Sending it away again tomorrow!

Scott2001GT · March 16th, 2010, 11:04 PM

Sending it to the Tuning shop tomorrow! The stall, shift kit, and trans cooler got done tonight(needed extra cooling hose). It is going to be so fun! It was stalling at 1500rpms to move haha! Was goin up hill tho.

Anywho...they shop is going to check it all over and such. Some pipe needs to go up, fog light needs to be grinded down, the filler neck needs to be looked at. I was filling the gas tank up and it started pouring out where the filler neck goes into the tank...I pushed it in more when I un-did the neck where the gas cap was. But idk what I am looking for b/c I didn't look at in before hand.

But goin down Friday for the tune I hope!!

Hoping for some good numbers through the stalled AUTO!

99mustanggtman · March 16th, 2010, 11:31 PM

Awesome man! What numbers are you shooting for?

Scott2001GT · March 16th, 2010, 11:32 PM

umm idk honestly...I have seen a top of different numbers out there....Yo's are welcome to guess

99mustanggtman · March 16th, 2010, 11:34 PM

What are the mods?

Scott2001GT · March 16th, 2010, 11:36 PM

P1sc with 3.4 pulley, 3 core intercooler, SCT BA 2600MAF, BBK 78mm t/b combo, Edge Pro Series 3.5k stall, Fairbanks shift kit, 4:10s, SCT x3

Scott2001GT · March 16th, 2010, 11:38 PM

oh and GT supercar pump and 20amp BAP

99mustanggtman · March 16th, 2010, 11:41 PM

I'm not familiar with procharger pulley sizes at all lol. I'm gonna guess somewhere in the 370rwhp range

Scott2001GT · March 16th, 2010, 11:42 PM

hope for 10 to 11 psi

Shaun03GT · March 16th, 2010, 11:49 PM

Nice man congrats! I hope it all works out for ya. Cant wait to see some numbers

Scott2001GT · March 16th, 2010, 11:50 PM

me either! I like having the auto b/c it will show a different side of a Boosted Stang!

Scott2001GT · March 16th, 2010, 11:53 PM

i hope my grommet isn't bad on my fuel tank

Roush00 · March 16th, 2010, 11:54 PM

Best of luck! Glad to see you got it together. Make sure you get that dyno video..

Scott2001GT · March 16th, 2010, 11:55 PM

Oh I will have lots if vids and pics!

Scott2001GT · March 16th, 2010, 11:59 PM

anyone know about the filler neck?

Mach Boy · March 17th, 2010, 12:14 AM

Filler necks are prone to falling apart on the 99-04s. I had to replace mine and my dad's g/f had to replace hers on her V6 vert.

Scott2001GT · March 17th, 2010, 12:15 AM

yeah it just started after pulling the tank so I think is just came out and I hope it went back in....ahh I hope!

99mustanggtman · March 17th, 2010, 12:20 AM

Yeah that damn seal broke on mine too. Easy fix though

Scott2001GT · March 17th, 2010, 12:23 AM

well it will be at the shop tomorrow so they would have to fix it..I cant trailer it back anymore!

Scott2001GT · March 17th, 2010, 07:19 PM

Well she is at the shop guys! Gave them a list of things to look at then I hope to get in tuned Friday!

BakerFX4 · March 17th, 2010, 07:23 PM

shaun's filler neck just gave him problems too. Did i mention mine is leaking too! F the filler neck!

March 16th, 2010, 11:04 PM	#1
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	Sending it away again tomorrow! Sending it to the Tuning shop tomorrow! The stall, shift kit, and trans cooler got done tonight(needed extra cooling hose). It is going to be so fun! It was stalling at 1500rpms to move haha! Was goin up hill tho. Anywho...they shop is going to check it all over and such. Some pipe needs to go up, fog light needs to be grinded down, the filler neck needs to be looked at. I was filling the gas tank up and it started pouring out where the filler neck goes into the tank...I pushed it in more when I un-did the neck where the gas cap was. But idk what I am looking for b/c I didn't look at in before hand. But goin down Friday for the tune I hope!! Hoping for some good numbers through the stalled AUTO! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 16th, 2010, 11:31 PM	#2
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	Awesome man! What numbers are you shooting for? __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

