dyno tomorrow

yellow04GT · March 31st, 2010, 07:57 PM

Putting a 3.2 pulley on and new maf meter shotting for 450 rwhp on a stock motor. I kinda hope the damn thing blows up so I can start to take it apart. Still waiting for the new trickflow heads. they say by june 1st but I have heard rumor maybe a month sooner. I can't wait.

Scott2001GT · March 31st, 2010, 07:58 PM

tfs heads are out already...

Scott2001GT · March 31st, 2010, 08:00 PM

like 1899 or so...about 2k really. then gaskets and such

JTs03v6 · March 31st, 2010, 08:22 PM

Dont blow your motor man.

Good luck reaching your goals.

yellow04GT · March 31st, 2010, 08:33 PM

sorry I should have posted that I was waiting for the new cnc trickflow heads.They are mostly for FI cars. JT as far as blowing the thing up I dont think there is any worry,but if it did happen I could park it then strip it down and paint under my hood. (you know how poopie they look with the factory paint in the engine compartment) If it did come apart now I would not want to rush putting it back together.

pyschopath76 · March 31st, 2010, 08:51 PM

man good luck and post up them numbers when your done.

yellow04GT · March 31st, 2010, 09:06 PM

will do

ajm · March 31st, 2010, 09:10 PM

Hope it works out for you. if you dont mind can you post up some boost and hp #'s after?

yellow04GT · March 31st, 2010, 09:24 PM

sure will ajm

JTs03v6 · March 31st, 2010, 09:39 PM

I think a set of blower cams would do you more justice than aftermarket heads.
Definitlly in for some numbers.

btw...what is your current setup?? p1sc??

tboz65 · March 31st, 2010, 09:40 PM

good luck, waiting to hear some numbers

JTs03v6 · April 2nd, 2010, 12:39 PM

Any update??

yellow04GT · April 3rd, 2010, 08:49 AM

Sorry guys for taking so long but here it is.I was on the dyno and he was just finishing my base tune when I get a phone call. My grandmother was dying (she is 101 so its no shocker). Still I was 4 hours away and wanted to be there. So I had him wing the Meth tune and I left. But I had 3.2 pulley 12.52 lbs. of boost 14 degrees timing 432 rwhp and 399 rwtq on my no meth street tune. so maybe 450 on the meth we did not do another pull after the base tune (my fault not his).

Scott2001GT · April 3rd, 2010, 11:16 AM

nice bro!

B0B · April 3rd, 2010, 11:33 AM

good job man, nice numbers!

Willy Mo · April 3rd, 2010, 12:08 PM

very nice

mustanginky · April 3rd, 2010, 12:48 PM

nice #'s, sorry bout your grandmother.

01MGGT · April 3rd, 2010, 01:06 PM

Sorry about the family bro. What meth kit are you running? I really want to add one sometime!

BakerFX4 · April 3rd, 2010, 01:09 PM

nice numbers man and sorry bout the family issue! I have always enjoyed talking to older people to just find out what it was like to live in the "good ole' days". Always got plenty stories and they have been there to watch everything go from then to now. Everything was SOOOO different 100 years ago! But it will be all of us. One day ill be having to explain how the 90's were to my grandkids and so forth.

=90's

ajm · April 3rd, 2010, 03:19 PM

Looks like it went well. You running an intercooler? If so what brand?

March 31st, 2010, 07:57 PM	#1
yellow04GT Regular 2004 mustang GT 12.5 @115 Join Date: Feb 2008 Location: vermont Posts: 195 iTrader: 0 reviews	dyno tomorrow Putting a 3.2 pulley on and new maf meter shotting for 450 rwhp on a stock motor. I kinda hope the damn thing blows up so I can start to take it apart. Still waiting for the new trickflow heads. they say by june 1st but I have heard rumor maybe a month sooner. I can't wait.

