Need help finding a hard to find part!

PapaSmurf · September 23rd, 2009, 07:09 PM

I am currently searching for a pair of 2001 bullitt mustang valve covers. They are for romeo heads. They are different from the normal gt ones because the oil fill is on the drivers side. I have already called MPS and they didnt have any. I need these bc im doing a bullitt intake swap. I already have almost everything else including the hard to find discontinued throttle cable. Thanks

neverfastenough1 · September 23rd, 2009, 08:26 PM

Quit being so cheap lol. These are sharp but expensive. You would have to use a breather cap due to no hole for the pvc fresh air hose.

BBK Performance Aluminum Valve Covers, 11 Bolt, Driver Side Oil Fill - Silver (4.6L 2V) at AmericanMuscle.com - Free Shipping!

PapaSmurf · September 23rd, 2009, 08:42 PM

id rather stick with the oem covers.

Even though those say drivers side oil fill the picture shows it on the passenger side along with the customer photo as well.

maverick0817 · September 23rd, 2009, 09:08 PM

I think I have found asolution to your problem. I recently put a motor out of a 2001 grand marquis into my 2000 gt. It has the drivers side oil fill. You should be able to get these valve covers in a junkyard for next to nothing. Any 01 grand marquis/ crown vic/ town car should have these

PapaSmurf · September 23rd, 2009, 09:38 PM

that may just work. im wondering if they are romeo valvecovers though. if its a 2001 then it should be

maverick0817 · September 23rd, 2009, 09:44 PM

Yes the motor that went in my car was a romeo PI motor.

PapaSmurf · September 23rd, 2009, 09:54 PM

awsome! thanks new guy LOL

Lefty · September 23rd, 2009, 09:58 PM

Fuck you Caleb

PapaSmurf · September 23rd, 2009, 10:03 PM

SWEET2KSTANG · September 23rd, 2009, 10:34 PM

Originally Posted by neverfastenough1

Quit being so cheap lol. These are sharp but expensive. You would have to use a breather cap due to no hole for the pvc fresh air hose.

BBK Performance Aluminum Valve Covers, 11 Bolt, Driver Side Oil Fill - Silver (4.6L 2V) at AmericanMuscle.com - Free Shipping!

bbk makes both L and R fill for the romeo heads.

Originally Posted by maverick0817

I think I have found asolution to your problem. I recently put a motor out of a 2001 grand marquis into my 2000 gt. It has the drivers side oil fill. You should be able to get these valve covers in a junkyard for next to nothing. Any 01 grand marquis/ crown vic/ town car should have these

the other solution i was going to bring up.

PapaSmurf · September 23rd, 2009, 10:51 PM

thanks everyone reps

Lefty · September 24th, 2009, 11:26 AM

Gee thanks for the reps Caleb

*Sarcasm*

PapaSmurf · September 25th, 2009, 02:57 AM

i tried repping you Troy but it said i needed to "spread some around" before repping you again

Lefty · September 25th, 2009, 09:29 AM

So what you're trying to say is I'm being pwned by the MM site?

GTsetGO · September 25th, 2009, 09:50 AM

nah, just that you suck.

PapaSmurf · September 25th, 2009, 10:01 AM

Lefty · September 25th, 2009, 12:32 PM

September 23rd, 2009, 07:09 PM	#1
PapaSmurf Hardcore Enthusiast 2003 Mustang GT 12.28 @ 116 Join Date: Jan 2008 Location: Chesapeake, VA Posts: 2,474 iTrader: 11 reviews	Need help finding a hard to find part! I am currently searching for a pair of 2001 bullitt mustang valve covers. They are for romeo heads. They are different from the normal gt ones because the oil fill is on the drivers side. I have already called MPS and they didnt have any. I need these bc im doing a bullitt intake swap. I already have almost everything else including the hard to find discontinued throttle cable. Thanks __________________ 2003 Sonic Blue GT---SLP Longtubes, SLP X, Magnaflow Magnapack CB, 75mm TB/Plenum, MP2 Performance stage 2 heads, MHS Stage 3R cams, Built rear w/4.30's Last edited by PapaSmurf; September 23rd, 2009 at 07:12 PM.

September 23rd, 2009, 08:26 PM	#2
neverfastenough1 Hardcore Enthusiast 2002 Mustang GT Join Date: May 2007 Location: Savannah, Ga Posts: 2,777 iTrader: 3 reviews	Quit being so cheap lol. These are sharp but expensive. You would have to use a breather cap due to no hole for the pvc fresh air hose. BBK Performance Aluminum Valve Covers, 11 Bolt, Driver Side Oil Fill - Silver (4.6L 2V) at AmericanMuscle.com - Free Shipping! __________________

September 23rd, 2009, 08:42 PM	#3
PapaSmurf Hardcore Enthusiast 2003 Mustang GT 12.28 @ 116 Join Date: Jan 2008 Location: Chesapeake, VA Posts: 2,474 iTrader: 11 reviews	id rather stick with the oem covers. Even though those say drivers side oil fill the picture shows it on the passenger side along with the customer photo as well. __________________ 2003 Sonic Blue GT---SLP Longtubes, SLP X, Magnaflow Magnapack CB, 75mm TB/Plenum, MP2 Performance stage 2 heads, MHS Stage 3R cams, Built rear w/4.30's Last edited by PapaSmurf; September 23rd, 2009 at 09:03 PM.

