Guess my time!

BakerFX4 · September 20th, 2009, 09:00 PM

gay gears! LOL.... You must can drive pretty good. What was the temperature out there?

bandity2k00 · September 20th, 2009, 09:17 PM

Haha not sure, id say 80

suprajay79 · September 20th, 2009, 09:40 PM

Holy f*ck, gears in the diff?

bandity2k00 · September 20th, 2009, 10:27 PM

Yeah baker i looked at just now, i didnt break the 4.10s thank god, i broke the spider gear, its the gear that turns the 2 axles, I wonder if they have a aftermarket stronger one i can get, it didnt break, the edges got bent and grinded off and its got alotta slop in it and it only grabs on a few teeth.

Boostang · September 20th, 2009, 10:49 PM

ive never heard of them breaking before.. its usually the diff or the d/s

BakerFX4 · September 20th, 2009, 11:23 PM

did you already order some more?

asiansensation78 · September 21st, 2009, 12:26 AM

I'll guess 11.7, can you raise the redline so you don't have to go into 5th?

08blkgt500 · September 21st, 2009, 12:31 AM

low 12... at the 60 mark

haha jk, no idea. have fun!

02S281 · September 21st, 2009, 12:34 AM

11.8 - 12.1

BakerFX4 · September 21st, 2009, 12:42 AM

he already ran... broke his spider gear.

08blkgt500 · September 21st, 2009, 12:46 AM

Originally Posted by BakerFX4

he already ran... broke his spider gear.

aww really?

bandity2k00 · September 21st, 2009, 06:48 PM

lol ya 12.2 spnning lol..1.9 60 foot

mrbigjeep · September 21st, 2009, 09:02 PM

dang...1.7 sixty foot and you would have some elevens...

i dunno that i'd even bother going to fifth lol...and for those that wondered about why he going into fifth...4.10's only take you to 111 in fourth gear

BakerFX4 · September 21st, 2009, 09:07 PM

how about 410s with a 28" tall tire?

mrbigjeep · September 21st, 2009, 09:22 PM

that would work...would be like putting a higher gear in the car (lower number)

i dunno how much of a difference it would make...like how much further he could go in fourth but i would imagine he may be able to keep it in fourth till the end. just needs a few more mph in fourth

bandity2k00 · September 21st, 2009, 09:37 PM

I kept it in 4th dead on red line at 115mph..4.10s and 26 inch tires were perfect there. Might go a little in red at night but the dyno took it to 6250 rpm,i only went to 5700 at the track, the 4.10s and 26 inch tires are a really good combo because your in boost all the time, at the end of the quarter i was sitting at 9lbs, So the car is definatley going to be faster with 4.10s with my mods, only would have to go into 5th if i modded the car more and got up hp a good bit. Anything under 400 i recommened 4.10s and the 25.8 tire..Baker..I dont know about the 425 hp..you could try it..just go to 6200 at the line, if its more then that then go to the 28 and put them heads on

mounder27 · September 21st, 2009, 11:45 PM

what does your 1/8th mile and 60' look like on the 12.2 run? if you run a 28" you just knocking down the grears and to me that wont do anything....

bandity2k00 · September 22nd, 2009, 12:01 AM

1.9 60 foot, i spun...i can knock that down..scared to go back and break the car again though..i dont know yet..and my 1/8 mile was 8.03, nice 1/8 mile i see you got there

mounder27 · September 22nd, 2009, 12:19 AM

i think you can get 11's if you drop the hammer on it, but you cant be scared to do it, i used to launch at 5k on my stock rear and axles, they lasted just fine, i got a bulit rear now but you gotta let it rip if you want results

bandity2k00 · September 23rd, 2009, 12:41 AM

Yeah, how much was your built rear. Thats what i want to do soon.

