Ordered my TFS heads today

mounder27 · November 16th, 2009, 09:47 PM

OK so i ordered a SB (MMR 600 with manly h beams) from MMR about 6 weeks ago and and now im adding the iceing to the cake, TFS TWISTED WEDGE HEADS. I need some suggestions on what kind of cam profile i should run, i know that these things can handle the .600 lift and woul dlike to get a set of cams that will be streetable but need them to kick some ass, i plan on turning up the boost on my s trim to 15-18 lbs and running a FMIC along with my water/meth injection...summit told me that my heads will ship the first week of December...

GTermi · November 16th, 2009, 09:51 PM

lucky sob lol

mounder27 · November 16th, 2009, 09:53 PM

Lucky my ass this on a card so i have to pay it off this year, and my wife doesn't know yet, so im sure i'll be getting an ass whippin for this...LOL

GTermi · November 16th, 2009, 09:54 PM

haha, what she dont know wont hurt her.lol. shell know somes up when ur car pulls up thumping and shaking the whole house.

Scott2001GT · November 16th, 2009, 09:57 PM

haha very nice! 600hp...u don't think your out do that with your blower if you go to a T-trim?

mounder27 · November 16th, 2009, 10:00 PM

no t trim here, eventually i'll get one but the price has got to be right, as long as the little s trim keeps chuggin fuck it, im sure it'll make some power it just depends on the tune...

carnut59 · November 16th, 2009, 10:01 PM

go to cushman motorsports, he has some new grinds for those heads.

Scott2001GT · November 16th, 2009, 10:02 PM

Originally Posted by mounder27

no t trim here, eventually i'll get one but the price has got to be right, as long as the little s trim keeps chuggin fuck it, im sure it'll make some power it just depends on the tune...

so if you found the deal on a T trim aren't you worried about going over 600hp?

mounder27 · November 16th, 2009, 10:04 PM

no because i upgraded the rods to manley h beams instead of the i beams they have in the regular MMR 600

Scott2001GT · November 16th, 2009, 10:07 PM

oh nice! good build man!

mounder27 · November 16th, 2009, 10:07 PM

im think about contacting tim from MPH for a set of custom ground cams...

OneBadNotch · November 16th, 2009, 10:14 PM

lol...that would be nice, but if you think your wife is gonna flip about the heads, wait till she sees the price on custom cams. But hell, i aint gonna lie, i would listen to bitching for a week for them.

mounder27 · November 16th, 2009, 10:18 PM

you got that right, although i think MPH will do a set of custom ground cams the same price as his regular off the shelf cams...thats what ive heard anyways...

slow02gt · November 17th, 2009, 08:34 PM

your not going to get 18lbs out of an s-trim... i think jive was maxing his out at 15.5 and was makeing 550..

mounder27 · November 18th, 2009, 02:31 AM

here ya go ladies read it and weep....

the guys up at MMR are cool as hell and would recommend them any day, they had quite a small shop considering there one of the biggest names around, but great things come in small packages right? 18cc probe forged pistons, manley 4340 forged h beam connecting rods, ford racing cast iron crank shaft, fly cut pistons, MMR windage tray, MMR 7 quart oil pan, alex, the the engine tech told me that this set up with the manley rods will hold 800 hp, and that is more then i need so overall the wait was worth it....

Scott2001GT · November 18th, 2009, 02:35 AM

shit I want my shit! haha

nice man

superbeef1000 · November 18th, 2009, 02:53 AM

good times

04gtblkvert · November 18th, 2009, 09:43 AM

That is awesome good luck on the build. : )

liljojo4711 · November 18th, 2009, 11:20 AM

u know we are going to need some dyno numbers when u get it all built

akvanden · November 18th, 2009, 11:49 AM

what something like this run you? I'm afraid to ask.

November 16th, 2009, 09:47 PM	#1
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	Ordered my TFS heads today OK so i ordered a SB (MMR 600 with manly h beams) from MMR about 6 weeks ago and and now im adding the iceing to the cake, TFS TWISTED WEDGE HEADS. I need some suggestions on what kind of cam profile i should run, i know that these things can handle the .600 lift and woul dlike to get a set of cams that will be streetable but need them to kick some ass, i plan on turning up the boost on my s trim to 15-18 lbs and running a FMIC along with my water/meth injection...summit told me that my heads will ship the first week of December... __________________ www.wmdracing.net

November 16th, 2009, 09:51 PM	#2
GTermi Enthusiast 2004 Mustang GT Join Date: Mar 2009 Location: Fort Worth Posts: 640 iTrader: 0 reviews	lucky sob lol __________________ My Car- 2004 Mustang GT Her Car- 2011 V6 Auto Premium Saving up for either a 2009 Shelby GT500 or a 2011 5.0...Can't decide!

