More Power

GoGetta · April 12th, 2010, 06:10 PM

What up fellas, I'm back again. I order my engine while i was at work and some 262 comp. cams. Once I start braking my car down, I'm going to send my heads off to be ported. I have exuast(Magnaflow x-pipe & Flowmaster mufflers) except for headers which is coming soon, programmer, K&N CAI, 3.55 gears, Moser axels, King Cobra clutch, ford racing aluminum drive shaft, plus the things I mentioned at the beginning of this paragraph, roughly how much horse power will I have and what else would I need to buy. Thanks in advance.

rudscuba · April 12th, 2010, 06:40 PM

I am currently doing some things to a 2003 Mach1, I have the full Xpipe MagnaFlow on order, a CAI that keeps the shaker in play, weapon x coils and plugs with a gaurantee they will add in HP or money back, 62mm (twin) BBK throttle body. Then to a shop for a Dyno tune and a programmer of there choice, hope to see 400 ponies.

sl04gt · April 12th, 2010, 07:20 PM

plenum, throttle body, pulleys with those mods should be in the 290ish to 300 hp range with a set of longtubes(MAC)

GoGetta · April 12th, 2010, 08:26 PM

Ok cool, so the only thing that will get me to atleast 400 horses is a supercharger.

Blackbird1084 · April 13th, 2010, 02:46 AM

Or super high compression(13:1 or more) with a tfs heads and cams setup. But that's probably gonna cost more then a pieced together vortech kit so yes a supercharger would be the easiest route.

zigbigadoru · April 13th, 2010, 04:54 AM

Originally Posted by rudscuba

I am currently doing some things to a 2003 Mach1, I have the full Xpipe MagnaFlow on order, a CAI that keeps the shaker in play, weapon x coils and plugs with a gaurantee they will add in HP or money back, 62mm (twin) BBK throttle body. Then to a shop for a Dyno tune and a programmer of there choice, hope to see 400 ponies.

no....just no

slow02gt · April 13th, 2010, 08:18 AM

Originally Posted by rudscuba

I am currently doing some things to a 2003 Mach1, I have the full Xpipe MagnaFlow on order, a CAI that keeps the shaker in play, weapon x coils and plugs with a gaurantee they will add in HP or money back, 62mm (twin) BBK throttle body. Then to a shop for a Dyno tune and a programmer of there choice, hope to see 400 ponies.

sorry your not going to see 400 horses.. probably around 315 or so mr weapon x coils lol

GoGetta · April 13th, 2010, 09:37 AM

Ok supercharger it is. Does anyone know where I can get a pretty good but cheap supercharger.

Scott2001GT · April 13th, 2010, 11:44 AM

superchargersonline.com

April 12th, 2010, 06:10 PM	#1
GoGetta Newbie Join Date: Oct 2007 Posts: 31 iTrader: 0 reviews	More Power What up fellas, I'm back again. I order my engine while i was at work and some 262 comp. cams. Once I start braking my car down, I'm going to send my heads off to be ported. I have exuast(Magnaflow x-pipe & Flowmaster mufflers) except for headers which is coming soon, programmer, K&N CAI, 3.55 gears, Moser axels, King Cobra clutch, ford racing aluminum drive shaft, plus the things I mentioned at the beginning of this paragraph, roughly how much horse power will I have and what else would I need to buy. Thanks in advance.

April 12th, 2010, 07:20 PM	#3
sl04gt Regular 2004 Mustang Gt 13.17@106.7 1.8 60ft Join Date: Jan 2010 Location: AL Posts: 341 iTrader: 0 reviews	plenum, throttle body, pulleys with those mods should be in the 290ish to 300 hp range with a set of longtubes(MAC) __________________ CRAZY HORSE RACING couple of bolt-ons and bolt-offs

April 13th, 2010, 02:46 AM	#5
Blackbird1084 Hardcore Enthusiast Join Date: Feb 2007 Posts: 1,381 iTrader: 1 reviews	Or super high compression(13:1 or more) with a tfs heads and cams setup. But that's probably gonna cost more then a pieced together vortech kit so yes a supercharger would be the easiest route. __________________ 79 Buick regal 13.70 @102 350 sbc 97 Trans Am WS6 11.94 @112.26 1.603 60ft @Kcir 04 SRT-4 13.42@113.55 2.37 60ft 04 Mustang GT 12.19 @111.88 347hp 432tq 100 shot 06 Mustang GT 12.2929@114.30 2.01 60ft MM Bracket Racing Crew Member #4

April 13th, 2010, 11:44 AM	#9
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,793 Blog Entries: 1 iTrader: 3 reviews	superchargersonline.com __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

Threads Similar to: More Power
Thread	Thread Starter	Forum	Replies	Last Post
need help!! need more power!	tommyboy2008	Modular Mustangs	4	January 2nd, 2010 09:51 PM
n/a power	blackbullitt08	2005 - 2010	20	November 22nd, 2008 06:34 PM
More Power?	patwrecked	5.0 Mustangs	2	November 13th, 2007 08:11 AM
more power	burin_rubber	V6 Mustangs	14	February 22nd, 2007 08:01 PM
More Power!	tommyboy	2005 - 2010	2	February 20th, 2007 06:08 PM

April 12th, 2010, 06:40 PM	#2
rudscuba Newbie 2003 Mach 1 & 2003GT Conv Join Date: Apr 2010 Location: Edmonton, Canada Posts: 5 iTrader: 0 reviews	I am currently doing some things to a 2003 Mach1, I have the full Xpipe MagnaFlow on order, a CAI that keeps the shaker in play, weapon x coils and plugs with a gaurantee they will add in HP or money back, 62mm (twin) BBK throttle body. Then to a shop for a Dyno tune and a programmer of there choice, hope to see 400 ponies.

April 12th, 2010, 08:26 PM	#4
GoGetta Newbie Join Date: Oct 2007 Posts: 31 iTrader: 0 reviews	Ok cool, so the only thing that will get me to atleast 400 horses is a supercharger.

April 13th, 2010, 09:37 AM	#8
GoGetta Newbie Join Date: Oct 2007 Posts: 31 iTrader: 0 reviews	Ok supercharger it is. Does anyone know where I can get a pretty good but cheap supercharger.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 12:16 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.