chin spoiler...

moosenuk17 · October 2nd, 2009, 10:04 AM

ive had it in my trunk for about 5 months and im finally gna put it on today. any tips,, its a cosmetic thing so i dont wanna jack it up lol

GidEup · October 2nd, 2009, 10:11 AM

Dont know if it's the same for the mach, but when I put my cobra one on, I had to redrill/clearout some of the holes for the plastic push pins to fit through.

Some people like nuts and bolts instead of the push pins, but I havent had any problems yet with push pins.

Painters tape if you're worried about scratching your paint. If its not bendable, leave it in the sun for a bit.

BakerFX4 · October 2nd, 2009, 10:17 AM

i used 1/4" self tapping screws and it sucked it VERY tight!

t70 · October 2nd, 2009, 10:27 AM

make sure you flush it up at the front of the wheel opening and not with the front of the bumper, its supposed to sit back from the lead edge of the bumper. I did mine wrong the first time then wound up redrilling all the holes
before

after

but you probably knew that, it seems I'm the only one I've come across who didn't know
maybe I should have researched like your doing

BakerFX4 · October 2nd, 2009, 10:33 AM

mine came out like the ^too. I left it though as i didnt like it sitting up under the lip.

moosenuk17 · October 2nd, 2009, 11:34 AM

yea i thought the same thing, flush it with the front and leave the lil gap by the wheel wells

moosenuk17 · October 2nd, 2009, 11:35 AM

Originally Posted by BakerFX4

i used 1/4" self tapping screws and it sucked it VERY tight!

i was thinkin of just drillin holes and puttin nuts and bolts on, i have thos lol

00redgt · October 2nd, 2009, 11:57 AM

dam,mine was even with the front lip and came alway back to the wheel opening

t70 · October 2nd, 2009, 12:02 PM

mine came with bolts and locking nuts a few were a little tough to get to but not bad

00redgt · October 2nd, 2009, 12:11 PM

Originally Posted by moosenuk17

i was thinkin of just drillin holes and puttin nuts and bolts on, i have thos lol

that's what i did,nuts and bolts

moosenuk17 · October 2nd, 2009, 12:17 PM

well off to breakfast while the drill charges, be back with pics soon

93hatch · October 2nd, 2009, 12:19 PM

just sell it to me, mines all fucked up

00redgt · October 2nd, 2009, 12:20 PM

oh and use some masking or the green paint tape to hold it to ur car while you drill an few holes to get it bolted up

mrsinister2424 · October 2nd, 2009, 01:11 PM

Originally Posted by 00redgt

dam,mine was even with the front lip and came alway back to the wheel opening

Your car kinda looks like mine!

suprajay79 · October 2nd, 2009, 01:23 PM

Originally Posted by t70

make sure you flush it up at the front of the wheel opening and not with the front of the bumper, its supposed to sit back from the lead edge of the bumper. I did mine wrong the first time then wound up redrilling all the holes

+1. As soon as I get a chance, I'm drilling out the rivets that I put in and fixing it. I have like an inch on the driver's side missing from the bumper. That's what happens when you don't take the time to line it all up and do it right the first time!

moosenuk17 · October 2nd, 2009, 03:54 PM

Originally Posted by 00redgt

oh and use some masking or the green paint tape to hold it to ur car while you drill an few holes to get it bolted up

good idea! i just had my good friend sara hold it there

moosenuk17 · October 2nd, 2009, 04:18 PM

Jakashh · October 2nd, 2009, 04:25 PM

Originally Posted by 00redgt

dam,mine was even with the front lip and came alway back to the wheel opening

Originally Posted by mrsinister2424

Your car kinda looks like mine!

same here, minus the black hood scoop.

Laser red is so much more badass than rio red or whatever the hell type of gay fagdar name they gave it.

6ER THEN I 8ER! · October 2nd, 2009, 04:46 PM

self tapping screws is what i used...8 of them to be precise...

BakerFX4 · October 2nd, 2009, 06:38 PM

yeah the self tappers do it nice.!

October 2nd, 2009, 10:04 AM	#1
moosenuk17 MM Fanatic 2000 ford mustang GT Join Date: Apr 2008 Location: san diego CA Posts: 4,014 iTrader: 0 reviews	chin spoiler... ive had it in my trunk for about 5 months and im finally gna put it on today. any tips,, its a cosmetic thing so i dont wanna jack it up lol __________________ 2000 kenne bell GT (440HP-432TQ) Tuned by Joe at http://www.tricktuners.com dyno vid:http://youtu.be/lr3xpxw2_v8 2011 escape MUSTANG TAT CREW

October 2nd, 2009, 10:17 AM	#3
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 15,607 iTrader: 14 reviews	i used 1/4" self tapping screws and it sucked it VERY tight! __________________

October 2nd, 2009, 10:27 AM	#4
t70 Regular 2000 GT CONVERTIBLE Join Date: Nov 2008 Location: ILLINOIS Posts: 208 iTrader: 0 reviews	make sure you flush it up at the front of the wheel opening and not with the front of the bumper, its supposed to sit back from the lead edge of the bumper. I did mine wrong the first time then wound up redrilling all the holes before after but you probably knew that, it seems I'm the only one I've come across who didn't know maybe I should have researched like your doing __________________ silvermustangsregistry#0711