November 16th, 2009, 09:53 PM	#3
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	Lucky my ass this on a card so i have to pay it off this year, and my wife doesn't know yet, so im sure i'll be getting an ass whippin for this...LOL __________________ www.wmdracing.net

November 16th, 2009, 09:54 PM	#4
GTermi Enthusiast 2004 Mustang GT Join Date: Mar 2009 Location: Fort Worth Posts: 640 iTrader: 0 reviews	haha, what she dont know wont hurt her.lol. shell know somes up when ur car pulls up thumping and shaking the whole house. __________________ My Car- 2004 Mustang GT Her Car- 2011 V6 Auto Premium Saving up for either a 2009 Shelby GT500 or a 2011 5.0...Can't decide!

November 16th, 2009, 09:57 PM	#5
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,608 Blog Entries: 1 iTrader: 3 reviews	haha very nice! 600hp...u don't think your out do that with your blower if you go to a T-trim? __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

November 16th, 2009, 10:00 PM	#6
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	no t trim here, eventually i'll get one but the price has got to be right, as long as the little s trim keeps chuggin fuck it, im sure it'll make some power it just depends on the tune... __________________ www.wmdracing.net

November 16th, 2009, 10:01 PM	#7
carnut59 Enthusiast 2001 gt Join Date: Sep 2007 Location: dallas, tx Posts: 770 iTrader: 0 reviews	go to cushman motorsports, he has some new grinds for those heads.

November 16th, 2009, 10:04 PM	#9
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	no because i upgraded the rods to manley h beams instead of the i beams they have in the regular MMR 600 __________________ www.wmdracing.net

November 16th, 2009, 10:07 PM	#10
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,608 Blog Entries: 1 iTrader: 3 reviews	oh nice! good build man! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

November 16th, 2009, 10:14 PM	#12
OneBadNotch Regular 1990 lx Join Date: Jun 2009 Location: Jonesboro,GA Posts: 121 iTrader: 0 reviews	lol...that would be nice, but if you think your wife is gonna flip about the heads, wait till she sees the price on custom cams. But hell, i aint gonna lie, i would listen to bitching for a week for them. __________________ 1990 LX 5.4 coming soon

November 16th, 2009, 10:18 PM	#13
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	you got that right, although i think MPH will do a set of custom ground cams the same price as his regular off the shelf cams...thats what ive heard anyways... __________________ www.wmdracing.net

November 17th, 2009, 08:34 PM	#14
slow02gt Hardcore Enthusiast 2002 mustang gt 11.38@119 Join Date: Feb 2008 Location: beaumont, texas Posts: 2,652 iTrader: 1 reviews	your not going to get 18lbs out of an s-trim... i think jive was maxing his out at 15.5 and was makeing 550.. __________________ built motor,trickflow heads,logan intake,80mm comp turbo on the way..

November 18th, 2009, 02:31 AM	#15
mounder27 Enthusiast 02 mustang gt 6.92 @ 99 mph 1/8th Join Date: Sep 2007 Location: san diego,ca Posts: 665 iTrader: 0 reviews	here ya go ladies read it and weep.... the guys up at MMR are cool as hell and would recommend them any day, they had quite a small shop considering there one of the biggest names around, but great things come in small packages right? 18cc probe forged pistons, manley 4340 forged h beam connecting rods, ford racing cast iron crank shaft, fly cut pistons, MMR windage tray, MMR 7 quart oil pan, alex, the the engine tech told me that this set up with the manley rods will hold 800 hp, and that is more then i need so overall the wait was worth it.... __________________ www.wmdracing.net

November 18th, 2009, 02:35 AM	#16
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,608 Blog Entries: 1 iTrader: 3 reviews	shit I want my shit! haha nice man __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

November 18th, 2009, 02:53 AM	#17
superbeef1000 Hardcore Enthusiast Join Date: Aug 2006 Location: mesa , arizona Posts: 1,475 iTrader: 2 reviews	good times __________________ a bunch of stuff to make my car faster http://www.moddedmustangs.com/forums...e-member-1497/

November 18th, 2009, 09:43 AM	#18
04gtblkvert Regular 2003 Mustang Cobra Join Date: Sep 2009 Location: Las Vegas Posts: 282 iTrader: 0 reviews	That is awesome good luck on the build. : )

November 18th, 2009, 11:49 AM	#20
akvanden Regular 2002 Mustang GT Join Date: Jun 2009 Location: Rochester, MN Posts: 296 iTrader: 0 reviews	what something like this run you? I'm afraid to ask. __________________ K&N CAI DiabloSport Predator tune Bassani o/r x pipe Borla cat back Eibach Pro kit Nitto 555r on Cobras

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Ordered my TFS heads today
Thread	Thread Starter	Forum	Replies	Last Post
Got my heads from Fox Lake!! TFS 44cc...	Yellow02GTauto	99-04	63	August 11th, 2009 02:57 PM
TFS 2v heads gone down in price?	PapaSmurf	99-04	7	July 4th, 2009 03:32 AM
TFS heads on basically stock motor	notch9350	5.0 Mustangs	30	June 16th, 2008 09:58 PM
Just ordered my TFS Heads and Cam!!!	Haggis13	5.0 Mustangs	31	March 24th, 2007 06:43 PM

All times are GMT -4. The time now is 11:14 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.