[codycat91]

I just wanted to shed some light on those of you who want white face gauges but don't want the cheesy look of the reverse glow ones from Am, etc... Whitegauges.net offers factory looking gauges but in white. I put them on my crown vic (sold) and was so pleased I ordered them for my mustang. They just came in and I'll put pics up once I pu them on but for the time being, heres some pics of the ones from my crown vic...

[braupe]

What do they look like at night?

[codycat91]

Originally Posted by braupe What do they look like at night?

They were kinda dim because of the dull greenish light on white so If you do this, i would put in leds. When I do my swap on the mustang, I am replacing the green film with blue film and putting in white leds. It will be much brighter and blue

[DEFIANT]

I had white face gauge that light up green or blue at night like the SVT cobras have them. I got sick of them but ill probably put them back on. The needle calibration is holding me back

[carnut59]

they look like the ones i have in my ranger.

[braupe]

Let me know how they turn out when its all said and done.

[codycat91]

Originally Posted by AllBlakeverything50 I had white face gauge that light up green or blue at night like the SVT cobras have them. I got sick of them but ill probably put them back on. The needle calibration is holding me back

Well theres a few forums that tell you how to do it. You just hook a positive and a negative to the back of the gauges and it sets the needles at straight up. Then just put the needles back on facing directly upwards. I hope its as easy as it sounds

reset instrument cluster - Mustang Forums at StangNet
How to recalibrate your gauges - New York Mustangs - Forums

And you dont even have to take the needles off unless you wanna change the lights. The white faces slip right over the needles