getting rid of the crap in my house for free

stal94gt · February 24th, 2011, 05:53 PM

got some parts i dont need any more ill give away, just pay shipping

stock maf for 01-04 gt (gone)
bosh bypass valve (brand new came with my sc and never used it) (awaiting gone
00-04 serpentine belt
vortech filter, and bracket that holds on the maf

got some other things ill give away i just gotta keep digging

cedsks · February 24th, 2011, 05:54 PM

I call dibs on the maf... PM me....

stal94gt · February 24th, 2011, 05:55 PM

diff shim kit, never used
axle bearings (new)
axle seals (new)
pinion shims, never used
i think and im not sure about this but a vortech intake pipe and silicone connecters

stal94gt · February 24th, 2011, 05:56 PM

1 gallon meth tank with fitting, it has a hole drilled for a level senser in it (gone)

stal94gt · February 24th, 2011, 06:00 PM

2 smooth 8 rib 90mm idler pulleys off a lightning
brand new trigger wheel for 2000+ modulars
oem crank shaft position senser
oem tps senser

0949er · February 24th, 2011, 06:04 PM

bosh valve!!!! please?

KV007 · February 24th, 2011, 06:06 PM

some great things in there, gotta pay for shipping tho? tps sensor would be nice

southfour! · February 24th, 2011, 06:06 PM

would both these be needed for a gear install (8.8)?

diff shim kit, never used
pinion shims, never used

i could also probably use the silicone connectors, im assuming they are for connecting intake (sc) or coldside piping?

stal94gt · February 24th, 2011, 06:08 PM

Originally Posted by 0949er

bosh valve!!!! please?

shoot me with a pm with our address

stal94gt · February 24th, 2011, 06:09 PM

Originally Posted by southfour

would both these be needed for a gear install (8.8)?

diff shim kit, never used
pinion shims, never used

i could also probably use the silicone connectors, im assuming they are for connecting intake (sc) or coldside piping?

yes all 8.8

stal94gt · February 24th, 2011, 06:09 PM

silicone connecters are stock vortech pieces and i have a couple of 3" connecters as well

stal94gt · February 24th, 2011, 06:12 PM

stock yellow bilstien shocks from the back of my cobra they are heavy so shipping may cost a little bit

stal94gt · February 24th, 2011, 06:15 PM

hear is how im going to ship this stuff out, i dont want to make a 1000 trips to the post office, i will wait till i have alot of parts promised out. i also have to check to see how many boxes i have so some stuff i may need to buy a box for

DickH · February 24th, 2011, 06:16 PM

ill take the axle bearings and seals if nobody else called them.

stal94gt · February 24th, 2011, 06:17 PM

here is a big one, i have a set of 3.73's at the shop, i forgot to take them home so i have to run back and check to see if they are still there. if i get them they are gone for free.

stal94gt · February 24th, 2011, 06:17 PM

Originally Posted by DickH

ill take the axle bearings and seals if nobody else called them.

need a pm with your address and paypal me a couple of dollars to ship them

DickH · February 24th, 2011, 06:24 PM

id hate to be greedy but I could use new gears too, mine are all chewed up.

00redgt · February 24th, 2011, 06:24 PM

i got dibs on the 3.73

schoff · February 24th, 2011, 06:24 PM

are the gears used or new ones?

schoff · February 24th, 2011, 06:25 PM

^damn you

February 24th, 2011, 05:53 PM	#1
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	getting rid of the crap in my house for free got some parts i dont need any more ill give away, just pay shipping stock maf for 01-04 gt (gone) bosh bypass valve (brand new came with my sc and never used it) (awaiting gone 00-04 serpentine belt vortech filter, and bracket that holds on the maf got some other things ill give away i just gotta keep digging Last edited by stal94gt; February 24th, 2011 at 06:47 PM.

February 24th, 2011, 05:54 PM	#2
cedsks Premium Member 2004 Mustang GT Join Date: Apr 2010 Location: Dayton Ohio area Posts: 669 iTrader: 0 reviews	I call dibs on the maf... PM me.... __________________ 2004 2v GT--3.90's, t3650, H&R SS, 78mm TB, K&N CAI, steeda bump stop kit, HP Blues shocks and struts, soon to have a rear seat delete, light weight driveshaft.

February 24th, 2011, 05:55 PM	#3
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	diff shim kit, never used axle bearings (new) axle seals (new) pinion shims, never used i think and im not sure about this but a vortech intake pipe and silicone connecters Last edited by stal94gt; February 24th, 2011 at 06:13 PM.

February 24th, 2011, 05:56 PM	#4
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	1 gallon meth tank with fitting, it has a hole drilled for a level senser in it (gone) Last edited by stal94gt; February 24th, 2011 at 10:13 PM.

