[Teknicz]

i tried the svt room so i decied to post it here also, i will post pics also, but the other day i remove this gauge cluster but the as soon as i popped it off the lock or nut, w/e was holding fell back, i removed the radio, but still couldnt find it, any ideas on how to get it, or a way to hold the gauge cluster? btw, its a 1999 cobra =)

[Blitz34]

do you possibly have something magnetic you can stick down the hole? It's possible that the nut in question is sitting on top of the a/c duct if I'm thinking right.

Its also likely that it fell a good ways and could have landed either on your floor board, under your radio, further back behind other stuff, or underneath everything next to your tanny tunnel. A magnet would help.

[Teknicz]

yea, i've looked around and cant find it, you know what they say when you want something you wont find it until u dont need it lol... but yea i look around those areas thanks bro

[wishIhada5.0]

you def have a dash problem...there is a hole under your gauge pod! lol your best bet is to get a magnet and poke around....i have found a few things that I dropped back there with a magnet

[Teknicz]

lmao yea i figuredd...:::WONDERS what else i would find Hmmm...:::

[Safi]

Remove the 2 bolts under the center panel. Then you should be able to take off the bezel. With the bezel off you should be able to pull out any of the components in the center dash to gain access to wherever you dropped the piece

[ForestGRN_Ghost]

^^^^+1

there easy to get off. just be carful the plastic snaps/cracks kinda easy.



off topic - what lights do you have ?

[mrsinister2424]

Originally Posted by Safi Remove the 2 bolts under the center panel. Then you should be able to take off the bezel. With the bezel off you should be able to pull out any of the components in the center dash to gain access to wherever you dropped the piece

Its been a long time since I had the stock radio.. but I thought you couldn't take the radio out without taking the bezel out. Meaning, didn't he already do that?

[wishIhada5.0]

taking out all the bezels and stuff is no big deal...jus take your time and dont force anything lol

[wraitherx]

Originally Posted by Safi Remove the 2 bolts under the center panel. Then you should be able to take off the bezel. With the bezel off you should be able to pull out any of the components in the center dash to gain access to wherever you dropped the piece

there is also another bolt inside the cavity that holds it to the firewall.

[Teknicz]

Lights, I Have a 10K Hid setup.

Originally Posted by ForestGRN_Ghost ^^^^+1 there easy to get off. just be carful the plastic snaps/cracks kinda easy. off topic - what lights do you have ?

[Teknicz]

I appreciate it guys, will do tommorow.