March 16th, 2010, 11:32 PM	#3
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	umm idk honestly...I have seen a top of different numbers out there....Yo's are welcome to guess __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 16th, 2010, 11:34 PM	#4
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	What are the mods? __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

March 16th, 2010, 11:36 PM	#5
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	P1sc with 3.4 pulley, 3 core intercooler, SCT BA 2600MAF, BBK 78mm t/b combo, Edge Pro Series 3.5k stall, Fairbanks shift kit, 4:10s, SCT x3 __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 16th, 2010, 11:38 PM	#6
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	oh and GT supercar pump and 20amp BAP __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 16th, 2010, 11:41 PM	#7
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	I'm not familiar with procharger pulley sizes at all lol. I'm gonna guess somewhere in the 370rwhp range __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

March 16th, 2010, 11:42 PM	#8
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	hope for 10 to 11 psi __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 16th, 2010, 11:49 PM	#9
Shaun03GT I Post Entirely Way Too Much 2003 Mustang GT 1/8 - 8.09 @ 91.39mph 1/4 - 12.35 @ 114.52mph Join Date: Sep 2009 Location: Weymouth, MA Posts: 12,064 iTrader: 11 reviews	Nice man congrats! I hope it all works out for ya. Cant wait to see some numbers __________________ 2003 Mustang GT Vortech V1 Intercooled SAE Corrected - 380rwhp & 380rwtq @ 9psi Uncorrected - 401rwhp & 400rwtq @ 9psi Tuned By: Pete @ Performance Dyno Affordable Supercharger Build Guide Supercharger Info for Noobs

March 16th, 2010, 11:50 PM	#10
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	me either! I like having the auto b/c it will show a different side of a Boosted Stang! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 16th, 2010, 11:53 PM	#11
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	i hope my grommet isn't bad on my fuel tank __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 16th, 2010, 11:54 PM	#12
Roush00 Regular 2000 Roush Stage II #2568 Join Date: Dec 2009 Location: Colorado Posts: 312 iTrader: 0 reviews	Best of luck! Glad to see you got it together. Make sure you get that dyno video.. __________________ 2000 Roush Stage II With Some Mods

March 16th, 2010, 11:55 PM	#13
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	Oh I will have lots if vids and pics! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 16th, 2010, 11:59 PM	#14
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	anyone know about the filler neck? __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 17th, 2010, 12:14 AM	#15
Mach Boy MM's Orangest 2004 Mach 1 Mustang Join Date: Sep 2007 Location: Indy Posts: 2,820 Blog Entries: 1 iTrader: 1 reviews	Filler necks are prone to falling apart on the 99-04s. I had to replace mine and my dad's g/f had to replace hers on her V6 vert. __________________ 360HP / 345TQ N/A

March 17th, 2010, 12:15 AM	#16
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	yeah it just started after pulling the tank so I think is just came out and I hope it went back in....ahh I hope! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 17th, 2010, 12:20 AM	#17
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	Yeah that damn seal broke on mine too. Easy fix though __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

March 17th, 2010, 12:23 AM	#18
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	well it will be at the shop tomorrow so they would have to fix it..I cant trailer it back anymore! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 17th, 2010, 07:19 PM	#19
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,628 Blog Entries: 1 iTrader: 3 reviews	Well she is at the shop guys! Gave them a list of things to look at then I hope to get in tuned Friday! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone 4V swap in the works

March 17th, 2010, 07:23 PM	#20
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 15,607 iTrader: 14 reviews	shaun's filler neck just gave him problems too. Did i mention mine is leaking too! F the filler neck! __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Sending it away again tomorrow!
Thread	Thread Starter	Forum	Replies	Last Post
Fuel Sending unit	Itkix	94-95	8	December 4th, 2009 02:01 PM
Sending someone to collections... anyone done it?	ReverendDexter	The Clubhouse	20	May 8th, 2009 02:57 AM
Sending Off heads	95blackbeauty	5.0 Mustangs	11	June 9th, 2008 01:36 AM
sending units	burnout5.0	94-95	2	June 4th, 2007 03:25 PM
O2 Sending wire	97TunedMustang	V6 Mustangs	1	January 19th, 2006 03:06 PM

All times are GMT -4. The time now is 07:13 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.