Install of a Mach 1 chin spoiler on 04 GT

cedsks · November 12th, 2010, 01:11 AM

Hey guys thanks for the poll on leaving it black, Deff with 80+% saying it will look better that way..

I have decided that I want installed with it mounted back to be flush with the wheel well, my question is, when I install this piece, with this interfere with any overheating issues, like the stock small black wind director (I know from experience that with out that directing air cars will overheat) do I leave that there, lower it, leave it be. Basicly will putting on this mach 1 chin spoiler interfere with that at all?

TheWop · November 12th, 2010, 08:05 AM

Not that i know of or ever heard of. I put mine on it seems to be the exact same. If you have any ricer buddies..theyll say itll go even faster haha

MT0911 · November 12th, 2010, 08:12 AM

There should be no issues with overheating whatsoever. Once installed, enjoy it and have no worries.

4.6DreameR · November 12th, 2010, 08:52 AM

It will not mess with anything that would cause you to overheat. Just watch out for curbs and parking barriers.

pumm3l · November 12th, 2010, 09:17 AM

you don't have to opt for the front or wheel well flush, you can have both!

Most people don't go through the hassle or maybe they don't know but you can install it so it's flush at the wheel wells and front. It's not easy but if you mount the 2 ends first flush with the wheel wells and then mount the center you can continue around the rest pulling nice and hard and it'll be flush with the front as well. After I installed my 03-04 cobra bumper I gave my buddy my old mach1 chin spoiler and told him to try it out and he was able to get it flush with both.

Here's a couple pictures of it installed on his 04 GT:

2K4POINT6 · November 12th, 2010, 09:52 AM

just watch those parking blocks, or you will only enjoy it for a short time.

November 12th, 2010, 01:11 AM	#1
cedsks Premium Member 2004 Mustang GT Join Date: Apr 2010 Location: Dayton Ohio area Posts: 669 iTrader: 0 reviews	Install of a Mach 1 chin spoiler on 04 GT Hey guys thanks for the poll on leaving it black, Deff with 80+% saying it will look better that way.. I have decided that I want installed with it mounted back to be flush with the wheel well, my question is, when I install this piece, with this interfere with any overheating issues, like the stock small black wind director (I know from experience that with out that directing air cars will overheat) do I leave that there, lower it, leave it be. Basicly will putting on this mach 1 chin spoiler interfere with that at all? __________________ 2004 2v GT--3.90's, t3650, H&R SS, 78mm TB, K&N CAI, steeda bump stop kit, HP Blues shocks and struts, soon to have a rear seat delete, light weight driveshaft.

November 12th, 2010, 08:05 AM	#2
TheWop Regular 2002 Mustang GT Join Date: Jun 2010 Posts: 259 iTrader: 0 reviews	Not that i know of or ever heard of. I put mine on it seems to be the exact same. If you have any ricer buddies..theyll say itll go even faster haha __________________ 2002 Mustang GT 4.10 Gears--Borla Cat-Back--Mac O/R H--SCT X3/SF3 Tuner--Bama Tunes--UPR Clutch Quadrant/Fiore Firewall Adjuster

November 12th, 2010, 08:12 AM	#3
MT0911 Hardcore Enthusiast 99' Vette, 02' Mustang GT Join Date: Nov 2010 Location: MD Posts: 1,335 iTrader: 8 reviews	There should be no issues with overheating whatsoever. Once installed, enjoy it and have no worries. __________________ '99 SVT Cobra - 283 C.I. WAP Forged Block, HP Custom Blower Cams, Novi 2000rr (8-Rib) + 20 psi, RPM T-56, SRA Swap '99 C5 Corvette FRC - H/C/I/E + Suspension '02 Mustang GT - Exhaust, 4.10's, Suspension SOLD

November 12th, 2010, 09:17 AM	#5
pumm3l Regular 1999 Mustang GT 12.09@117.87 Join Date: Sep 2007 Location: Pottstown, PA Posts: 244 iTrader: 0 reviews	you don't have to opt for the front or wheel well flush, you can have both! Most people don't go through the hassle or maybe they don't know but you can install it so it's flush at the wheel wells and front. It's not easy but if you mount the 2 ends first flush with the wheel wells and then mount the center you can continue around the rest pulling nice and hard and it'll be flush with the front as well. After I installed my 03-04 cobra bumper I gave my buddy my old mach1 chin spoiler and told him to try it out and he was able to get it flush with both. Here's a couple pictures of it installed on his 04 GT: __________________ 99 GT - 462 rwhp / 405 rwtq L&M Engines tuned - SStang.com Last edited by pumm3l; November 12th, 2010 at 09:56 AM.

Threads Similar to: Install of a Mach 1 chin spoiler on 04 GT
Thread	Thread Starter	Forum	Replies	Last Post
Mach 1 chin spoiler	Gt98	4V / SVT	3	September 21st, 2010 11:25 PM
Mach 1 Chin Spoiler	BlackedOut04GT	99-04	71	March 17th, 2010 07:58 AM
Mach 1 Chin Spoiler...	trueblue02GT	99-04	54	January 15th, 2009 12:38 AM
Mach 1 Chin Spoiler	04AnniversaryGT	99-04	11	December 14th, 2006 05:06 AM

November 12th, 2010, 09:52 AM	#6
2K4POINT6 Regular 2000 MUSTANG GT Join Date: Aug 2010 Location: GULFPORT, MS Posts: 102 iTrader: 0 reviews	just watch those parking blocks, or you will only enjoy it for a short time.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 11:16 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.