hellz yah, parts in

mustang_gtr_99 · February 24th, 2010, 08:49 PM

Parts in bitches

Finaly ready to get this show on the road.

By mustang_gtr_99 at 2010-02-23

By mustang_gtr_99 at 2010-02-23

Now I need a new windage trey

Scott2001GT · February 24th, 2010, 08:52 PM

I envy you! haha

nice man!

that shit!

UnixHH · February 24th, 2010, 08:56 PM

haha good shit man. im sitting here looking at the same shit you have.. except im looking online haha..

UnixHH · February 24th, 2010, 08:57 PM

specs on the goods man

Willy Mo · February 24th, 2010, 09:02 PM

damn thats pretty.. I would take a pic of it all and put it on my wall..

UnixHH · February 24th, 2010, 09:05 PM

id sleep in the box hugging the crank and kissing the pistons....

mustang_gtr_99 · February 24th, 2010, 09:12 PM

Forged MMR 900 balanced with 9.5:1 comp. Also have ARP mains and head studs. Have a bone to pick with them about the mains though. They sent me a 2bolt main set and the 05+ block uses 4 bolt mains. I need to confirm this but they told me today that ARP does not make a 4 bolt main kit for aluminum blocks so you use stock TTY bolts on the outer mains

Total was $2,265

UnixHH · February 24th, 2010, 09:15 PM

how much you pay for all that?

mustang_gtr_99 · February 24th, 2010, 09:20 PM

look above

Oh, correction, I got the MMR 800. Only diference was the rods were a little cheaper.

mustang_gtr_99 · February 24th, 2010, 09:29 PM

I still have some small odds and ends but I pretty much have everything for the 3V build

Scott2001GT · February 24th, 2010, 09:30 PM

not a bad price...my next blower is 3200 bucks!

mustang_gtr_99 · February 24th, 2010, 09:44 PM

SHOOT, mine is 6,000

Lefty · February 24th, 2010, 09:48 PM

Holy shit it's Unix

99mustanggtman · February 24th, 2010, 10:00 PM

Cool man, waiting for heads myself, I love getting new parts

UnixHH · February 24th, 2010, 10:06 PM

Originally Posted by Lefty

Holy shit it's Unix

where?!

mustang_gtr_99 · February 24th, 2010, 10:09 PM

Lefty, you should know this off the top of your head. Does ARP make a 4 bolt main stud kit? I think MMR is giving me the run around for there F up

F8L GT · February 24th, 2010, 11:20 PM

your putting head studs in also correct?

EDIT: just saw that you are

naza · February 24th, 2010, 11:31 PM

niiiice brooooooo!!

330CubeGt · February 24th, 2010, 11:33 PM

Nice...

mustang_gtr_99 · February 24th, 2010, 11:44 PM

thanks, long time in the making.

February 24th, 2010, 08:49 PM	#1
mustang_gtr_99 Hardcore Enthusiast 1999 3V GT/2007 GT D/D corner carver Join Date: Feb 2009 Location: Eugene, Oregon Posts: 2,730 iTrader: 2 reviews	hellz yah, parts in Parts in bitches Finaly ready to get this show on the road. By mustang_gtr_99 at 2010-02-23 By mustang_gtr_99 at 2010-02-23 By mustang_gtr_99 at 2010-02-23 By mustang_gtr_99 at 2010-02-23 Now I need a new windage trey __________________ OS2 (SW) USN REAR SEAT DELETE FABRICATOR "RSD pics in garage" 99 3V GT/2007 GT DD

February 24th, 2010, 08:52 PM	#2
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,793 Blog Entries: 1 iTrader: 3 reviews	I envy you! haha nice man! that shit! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

February 24th, 2010, 08:56 PM	#3
UnixHH MM Fanatic 2003 Saleen S281 Join Date: Nov 2008 Location: Houston, Tx Posts: 4,274 iTrader: 0 reviews	haha good shit man. im sitting here looking at the same shit you have.. except im looking online haha.. __________________ 480RWHP 450RWTQ 15psi @ 15* on 91 octane

February 24th, 2010, 08:57 PM	#4
UnixHH MM Fanatic 2003 Saleen S281 Join Date: Nov 2008 Location: Houston, Tx Posts: 4,274 iTrader: 0 reviews	specs on the goods man __________________ 480RWHP 450RWTQ 15psi @ 15* on 91 octane

February 24th, 2010, 09:02 PM	#5
Willy Mo MM Fanatic 2002 Mustang GT Join Date: Sep 2008 Location: MO Posts: 4,368 Blog Entries: 1 iTrader: 2 reviews	damn thats pretty.. I would take a pic of it all and put it on my wall.. __________________

February 24th, 2010, 09:05 PM	#6
UnixHH MM Fanatic 2003 Saleen S281 Join Date: Nov 2008 Location: Houston, Tx Posts: 4,274 iTrader: 0 reviews	id sleep in the box hugging the crank and kissing the pistons.... __________________ 480RWHP 450RWTQ 15psi @ 15* on 91 octane