October 2nd, 2009, 10:33 AM	#5
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 15,607 iTrader: 14 reviews	mine came out like the ^too. I left it though as i didnt like it sitting up under the lip. __________________

October 2nd, 2009, 11:34 AM	#6
moosenuk17 MM Fanatic 2000 ford mustang GT Join Date: Apr 2008 Location: san diego CA Posts: 4,014 iTrader: 0 reviews	yea i thought the same thing, flush it with the front and leave the lil gap by the wheel wells __________________ 2000 kenne bell GT (440HP-432TQ) Tuned by Joe at http://www.tricktuners.com dyno vid:http://youtu.be/lr3xpxw2_v8 2011 escape MUSTANG TAT CREW

October 2nd, 2009, 10:11 AM	#2
GidEup Regular 2002 Mustang GT Slower than your ability to post a question that can easily be found via search Join Date: Feb 2009 Posts: 213 iTrader: 0 reviews	Dont know if it's the same for the mach, but when I put my cobra one on, I had to redrill/clearout some of the holes for the plastic push pins to fit through. Some people like nuts and bolts instead of the push pins, but I havent had any problems yet with push pins. Painters tape if you're worried about scratching your paint. If its not bendable, leave it in the sun for a bit.

October 2nd, 2009, 11:57 AM	#8
00redgt MM Fanatic 2000 mustang gt Join Date: Oct 2007 Location: vansant,va Posts: 4,073 iTrader: 5 reviews	dam,mine was even with the front lip and came alway back to the wheel opening __________________

October 2nd, 2009, 12:02 PM	#9
t70 Regular 2000 GT CONVERTIBLE Join Date: Nov 2008 Location: ILLINOIS Posts: 208 iTrader: 0 reviews	mine came with bolts and locking nuts a few were a little tough to get to but not bad __________________ silvermustangsregistry#0711

October 2nd, 2009, 12:17 PM	#11
moosenuk17 MM Fanatic 2000 ford mustang GT Join Date: Apr 2008 Location: san diego CA Posts: 4,014 iTrader: 0 reviews	well off to breakfast while the drill charges, be back with pics soon __________________ 2000 kenne bell GT (440HP-432TQ) Tuned by Joe at http://www.tricktuners.com dyno vid:http://youtu.be/lr3xpxw2_v8 2011 escape MUSTANG TAT CREW

October 2nd, 2009, 12:19 PM	#12
93hatch Banned 1992 Lx 11.39@119.24 Join Date: Jan 2008 Location: Az Posts: 11,665 iTrader: 0 reviews	just sell it to me, mines all fucked up __________________ [QUOTE=93mustank;2577445]We speed tested my right arm for quickness in shifts... So he could design the cam for proper shift recovery.[/QUOTE]

October 2nd, 2009, 12:20 PM	#13
00redgt MM Fanatic 2000 mustang gt Join Date: Oct 2007 Location: vansant,va Posts: 4,073 iTrader: 5 reviews	oh and use some masking or the green paint tape to hold it to ur car while you drill an few holes to get it bolted up __________________

October 2nd, 2009, 04:18 PM	#17
moosenuk17 MM Fanatic 2000 ford mustang GT Join Date: Apr 2008 Location: san diego CA Posts: 4,014 iTrader: 0 reviews	__________________ 2000 kenne bell GT (440HP-432TQ) Tuned by Joe at http://www.tricktuners.com dyno vid:http://youtu.be/lr3xpxw2_v8 2011 escape MUSTANG TAT CREW

October 2nd, 2009, 04:46 PM	#19
6ER THEN I 8ER! Premium Member 3.9L V6 Join Date: Apr 2007 Location: Portland, TN Posts: 20,970 iTrader: 1 reviews	self tapping screws is what i used...8 of them to be precise... __________________ [SIGPIC][/SIGPIC] 6k HIDs - Rear Sway Bar - Mac Prochamber - Goodridge Gstop SS Lines - Lots of Visual Fun - Go Fast Mods (no point in buying...it's a v6) Want to see your car as art...ask me how

October 2nd, 2009, 06:38 PM	#20
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 15,607 iTrader: 14 reviews	yeah the self tappers do it nice.! __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: chin spoiler...
Thread	Thread Starter	Forum	Replies	Last Post
Chin Spoiler	Bush18	99-04	14	February 24th, 2009 11:42 PM
chin spoiler	rdbrown15	Visual	8	November 10th, 2008 01:59 PM
chin spoiler	Blk01ponyGT	99-04	24	August 12th, 2007 03:00 PM
chin spoiler ??	91foxhatch5.0	Visual	1	June 4th, 2007 06:04 PM
CHIN SPOILER HELP!!!	Jeff99gt	99-04	6	January 4th, 2007 01:22 PM

All times are GMT -4. The time now is 09:22 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.