September 20th, 2009, 09:00 PM	#21
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 15,607 iTrader: 14 reviews	gay gears! LOL.... You must can drive pretty good. What was the temperature out there? __________________

September 20th, 2009, 09:17 PM	#22
bandity2k00 Baker Jr. 2002 Mustang GT Coming after build!! Join Date: Mar 2008 Location: Gambrills,MD Posts: 2,874 iTrader: 3 reviews	Haha not sure, id say 80 __________________ MMR-Modular Mustang Racing Phils Machining-For your ABS Module Delete Manifold! American Muscle-www.Americanmuscle.com HorsePower By Hermonn-TUNER THANKS TO ALL SPONSORS,READY FOR THIS 2012 RACING SEASON!

September 20th, 2009, 10:27 PM	#24
bandity2k00 Baker Jr. 2002 Mustang GT Coming after build!! Join Date: Mar 2008 Location: Gambrills,MD Posts: 2,874 iTrader: 3 reviews	Yeah baker i looked at just now, i didnt break the 4.10s thank god, i broke the spider gear, its the gear that turns the 2 axles, I wonder if they have a aftermarket stronger one i can get, it didnt break, the edges got bent and grinded off and its got alotta slop in it and it only grabs on a few teeth. __________________ MMR-Modular Mustang Racing Phils Machining-For your ABS Module Delete Manifold! American Muscle-www.Americanmuscle.com HorsePower By Hermonn-TUNER THANKS TO ALL SPONSORS,READY FOR THIS 2012 RACING SEASON!

September 20th, 2009, 11:23 PM	#26
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 15,607 iTrader: 14 reviews	did you already order some more? __________________

September 21st, 2009, 12:26 AM	#27
asiansensation78 Too Soon, Junior! 03 GT Vert 15:43.28@25.21 Too many naked bitches in the back Join Date: Jul 2009 Location: Columbus, OH Posts: 3,694 iTrader: 4 reviews	I'll guess 11.7, can you raise the redline so you don't have to go into 5th? __________________ 03 GT - Scrapes on lane markers - Modded 02 Cougar - Able to clear most speed bumps - Some mods 01 Explorer - Parking blocks NOM NOM NOM - Stock

September 20th, 2009, 10:49 PM	#25
Boostang Hardcore Enthusiast 1997 Mustang GT 11.01@128.32 Join Date: Jan 2009 Location: Seale, Alabama Posts: 1,748 iTrader: 0 reviews	ive never heard of them breaking before.. its usually the diff or the d/s

September 21st, 2009, 12:31 AM	#28
08blkgt500 AKA Greased-up Deaf Guy 2008 Shelby GT500 Join Date: Apr 2009 Location: San Jose, CA/Denver, CO Posts: 9,607 iTrader: 0 reviews	low 12... at the 60 mark haha jk, no idea. have fun! __________________ MM Cobra Club #24

September 21st, 2009, 12:34 AM	#29
02S281 Regular 02 Saleen Speedster #681 Join Date: Jul 2008 Location: Hudson Valley NY Posts: 103 iTrader: 0 reviews	11.8 - 12.1 __________________ 2002 Saleen #681 -Kenne Bell 2.1 intercooled 10psi w/BAP -Kenne bell inlet components -Kenne bell switch chip -75mm throttle body -90mm mass air meter -Nitto 555R's 285/45/18

September 21st, 2009, 12:42 AM	#30
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 15,607 iTrader: 14 reviews	he already ran... broke his spider gear. __________________

September 21st, 2009, 06:48 PM	#32
bandity2k00 Baker Jr. 2002 Mustang GT Coming after build!! Join Date: Mar 2008 Location: Gambrills,MD Posts: 2,874 iTrader: 3 reviews	lol ya 12.2 spnning lol..1.9 60 foot __________________ MMR-Modular Mustang Racing Phils Machining-For your ABS Module Delete Manifold! American Muscle-www.Americanmuscle.com HorsePower By Hermonn-TUNER THANKS TO ALL SPONSORS,READY FOR THIS 2012 RACING SEASON!