February 24th, 2010, 09:12 PM	#7
mustang_gtr_99 Hardcore Enthusiast 1999 3V GT/2007 GT D/D corner carver Join Date: Feb 2009 Location: Eugene, Oregon Posts: 2,730 iTrader: 2 reviews	Forged MMR 900 balanced with 9.5:1 comp. Also have ARP mains and head studs. Have a bone to pick with them about the mains though. They sent me a 2bolt main set and the 05+ block uses 4 bolt mains. I need to confirm this but they told me today that ARP does not make a 4 bolt main kit for aluminum blocks so you use stock TTY bolts on the outer mains Total was $2,265 __________________ OS2 (SW) USN REAR SEAT DELETE FABRICATOR "RSD pics in garage" 99 3V GT/2007 GT DD

February 24th, 2010, 09:15 PM	#8
UnixHH MM Fanatic 2003 Saleen S281 Join Date: Nov 2008 Location: Houston, Tx Posts: 4,274 iTrader: 0 reviews	how much you pay for all that? __________________ 480RWHP 450RWTQ 15psi @ 15* on 91 octane

February 24th, 2010, 09:20 PM	#9
mustang_gtr_99 Hardcore Enthusiast 1999 3V GT/2007 GT D/D corner carver Join Date: Feb 2009 Location: Eugene, Oregon Posts: 2,730 iTrader: 2 reviews	look above Oh, correction, I got the MMR 800. Only diference was the rods were a little cheaper. __________________ OS2 (SW) USN REAR SEAT DELETE FABRICATOR "RSD pics in garage" 99 3V GT/2007 GT DD

February 24th, 2010, 09:29 PM	#10
mustang_gtr_99 Hardcore Enthusiast 1999 3V GT/2007 GT D/D corner carver Join Date: Feb 2009 Location: Eugene, Oregon Posts: 2,730 iTrader: 2 reviews	I still have some small odds and ends but I pretty much have everything for the 3V build __________________ OS2 (SW) USN REAR SEAT DELETE FABRICATOR "RSD pics in garage" 99 3V GT/2007 GT DD

February 24th, 2010, 09:30 PM	#11
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,793 Blog Entries: 1 iTrader: 3 reviews	not a bad price...my next blower is 3200 bucks! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

February 24th, 2010, 09:44 PM	#12
mustang_gtr_99 Hardcore Enthusiast 1999 3V GT/2007 GT D/D corner carver Join Date: Feb 2009 Location: Eugene, Oregon Posts: 2,730 iTrader: 2 reviews	SHOOT, mine is 6,000 __________________ OS2 (SW) USN REAR SEAT DELETE FABRICATOR "RSD pics in garage" 99 3V GT/2007 GT DD

February 24th, 2010, 09:48 PM	#13
Lefty Resident DJ '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 28,699 iTrader: 12 reviews	Holy shit it's Unix __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

February 24th, 2010, 10:00 PM	#14
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	Cool man, waiting for heads myself, I love getting new parts __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

February 24th, 2010, 10:09 PM	#16
mustang_gtr_99 Hardcore Enthusiast 1999 3V GT/2007 GT D/D corner carver Join Date: Feb 2009 Location: Eugene, Oregon Posts: 2,730 iTrader: 2 reviews	Lefty, you should know this off the top of your head. Does ARP make a 4 bolt main stud kit? I think MMR is giving me the run around for there F up __________________ OS2 (SW) USN REAR SEAT DELETE FABRICATOR "RSD pics in garage" 99 3V GT/2007 GT DD

February 24th, 2010, 11:20 PM	#17
F8L GT !FACEPLATED! 2002 Mustang GT 7.84 @ 86.01 Join Date: Jul 2008 Location: Upper Michigan Posts: 12,917 iTrader: 13 reviews	your putting head studs in also correct? EDIT: just saw that you are __________________ MM Bracket Racing Crew Co-Founder ~Its a Drag Car, Not a Show Car~ LINK-->Custom Race Transmission Build<--LINK

February 24th, 2010, 11:33 PM	#19
330CubeGt MM Fanatic 1997 SVT COBRA 1996 Mustang V6 Join Date: Dec 2007 Location: Orlando Posts: 4,880 iTrader: 14 reviews	Nice... __________________ -04 IRS - Magnaflow - Wheel Replica - Autometer - FTBR - FRPP - SCT - Brembo - PRO 5.0 - BOI-

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

February 24th, 2010, 11:31 PM	#18
naza Enthusiast 00 gt Join Date: Jan 2010 Location: Memphis, TN Posts: 807 iTrader: 1 reviews	niiiice brooooooo!!

February 24th, 2010, 11:44 PM	#20
mustang_gtr_99 Hardcore Enthusiast 1999 3V GT/2007 GT D/D corner carver Join Date: Feb 2009 Location: Eugene, Oregon Posts: 2,730 iTrader: 2 reviews	thanks, long time in the making. __________________ OS2 (SW) USN REAR SEAT DELETE FABRICATOR "RSD pics in garage" 99 3V GT/2007 GT DD

Threads Similar to: hellz yah, parts in
Thread	Thread Starter	Forum	Replies	Last Post
hellz yes	GreenFaleen	The Clubhouse	33	January 29th, 2010 03:04 PM
Oh Yah Got Me New Shoes	01brknGT	99-04	37	July 3rd, 2009 03:35 AM
Yah so	TheUNZippee!	The Clubhouse	47	January 12th, 2009 04:55 PM
HAI-YAH fail	Squints	The Clubhouse	9	December 26th, 2008 03:07 PM

All times are GMT -4. The time now is 01:49 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.