February 24th, 2011, 06:04 PM	#6
0949er MM Fanatic 2004 Mustang GT 12.85 @ 114 Join Date: Apr 2010 Location: Charlotte Posts: 3,225 iTrader: 0 reviews	bosh valve!!!! please? __________________ MODS: Vortech V1 T-Trim @ 7.5 PSI (tuned down) Comp Cam Stage 2's + more 432 rwhp / 396 rwtq 02/27/2011 NEW VIDEOS! It takes ~$60 a rwhp (over stock) for a 99-04 Mustang GT. Do the Math C2H5OH on the horizon

February 24th, 2011, 06:00 PM	#5
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	2 smooth 8 rib 90mm idler pulleys off a lightning brand new trigger wheel for 2000+ modulars oem crank shaft position senser oem tps senser

February 24th, 2011, 06:06 PM	#7
KV007 Hardcore Enthusiast 2003 Mustang Gt Slow Join Date: Jul 2009 Location: redding,california Posts: 2,532 Blog Entries: 2 iTrader: 2 reviews	some great things in there, gotta pay for shipping tho? tps sensor would be nice __________________ 409rwhp at 4500 rpms.Vortech V1 Intercooled,kurgan motorsports powerpipe, 3.12 pulley, all Mac Exhaust,Sct Tuner,Bolt Ons,Cobra Brakes,MM cc plates,Vis 2000 cobra r hood,MGW shifter,Strange 31 Spline axles,Eaton Possi

February 24th, 2011, 06:06 PM	#8
southfour! Not Banned 2000 Mustang V6 2000 Silverado 1500 Join Date: Jan 2010 Location: Calgary, Canada Posts: 4,545 iTrader: 3 reviews	would both these be needed for a gear install (8.8)? diff shim kit, never used pinion shims, never used i could also probably use the silicone connectors, im assuming they are for connecting intake (sc) or coldside piping? __________________ H/C/I V6 BMC Member: 12521 Cam Video My Build Thread

February 24th, 2011, 06:09 PM	#11
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	silicone connecters are stock vortech pieces and i have a couple of 3" connecters as well

February 24th, 2011, 06:12 PM	#12
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	stock yellow bilstien shocks from the back of my cobra they are heavy so shipping may cost a little bit

February 24th, 2011, 06:15 PM	#13
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	hear is how im going to ship this stuff out, i dont want to make a 1000 trips to the post office, i will wait till i have alot of parts promised out. i also have to check to see how many boxes i have so some stuff i may need to buy a box for

February 24th, 2011, 06:16 PM	#14
DickH MM Fanatic 2003 gt 5.4 32v on the way Join Date: May 2007 Location: Omaha Posts: 4,191 iTrader: 2 reviews	ill take the axle bearings and seals if nobody else called them. __________________ 2003 Mustang gt - usual mods - slowly working on 5.4 swap 2004 srt4 - Stock DD/winter beater Click here for your tuning needs Before asking a gearing related question click THIS link and enjoy all your saved time.

February 24th, 2011, 06:17 PM	#15
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	here is a big one, i have a set of 3.73's at the shop, i forgot to take them home so i have to run back and check to see if they are still there. if i get them they are gone for free.

February 24th, 2011, 06:24 PM	#17
DickH MM Fanatic 2003 gt 5.4 32v on the way Join Date: May 2007 Location: Omaha Posts: 4,191 iTrader: 2 reviews	id hate to be greedy but I could use new gears too, mine are all chewed up. __________________ 2003 Mustang gt - usual mods - slowly working on 5.4 swap 2004 srt4 - Stock DD/winter beater Click here for your tuning needs Before asking a gearing related question click THIS link and enjoy all your saved time.

February 24th, 2011, 06:24 PM	#18
00redgt MM Fanatic 2000 mustang gt Join Date: Oct 2007 Location: vansant,va Posts: 4,092 iTrader: 5 reviews	i got dibs on the 3.73 __________________

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

February 24th, 2011, 06:24 PM	#19
schoff Hardcore Enthusiast 2003 Mustang GT Join Date: Mar 2010 Location: Independence, Missouri Posts: 1,386 iTrader: 0 reviews	are the gears used or new ones? __________________

February 24th, 2011, 06:25 PM	#20
schoff Hardcore Enthusiast 2003 Mustang GT Join Date: Mar 2010 Location: Independence, Missouri Posts: 1,386 iTrader: 0 reviews	^damn you __________________

Threads Similar to: getting rid of the crap in my house for free
Thread	Thread Starter	Forum	Replies	Last Post
When a free engine isn't free...Big Block/Fox swap?	1/4-horse	5.0 Mustangs	8	February 14th, 2011 09:10 PM
I said Who's House? RAGSSSS House	G.T. Rags	The Clubhouse	40	February 13th, 2009 11:53 PM
hardcore audio guys are going to give me crap for this but they were free!	tjames	Audio/Video	6	February 28th, 2008 07:15 PM

All times are GMT -4. The time now is 06:14 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.