March 31st, 2010, 07:58 PM	#2
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,793 Blog Entries: 1 iTrader: 3 reviews	tfs heads are out already... __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

March 31st, 2010, 08:00 PM	#3
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,793 Blog Entries: 1 iTrader: 3 reviews	like 1899 or so...about 2k really. then gaskets and such __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

March 31st, 2010, 08:22 PM	#4
JTs03v6 Hardcore Enthusiast 2003 mustang 7.48x1.56=11.67 Join Date: Sep 2009 Location: East Coast Posts: 2,318 iTrader: 0 reviews	Dont blow your motor man. Good luck reaching your goals. __________________ New combo: Forged SC short Block,280cfm heads, Precision 6262 turbo, cx 31x12x3 fmic http://photobucket.com/JTsTurboBuild http://youtube.com/user/JTsStang

March 31st, 2010, 08:51 PM	#6
pyschopath76 Enthusiast 2004 Mustang GT slow as sin.... Join Date: Aug 2009 Location: Norfolk, VA Posts: 977 iTrader: 0 reviews	man good luck and post up them numbers when your done. __________________ JLT Ram Air Intake/Accufab 70mm Throttle Body & Upper Plenum/SLP Longtube Headers/SLP Catted X-pipe/SLP LM1/4.10 gears Military Crew - AZ2(AW) Black Stang Member #6

March 31st, 2010, 08:33 PM	#5
yellow04GT Regular 2004 mustang GT 12.5 @115 Join Date: Feb 2008 Location: vermont Posts: 195 iTrader: 0 reviews	sorry I should have posted that I was waiting for the new cnc trickflow heads.They are mostly for FI cars. JT as far as blowing the thing up I dont think there is any worry,but if it did happen I could park it then strip it down and paint under my hood. (you know how poopie they look with the factory paint in the engine compartment) If it did come apart now I would not want to rush putting it back together.

March 31st, 2010, 09:06 PM	#7
yellow04GT Regular 2004 mustang GT 12.5 @115 Join Date: Feb 2008 Location: vermont Posts: 195 iTrader: 0 reviews	will do

March 31st, 2010, 09:10 PM	#8
ajm Banned Join Date: May 2008 Posts: 7,966 iTrader: 4 reviews	Hope it works out for you. if you dont mind can you post up some boost and hp #'s after?

March 31st, 2010, 09:24 PM	#9
yellow04GT Regular 2004 mustang GT 12.5 @115 Join Date: Feb 2008 Location: vermont Posts: 195 iTrader: 0 reviews	sure will ajm

March 31st, 2010, 09:39 PM	#10
JTs03v6 Hardcore Enthusiast 2003 mustang 7.48x1.56=11.67 Join Date: Sep 2009 Location: East Coast Posts: 2,318 iTrader: 0 reviews	I think a set of blower cams would do you more justice than aftermarket heads. Definitlly in for some numbers. btw...what is your current setup?? p1sc?? __________________ New combo: Forged SC short Block,280cfm heads, Precision 6262 turbo, cx 31x12x3 fmic http://photobucket.com/JTsTurboBuild http://youtube.com/user/JTsStang

March 31st, 2010, 09:40 PM	#11
tboz65 Regular 2001 GT, 1965 coupe Join Date: Mar 2010 Location: Troy IL Posts: 115 iTrader: 0 reviews	good luck, waiting to hear some numbers

April 2nd, 2010, 12:39 PM	#12
JTs03v6 Hardcore Enthusiast 2003 mustang 7.48x1.56=11.67 Join Date: Sep 2009 Location: East Coast Posts: 2,318 iTrader: 0 reviews	Any update?? __________________ New combo: Forged SC short Block,280cfm heads, Precision 6262 turbo, cx 31x12x3 fmic http://photobucket.com/JTsTurboBuild http://youtube.com/user/JTsStang

April 3rd, 2010, 08:49 AM	#13
yellow04GT Regular 2004 mustang GT 12.5 @115 Join Date: Feb 2008 Location: vermont Posts: 195 iTrader: 0 reviews	Sorry guys for taking so long but here it is.I was on the dyno and he was just finishing my base tune when I get a phone call. My grandmother was dying (she is 101 so its no shocker). Still I was 4 hours away and wanted to be there. So I had him wing the Meth tune and I left. But I had 3.2 pulley 12.52 lbs. of boost 14 degrees timing 432 rwhp and 399 rwtq on my no meth street tune. so maybe 450 on the meth we did not do another pull after the base tune (my fault not his).

