cowl hood

Applehead281 · September 16th, 2009, 08:18 AM

i have found a place in ohio that makes fiberglass cowl hoods, i can get a 4 inch bolt on for 200 ready to paint, they also have a 4 inch pin on hood and its only 99 which one should i get?

njstang · September 16th, 2009, 09:13 AM

First you should post a link so I can see lol

I'd dish the 200 on a bolt on hood, liftoffs are wack unless it's straight up race car. Plus with the lift off you'll HAVE to run hood pins where with the bolt on it's optional

BLOWN2V · September 16th, 2009, 09:30 AM

Originally Posted by njstang

First you should post a link so I can see lol

I'd dish the 200 on a bolt on hood, liftoffs are wack unless it's straight up race car. Plus with the lift off you'll HAVE to run hood pins where with the bolt on it's optional

I dont know about that I would always run hood pins on 99% of the fiberglass hoods on the market... I have seen more then a few break at the latch and fly up smashing the windshield and roof line

njstang · September 16th, 2009, 10:22 AM

Yeah I have heard stories too, I just said it was optional

TheUNZippee! · September 16th, 2009, 10:23 AM

Get the bolt on.

I promise you the pin on will get old real fast.

IloveMYcar · September 16th, 2009, 11:51 AM

linky linky...

SteviGX · September 16th, 2009, 12:04 PM

If its the one i'm thinkin off in cincinnati my buddy had that hood on his bullit and it fit like absolute shit

moosenuk17 · September 16th, 2009, 02:59 PM

get the latch one bro, forget about the hood pics,

Applehead281 · September 16th, 2009, 04:43 PM

Originally Posted by SteviGX

If its the one i'm thinkin off in cincinnati my buddy had that hood on his bullit and it fit like absolute shit

thanks for savin me he trip

, ifound a carbon fiber scoop on ebay for the stock hood i think i will jujst go with it, and save up for a good cowl from harwood or something.

mustanginky · September 16th, 2009, 05:52 PM

yeah if it's cincy composites then they're junk. really bad rep search the corral, there's a sticky on there. i'm sure that's what it is as they sell all kinds of stuff on Ebay.

ChrisJ · September 16th, 2009, 05:54 PM

Originally Posted by SteviGX

If its the one i'm thinkin off in cincinnati my buddy had that hood on his bullit and it fit like absolute shit

Originally Posted by mustanginky

yeah if it's cincy composites then they're junk. really bad rep search the corral, there's a sticky on there. i'm sure that's what it is as they sell all kinds of stuff on Ebay.

100% Correct

SteviGX · September 16th, 2009, 06:39 PM

The same guy bought an H.O. Fibertrends 5" cowl for his and it fit really well. Said damn near stock

September 16th, 2009, 08:18 AM	#1
Applehead281 Hardcore Enthusiast 2004 mustang gt 13.86@ 100.5 street tires Join Date: Jun 2009 Location: Muncie Indiana Posts: 1,227 iTrader: 0 reviews	cowl hood i have found a place in ohio that makes fiberglass cowl hoods, i can get a 4 inch bolt on for 200 ready to paint, they also have a 4 inch pin on hood and its only 99 which one should i get? __________________ The usual bolt on's..

September 16th, 2009, 11:51 AM	#6
IloveMYcar Enthusiast 2004 GT Join Date: Jan 2009 Location: Illinois Posts: 524 iTrader: 1 reviews	linky linky... __________________ ~2004 Mustang GT 40th ~2006 636 kawasaki ninja

September 16th, 2009, 12:04 PM	#7
SteviGX Hardcore Enthusiast 2002 Mustang GT 13.538@101.72 before cams&slicks&gears Join Date: May 2007 Location: Indianapolis Posts: 1,544 iTrader: 2 reviews	If its the one i'm thinkin off in cincinnati my buddy had that hood on his bullit and it fit like absolute shit __________________ Mineral Gray Club Member #2 Just your average 22 year old dumbass If you didn't build your car, and your bragging about it, STFU

September 16th, 2009, 02:59 PM	#8
moosenuk17 MM Fanatic 2000 ford mustang GT Join Date: Apr 2008 Location: san diego CA Posts: 4,011 iTrader: 0 reviews	get the latch one bro, forget about the hood pics, __________________ 2000 kenne bell GT (440HP-432TQ) Tuned by Joe at http://www.tricktuners.com dyno vid:http://youtu.be/lr3xpxw2_v8 2011 escape MUSTANG TAT CREW

September 16th, 2009, 05:52 PM	#10
mustanginky MM Fanatic 2000 gt Join Date: Feb 2009 Location: La grange, KY Posts: 4,259 iTrader: 2 reviews	yeah if it's cincy composites then they're junk. really bad rep search the corral, there's a sticky on there. i'm sure that's what it is as they sell all kinds of stuff on Ebay. __________________ Procharged 2000 5 Speed BAB GT, built motor, blower cams, speedy dyno tune 412 hp, 450 rw tq HARDCORE CREW BRIGHT ATLANTIC BLUE CREW #1 MEMBER

September 16th, 2009, 06:39 PM	#12
SteviGX Hardcore Enthusiast 2002 Mustang GT 13.538@101.72 before cams&slicks&gears Join Date: May 2007 Location: Indianapolis Posts: 1,544 iTrader: 2 reviews	The same guy bought an H.O. Fibertrends 5" cowl for his and it fit really well. Said damn near stock __________________ Mineral Gray Club Member #2 Just your average 22 year old dumbass If you didn't build your car, and your bragging about it, STFU

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: cowl hood
Thread	Thread Starter	Forum	Replies	Last Post
Cowl Hood?	330CubeGt	96-98	43	February 10th, 2009 10:14 AM
Cowl Hood Help	MSVR3	2005 - 2010	14	November 15th, 2008 09:28 AM
cowl hood	1fasts/c2003	Modular Mustangs	3	November 10th, 2007 07:56 PM

All times are GMT -4. The time now is 01:10 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.

cowl hood

cowl hood

good lookin out!