post up dyno sheet of a kb 2.1L please

sharkbait · November 16th, 2010, 09:54 PM

Heres an old dyno sheet with my NPI 4.6 with an auto.

Green line is the centri
Red line is the M112

Yes its depressing.

Notice how i had torque ALL of the time

BakerFX4 · November 16th, 2010, 09:56 PM

dude... go ahead and tell us about that 20 dollar centri. LMAO

BakerFX4 · November 16th, 2010, 09:57 PM

i dont think i would have even posted that sheet shark!!! lol

stal94gt · November 16th, 2010, 09:57 PM

if your talking about the green line being centri i have never seen a centri with that kind of power curve. it looks more like an n/a car.

WhiteVenom · November 16th, 2010, 09:57 PM

Yeah the whine is hard to resist trust me i know, I boosted 20 psi in this for a year

YouTube - Cobalt SS/SC Blower whine 2.5 pulley

sharkbait · November 16th, 2010, 09:58 PM

Try working with a npi motor

its depressing
There pretty much a waste of time

BakerFX4 · November 16th, 2010, 09:58 PM

shark... tell everyone what centri that was. That shouldnt even count.

sharkbait · November 16th, 2010, 09:59 PM

Definitally not a powerdyne...thats for sure

Baker, i went to the big cruise event down in Ocean City this past summer. I saw a 96 GT with a powerdyne on it.. i looked and was like I feel bad for him.

But in all fairness. I ran a 13.6 with that setup

thereal2v2fear · November 16th, 2010, 10:00 PM

if you ask me a root cost way to much to put on a 2v, when you can just part togther a centri blower like mine and still make 421hp/417trq. and thats the only reason i bought a centri was because it was cheap.

sharkbait · November 16th, 2010, 10:01 PM

Iv never spent more then 1500 on any of the my setups.

This one im working on now might just go a little above that. But its all good.

BakerFX4 · November 16th, 2010, 10:01 PM

I wouldnt have wasted my time mounting that powerdyne on my car!

sharkbait · November 16th, 2010, 10:02 PM

It definitally gave my little car a little more go.

Just not enough. I did pulley it at one point to push 8psi.
Then i broke the internal belt and blew it to peices.

BakerFX4 · November 16th, 2010, 10:03 PM

lol... you were asking way to much out of it. lol

thereal2v2fear · November 16th, 2010, 10:04 PM

Originally Posted by sharkbait

Iv never spent more then 1500 on any of the my setups.

This one im working on now might just go a little above that. But its all good.

really? i only spent 1,800 on my used kit. used parts ftw.

Scott2001GT · November 16th, 2010, 10:04 PM

Originally Posted by BakerFX4

exactly what stal said! Centris love those high rpms where most people are when they are racing.

Can I be that guy?

Ever see a Turbos top end?

sharkbait · November 16th, 2010, 10:04 PM

Poor little fella.

Iv installed a vortech on my buddies fox and i must say they are a blast
but im more of a roots kinda guy

BakerFX4 · November 16th, 2010, 10:05 PM

did you see turbo in the thread title? Ok then!

:

sharkbait · November 16th, 2010, 10:05 PM

Originally Posted by thereal2v2fear

really? i only spent 1,800 on my used kit. used parts ftw.

My last blower setup costed under 1500 tuned

Jobra · November 16th, 2010, 10:06 PM

I wish I ported my blower, I'd see 520-530 on only ~14 psi. Not bad for a "Heaton"

sharkbait · November 16th, 2010, 10:07 PM

Yea im hoping for 400+hp and 450-475 torque on my next setup. Cant wait

November 16th, 2010, 09:54 PM	#41
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	Heres an old dyno sheet with my NPI 4.6 with an auto. Green line is the centri Red line is the M112 Yes its depressing. Notice how i had torque ALL of the time __________________ 410rwhp 520rwtq @ 12.9 psi

November 16th, 2010, 09:56 PM	#42
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 16,250 iTrader: 14 reviews	dude... go ahead and tell us about that 20 dollar centri. LMAO __________________ 4.75 MMR 900se Livernois ported heads HP 292s blower cams Procharger D1sc at 20+ psi IW 15% OD pulley (and more bolt ons) E85 Tune/numbers coming shortly!!

November 16th, 2010, 09:57 PM	#43
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 16,250 iTrader: 14 reviews	i dont think i would have even posted that sheet shark!!! lol __________________ 4.75 MMR 900se Livernois ported heads HP 292s blower cams Procharger D1sc at 20+ psi IW 15% OD pulley (and more bolt ons) E85 Tune/numbers coming shortly!!