September 21st, 2009, 09:02 PM	#33
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,685 iTrader: 0 reviews	dang...1.7 sixty foot and you would have some elevens... i dunno that i'd even bother going to fifth lol...and for those that wondered about why he going into fifth...4.10's only take you to 111 in fourth gear __________________ cams + 150 shot

September 21st, 2009, 09:07 PM	#34
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 15,607 iTrader: 14 reviews	how about 410s with a 28" tall tire? __________________

September 21st, 2009, 09:22 PM	#35
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,685 iTrader: 0 reviews	that would work...would be like putting a higher gear in the car (lower number) i dunno how much of a difference it would make...like how much further he could go in fourth but i would imagine he may be able to keep it in fourth till the end. just needs a few more mph in fourth __________________ cams + 150 shot

September 21st, 2009, 09:37 PM	#36
bandity2k00 Baker Jr. 2002 Mustang GT Coming after build!! Join Date: Mar 2008 Location: Gambrills,MD Posts: 2,874 iTrader: 3 reviews	I kept it in 4th dead on red line at 115mph..4.10s and 26 inch tires were perfect there. Might go a little in red at night but the dyno took it to 6250 rpm,i only went to 5700 at the track, the 4.10s and 26 inch tires are a really good combo because your in boost all the time, at the end of the quarter i was sitting at 9lbs, So the car is definatley going to be faster with 4.10s with my mods, only would have to go into 5th if i modded the car more and got up hp a good bit. Anything under 400 i recommened 4.10s and the 25.8 tire..Baker..I dont know about the 425 hp..you could try it..just go to 6200 at the line, if its more then that then go to the 28 and put them heads on __________________ MMR-Modular Mustang Racing Phils Machining-For your ABS Module Delete Manifold! American Muscle-www.Americanmuscle.com HorsePower By Hermonn-TUNER THANKS TO ALL SPONSORS,READY FOR THIS 2012 RACING SEASON!

September 21st, 2009, 11:45 PM	#37
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	what does your 1/8th mile and 60' look like on the 12.2 run? if you run a 28" you just knocking down the grears and to me that wont do anything.... __________________ www.wmdracing.net

September 22nd, 2009, 12:01 AM	#38
bandity2k00 Baker Jr. 2002 Mustang GT Coming after build!! Join Date: Mar 2008 Location: Gambrills,MD Posts: 2,874 iTrader: 3 reviews	1.9 60 foot, i spun...i can knock that down..scared to go back and break the car again though..i dont know yet..and my 1/8 mile was 8.03, nice 1/8 mile i see you got there __________________ MMR-Modular Mustang Racing Phils Machining-For your ABS Module Delete Manifold! American Muscle-www.Americanmuscle.com HorsePower By Hermonn-TUNER THANKS TO ALL SPONSORS,READY FOR THIS 2012 RACING SEASON!

September 22nd, 2009, 12:19 AM	#39
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	i think you can get 11's if you drop the hammer on it, but you cant be scared to do it, i used to launch at 5k on my stock rear and axles, they lasted just fine, i got a bulit rear now but you gotta let it rip if you want results __________________ www.wmdracing.net

September 23rd, 2009, 12:41 AM	#40
bandity2k00 Baker Jr. 2002 Mustang GT Coming after build!! Join Date: Mar 2008 Location: Gambrills,MD Posts: 2,874 iTrader: 3 reviews	Yeah, how much was your built rear. Thats what i want to do soon. __________________ MMR-Modular Mustang Racing Phils Machining-For your ABS Module Delete Manifold! American Muscle-www.Americanmuscle.com HorsePower By Hermonn-TUNER THANKS TO ALL SPONSORS,READY FOR THIS 2012 RACING SEASON!

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Guess my time!
Thread	Thread Starter	Forum	Replies	Last Post
Guess the time...	Mickey	The Clubhouse	20	August 9th, 2008 08:15 PM
lets guess my first track time....	e3sean	5.0 Mustangs	34	March 31st, 2008 01:25 AM
Lets Guess My First Track Time.	e3sean	The Clubhouse	14	March 30th, 2008 06:15 PM
need your guess on the time i would run..	88stangGT	5.0 Mustangs	5	March 6th, 2008 10:27 AM
Guess on 1/4 mile time?	silverstang05	2005 - 2010	28	September 20th, 2007 08:40 PM

All times are GMT -4. The time now is 09:17 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.