join Date: Sep 2009
Posts: 3
![]() iTrader: 0 reviews
|
Mach 1 intake?
That caught my eye. Bullitt intake maybe but not Mach 1. That's basically a Cobra eng. Intake won't interchange. as far as the trans goes there is just no way to do a good strong auto on the cheap. A good all stock rebuild will set you back $1500 min and that is if you remove the trans. There are plenty of good trans shops out there. Here are a few online that have 4R70W's ready to goe.PerformaBuilt There is also these guys:Ford-AODE.com the Ultimate AODE / 4R70W Performance Transmission Website Check out this info. If you want to put that kind of power through an auto trans on a regular basis there really is no cheap way to do it. I am a fan of autos my 2000 GT conv is an auto and I would have it no other way. Good luck and Semper Fi.
|
|
|
|
#5 |
|
Regular
2002 Mustang GT 4R70W
11.65@115.86 2V N/A
Join Date: Mar 2009
Location: Raeford, NC
Posts: 433
![]() iTrader: 0 reviews
|
Do you manually shift or manually down shift while driving??? Do you go WOT in O/D....if you do any of these you will toast your tranny......O/D just use for cruising only....don't punch it on the freeway doing 70.....stay in drive or just press the O/D button if you want to move out.......and manually shifting will tear up the Valve Body if it isn't a manual V/B.......stay away from this and you will have a tranny last forever...
"ED"
__________________
"You gonna let an Automatic beat ya?" 2002 Zinc Yellow GT 355 HP/348 TQ N/A TFS 44cc heads,Stage 3 cams, Forged-Aluminum block, 9.3 CR, full exhaust and bolt ons 11.65@115.86 so far built to handle 1000hp....
|
|
|
|
#6 | |
|
Newbie
Join Date: Sep 2009
Posts: 3
![]() iTrader: 0 reviews
|
|
|
|
|
|
#7 |
|
Moderator
2012 300a gt auto
12.10@116
Join Date: Mar 2008
Location: creighton pa
Posts: 7,697
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() iTrader: 4 reviews
|
ps: keep it as cheap as possible
[/QUOTE]that's your biggest problem, can't cheap out on an auto. that being said, a very mild 4r70w (the trans in your car) can handle way more power than your car has, I'd look into your driving style & habbit's (especially since this is the third one that's blown up on you).
__________________
MM BRACKET RACING CREW CO-FOUNDER BAMA Performance Drag Team Founder 2012 300a GT auto
|
|
|
|
#8 |
|
BYAHHHH!
2001 Mustang GT
13.874
Join Date: Mar 2008
Location: Missouri
Posts: 14,793
Blog Entries: 1
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() iTrader: 3 reviews
|
i down shift at 40....it seems fine. but usually 30 or below
__________________
![]() Precision Turbo|TurboSmart|TeamZ|Strange|Hellion|BBK|SCT|Edge Converters|Fairbanks|CG Fabrications|Treadstone |
|
|
|
#9 |
|
Newbie
2003 Mustang GT
Join Date: Dec 2008
Location: MCB Camp Pendleton, CA
Posts: 49
![]() iTrader: 0 reviews
|
I keep it in drive and don't touch it. what i'm hearing is if i'm cruising and need to punch it, turn off the OD? I thought it was opposite? keep it off while fartin around and back on when i punch it.
The transmission actually came with an intercooler on it but i'm gonna take a look into all this, see if it's mounted right, and get a bigger pan. the owner lived in vegas so i'm thinking that took a toll on it. he also had the car tuned at an LS1 shop so i'm thinking that couldn't help either. the car runs perfectly but the trans is slush. i think it could run cooler. thanks for the suggestions, i've just never heard of transmissions going out like they have on me and i don't drive any different then some of my friends. For clarification: its a Mach 1 functional hood.
__________________
I must be a nympho cuz i'm always getting screwed.. oy...
|
|
|
|
#10 |
|
Admanistrator
|
it doesnt matter if it is in OD or not when you go WOT. the tranny automatically disengages OD when the gas is increased.
OP, did you put it in neutral, rev it up, then drop it into drive (N-bomb)? |
|
|
|
#11 |
|
MM's Ford Truck Guy
99 ranger,2010 ranger
does nice burnouts
Join Date: Feb 2008
Location: Stafford, VA
Posts: 1,382
![]() ![]() iTrader: 0 reviews
|
you might wanna check the cooler for particles of metal and such cause there is alot of vehicals that get brand new transmissions and start doing the same stuff just a lil bit down the road because of the tranny cooler has metal shavings in it.
__________________
![]() 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits |
|
|
|
#12 |
|
Newbie
2003 Mustang GT
Join Date: Dec 2008
Location: MCB Camp Pendleton, CA
Posts: 49
![]() iTrader: 0 reviews
|
I never bomb it... that requires deep pockets ha
so your saying the intercooler could've actually caused this problem? is it possible to have a small thing wrong with a transmission or if it's not engauging your F'ed?
__________________
I must be a nympho cuz i'm always getting screwed.. oy...
|
|
|
|
#13 |
|
MM's Ford Truck Guy
99 ranger,2010 ranger
does nice burnouts
Join Date: Feb 2008
Location: Stafford, VA
Posts: 1,382
![]() ![]() iTrader: 0 reviews
|
for one its a trans cooler not a intercooler just thought id through that in there and for the rest of it im not saying it did cause it i said it might have because ive seen vehicals in the past have that problem and how small is the problem exactlly like whats it doing?
__________________
![]() 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits |
|
|
|
#14 |
|
Newbie
2003 Mustang GT
Join Date: Dec 2008
Location: MCB Camp Pendleton, CA
Posts: 49
![]() iTrader: 0 reviews
|
damn, thanks for throwing it in there lol (TV); the other day i was driving it around, stopped for 20 mins, came back out and got only an 1/8 mile when i went to go from a stop it just revved like i had it in nuetral. I put it in 2nd, and slowly gassed again.. it sputtered but never caught. Nothing in 1st, just more revving. So i've let it sit since last Thursday and have started it up and it hooked up in drive today but i'm not risking it dying half way to a shop. Any possible common problem?
__________________
I must be a nympho cuz i'm always getting screwed.. oy...
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
|
|
LinkBacks (?)
LinkBack to this Thread: http://www.moddedmustangs.com/forums/99-04/136682-auto-transmission.html
|
||||
| Posted By | For | Type | Date | |
| Auto Transmission Gillette | This thread | Pingback | September 13th, 2009 09:47 PM | |
Threads Similar to: Auto Transmission
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Transmission flush - 05 Auto | fatalflaw | 2005 - 2010 V6 | 6 | August 18th, 2009 05:54 PM |
| 92 lx 5.0 Transmission Auto | bob | 5.0 Mustangs | 0 | September 28th, 2008 08:08 PM |
| 65 mustang auto transmission | stalker | Classic Mustangs | 10 | September 26th, 2008 06:59 PM |
| Auto Transmission question | 04DSGV6 | V6 Mustangs | 9 | September 18th, 2008 11:41 PM |
| Auto transmission removal please help me | Stang6899 | V6 Mustangs | 9 | January 1st, 2008 09:52 AM |