November 16th, 2010, 09:58 PM	#46
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	Try working with a npi motor its depressing There pretty much a waste of time __________________ 410rwhp 520rwtq @ 12.9 psi

November 16th, 2010, 09:58 PM	#47
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 16,250 iTrader: 14 reviews	shark... tell everyone what centri that was. That shouldnt even count. __________________ 4.75 MMR 900se Livernois ported heads HP 292s blower cams Procharger D1sc at 20+ psi IW 15% OD pulley (and more bolt ons) E85 Tune/numbers coming shortly!!

November 16th, 2010, 09:57 PM	#44
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	if your talking about the green line being centri i have never seen a centri with that kind of power curve. it looks more like an n/a car.

November 16th, 2010, 09:59 PM	#48
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	Definitally not a powerdyne...thats for sure Baker, i went to the big cruise event down in Ocean City this past summer. I saw a 96 GT with a powerdyne on it.. i looked and was like I feel bad for him. But in all fairness. I ran a 13.6 with that setup __________________ 410rwhp 520rwtq @ 12.9 psi

November 16th, 2010, 10:00 PM	#49
thereal2v2fear Enthusiast 2002 11.6@118 Join Date: Oct 2010 Location: Saginaw, MI Posts: 540 iTrader: 0 reviews	if you ask me a root cost way to much to put on a 2v, when you can just part togther a centri blower like mine and still make 421hp/417trq. and thats the only reason i bought a centri was because it was cheap. __________________ 02' Mustang\|MMR 4.75L 1000se\|Vortech\|pump gas\|566rwph/511rwtrq.

November 16th, 2010, 10:01 PM	#50
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	Iv never spent more then 1500 on any of the my setups. This one im working on now might just go a little above that. But its all good. __________________ 410rwhp 520rwtq @ 12.9 psi

November 16th, 2010, 10:02 PM	#52
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	It definitally gave my little car a little more go. Just not enough. I did pulley it at one point to push 8psi. Then i broke the internal belt and blew it to peices. __________________ 410rwhp 520rwtq @ 12.9 psi

November 16th, 2010, 10:03 PM	#53
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 16,250 iTrader: 14 reviews	lol... you were asking way to much out of it. lol __________________ 4.75 MMR 900se Livernois ported heads HP 292s blower cams Procharger D1sc at 20+ psi IW 15% OD pulley (and more bolt ons) E85 Tune/numbers coming shortly!!

November 16th, 2010, 10:04 PM	#56
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	Poor little fella. Iv installed a vortech on my buddies fox and i must say they are a blast but im more of a roots kinda guy __________________ 410rwhp 520rwtq @ 12.9 psi

November 16th, 2010, 10:05 PM	#57
BakerFX4 I Post Entirely Way Too Much Join Date: Dec 2007 Location: Louisiana Posts: 16,250 iTrader: 14 reviews	did you see turbo in the thread title? Ok then! : __________________ 4.75 MMR 900se Livernois ported heads HP 292s blower cams Procharger D1sc at 20+ psi IW 15% OD pulley (and more bolt ons) E85 Tune/numbers coming shortly!!

November 16th, 2010, 10:06 PM	#59
Jobra Hardcore Enthusiast 2004 Cobra 7.4@97 Eaton Join Date: Jan 2009 Posts: 2,124 iTrader: 1 reviews	I wish I ported my blower, I'd see 520-530 on only ~14 psi. Not bad for a "Heaton" __________________ NEW NUMBERS: 609/543

November 16th, 2010, 10:07 PM	#60
sharkbait Hooo Ha Ha 1997 Mustang GT 11.65 @ 115 Join Date: Apr 2009 Location: Pasadena MD Posts: 9,743 iTrader: 10 reviews	Yea im hoping for 400+hp and 450-475 torque on my next setup. Cant wait __________________ 410rwhp 520rwtq @ 12.9 psi

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: post up dyno sheet of a kb 2.1L please
Thread	Thread Starter	Forum	Replies	Last Post
Got the Dyno Sheet today.	Poppajac	96-98	8	December 24th, 2009 09:00 AM
Here is the dyno sheet..WTF...HELP	95project	5.0 Mustangs	68	September 28th, 2009 04:30 PM
Procharger Dyno Sheet	Schraders	99-04	44	February 8th, 2008 08:01 PM
My dyno sheet.	J Mac0123	99-04	18	September 17th, 2007 05:51 PM
Here's my new Dyno Sheet.	04GTAMPA	General Tech	75	July 10th, 2007 04:05 PM

All times are GMT -4. The time now is 11:17 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.