September 23rd, 2009, 09:38 PM	#5
PapaSmurf Hardcore Enthusiast 2003 Mustang GT 12.28 @ 116 Join Date: Jan 2008 Location: Chesapeake, VA Posts: 2,474 iTrader: 11 reviews	that may just work. im wondering if they are romeo valvecovers though. if its a 2001 then it should be __________________ 2003 Sonic Blue GT---SLP Longtubes, SLP X, Magnaflow Magnapack CB, 75mm TB/Plenum, MP2 Performance stage 2 heads, MHS Stage 3R cams, Built rear w/4.30's

September 23rd, 2009, 09:54 PM	#7
PapaSmurf Hardcore Enthusiast 2003 Mustang GT 12.28 @ 116 Join Date: Jan 2008 Location: Chesapeake, VA Posts: 2,474 iTrader: 11 reviews	awsome! thanks new guy LOL __________________ 2003 Sonic Blue GT---SLP Longtubes, SLP X, Magnaflow Magnapack CB, 75mm TB/Plenum, MP2 Performance stage 2 heads, MHS Stage 3R cams, Built rear w/4.30's

September 23rd, 2009, 09:08 PM	#4
maverick0817 Banned Join Date: Sep 2009 Posts: 267 iTrader: 0 reviews	I think I have found asolution to your problem. I recently put a motor out of a 2001 grand marquis into my 2000 gt. It has the drivers side oil fill. You should be able to get these valve covers in a junkyard for next to nothing. Any 01 grand marquis/ crown vic/ town car should have these

September 23rd, 2009, 09:44 PM	#6
maverick0817 Banned Join Date: Sep 2009 Posts: 267 iTrader: 0 reviews	Yes the motor that went in my car was a romeo PI motor.

September 23rd, 2009, 09:58 PM	#8
Lefty The Doctor '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 27,388 iTrader: 11 reviews	Fuck you Caleb __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

September 23rd, 2009, 10:03 PM	#9
PapaSmurf Hardcore Enthusiast 2003 Mustang GT 12.28 @ 116 Join Date: Jan 2008 Location: Chesapeake, VA Posts: 2,474 iTrader: 11 reviews	__________________ 2003 Sonic Blue GT---SLP Longtubes, SLP X, Magnaflow Magnapack CB, 75mm TB/Plenum, MP2 Performance stage 2 heads, MHS Stage 3R cams, Built rear w/4.30's

September 23rd, 2009, 10:51 PM	#11
PapaSmurf Hardcore Enthusiast 2003 Mustang GT 12.28 @ 116 Join Date: Jan 2008 Location: Chesapeake, VA Posts: 2,474 iTrader: 11 reviews	thanks everyone reps __________________ 2003 Sonic Blue GT---SLP Longtubes, SLP X, Magnaflow Magnapack CB, 75mm TB/Plenum, MP2 Performance stage 2 heads, MHS Stage 3R cams, Built rear w/4.30's

September 24th, 2009, 11:26 AM	#12
Lefty The Doctor '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 27,388 iTrader: 11 reviews	Gee thanks for the reps Caleb Sarcasm __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

September 25th, 2009, 02:57 AM	#13
PapaSmurf Hardcore Enthusiast 2003 Mustang GT 12.28 @ 116 Join Date: Jan 2008 Location: Chesapeake, VA Posts: 2,474 iTrader: 11 reviews	i tried repping you Troy but it said i needed to "spread some around" before repping you again __________________ 2003 Sonic Blue GT---SLP Longtubes, SLP X, Magnaflow Magnapack CB, 75mm TB/Plenum, MP2 Performance stage 2 heads, MHS Stage 3R cams, Built rear w/4.30's

September 25th, 2009, 09:29 AM	#14
Lefty The Doctor '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 27,388 iTrader: 11 reviews	So what you're trying to say is I'm being pwned by the MM site? __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

September 25th, 2009, 09:50 AM	#15
GTsetGO Cigar Assassin 2004 Mustang GT 12.88 @ 112 Join Date: Aug 2005 Location: A Galaxy Far, Far Away Posts: 13,889 iTrader: 10 reviews	nah, just that you suck. __________________ Cigar Samplers for Sale

September 25th, 2009, 10:01 AM	#16
PapaSmurf Hardcore Enthusiast 2003 Mustang GT 12.28 @ 116 Join Date: Jan 2008 Location: Chesapeake, VA Posts: 2,474 iTrader: 11 reviews	__________________ 2003 Sonic Blue GT---SLP Longtubes, SLP X, Magnaflow Magnapack CB, 75mm TB/Plenum, MP2 Performance stage 2 heads, MHS Stage 3R cams, Built rear w/4.30's

Threads Similar to: Need help finding a hard to find part!
Thread	Thread Starter	Forum	Replies	Last Post
Anyone else have a hard time finding ammo	Big C	The Clubhouse	32	June 6th, 2009 04:36 PM
Need help finding a exhaust part help please	PapaSmurf	99-04	13	March 22nd, 2009 08:37 PM
I Need Help Finding a Part!	330CubeGt	96-98	12	March 1st, 2009 03:05 AM
Need Help Finding RARE part please????	lwhitetrash88l	V6 Mustangs	9	October 30th, 2007 04:49 PM
help finding a part	Nick_Rapitis	The Clubhouse	9	August 1st, 2007 05:28 PM

September 25th, 2009, 12:32 PM	#17
Lefty The Doctor '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 27,388 iTrader: 11 reviews	__________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 09:46 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.