April 3rd, 2010, 11:16 AM	#14
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,793 Blog Entries: 1 iTrader: 3 reviews	nice bro! __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

April 3rd, 2010, 11:33 AM	#15
B0B Boost gets you laid 2001 Mustang GT 12.93@113.7 (on the 18's) Join Date: Dec 2006 Location: Milton, WA Posts: 2,609 iTrader: 2 reviews	good job man, nice numbers! __________________ '01 GT. Just a couple Bolt-ons. 0rwhp 0rwtq. Epic Turbo build in progress 2003 Rubicon (wheelin rig) 2008 Silverado 4x4 (towin rig/road queen) 2009 KTM 450 XC-W (Brap Brap!)

April 3rd, 2010, 12:48 PM	#17
mustanginky MM Fanatic 2000 gt Join Date: Feb 2009 Location: La grange, KY Posts: 4,259 iTrader: 2 reviews	nice #'s, sorry bout your grandmother. __________________ Procharged 2000 5 Speed BAB GT, built motor, blower cams, speedy dyno tune 412 hp, 450 rw tq HARDCORE CREW BRIGHT ATLANTIC BLUE CREW #1 MEMBER

April 3rd, 2010, 01:06 PM	#18
01MGGT Hardcore Enthusiast Join Date: Oct 2009 Location: Alamogordo NM Holloman AFB Posts: 1,200 iTrader: 0 reviews	Sorry about the family bro. What meth kit are you running? I really want to add one sometime! __________________ 375hp 380tq Vortech v1 7.5 psi CMS stg1 Cams 75mm TB/Plenum Flows O/R X AFM MrFreeze Meth Steeda Springs Sniper vids http://www.youtube.com/user/01mggt Mineral Grey Club member #14 Military Crew E-4 Predator Crew Chief Holloman

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

April 3rd, 2010, 12:08 PM	#16
Willy Mo MM Fanatic 2002 Mustang GT Join Date: Sep 2008 Location: MO Posts: 4,368 Blog Entries: 1 iTrader: 2 reviews	very nice __________________

April 3rd, 2010, 01:09 PM	#19
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 16,250 iTrader: 14 reviews	nice numbers man and sorry bout the family issue! I have always enjoyed talking to older people to just find out what it was like to live in the "good ole' days". Always got plenty stories and they have been there to watch everything go from then to now. Everything was SOOOO different 100 years ago! But it will be all of us. One day ill be having to explain how the 90's were to my grandkids and so forth. =90's __________________ 4.75 MMR 900se Livernois ported heads HP 292s blower cams Procharger D1sc at 20+ psi IW 15% OD pulley (and more bolt ons) E85 Tune/numbers coming shortly!! Last edited by BakerFX4; April 3rd, 2010 at 01:11 PM.

April 3rd, 2010, 03:19 PM	#20
ajm Banned Join Date: May 2008 Posts: 7,966 iTrader: 4 reviews	Looks like it went well. You running an intercooler? If so what brand?

Threads Similar to: dyno tomorrow
Thread	Thread Starter	Forum	Replies	Last Post
Dyno Tomorrow!	Shaun03GT	99-04	17	March 20th, 2010 03:08 PM
dyno tomorrow	Yur2slo	2005 - 2010	6	January 5th, 2010 03:16 PM
Dyno tomorrow	bandity2k00	99-04	184	December 10th, 2009 12:32 AM
dyno tomorrow	fastregalwe2	2005 - 2010	28	May 30th, 2009 09:45 AM
dyno tuning tomorrow, wish me luck	White99stang	99-04	10	March 13th, 2007 11:46 PM

All times are GMT -4. The time now is 11:27 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.