HELP PIPE INSTALL!!!!!

Timber · April 28th, 2007, 10:58 PM

Is it on? How do you like it?

zkid01 · April 29th, 2007, 01:26 AM

Thats shitty about the impact gun.. yea i would have soaked it first or used a torch... but just chock this one up as a lesson learned.. Hows it sound man?

AtxStang · April 29th, 2007, 02:25 AM

I did the same thing basically but I broke the bolt off from the friggin manifold on the driver's side. I had to drill it out it took me all day then I just used a longer bolt brought it through the hole I drilled, used loc=tite to secure it more.

After that I will never start a job withough PB Blaster, that stuff is a lifesaver.

Timber · April 29th, 2007, 02:28 AM

Originally Posted by AtxStang

I did the same thing basically but I broke the bolt off from the friggin manifold on the driver's side. I had to drill it out it took me all day then I just used a longer bolt brought it through the hole I drilled, used loc=tite to secure it more.

After that I will never start a job withough PB Blaster, that stuff is a lifesaver.

PB Blaster... Are you picking up on this yet??? It's the shit.

zkid01 · April 29th, 2007, 12:39 PM

Originally Posted by Timber

Originally Posted by AtxStang

I did the same thing basically but I broke the bolt off from the friggin manifold on the driver's side. I had to drill it out it took me all day then I just used a longer bolt brought it through the hole I drilled, used loc=tite to secure it more.

After that I will never start a job withough PB Blaster, that stuff is a lifesaver.

PB Blaster... Are you picking up on this yet??? It's the shit.

... i think he's getting it.

throwedoff · April 29th, 2007, 01:04 PM

Originally Posted by Timber

PB Blaster... Are you picking up on this yet??? It's the shit.

Hell you guys converted me, and I don't even have any job to do in the future that will require it... I'm picking up a few cans when I go to autozone haha

02steedagt · April 29th, 2007, 10:58 PM

HAHA yeah thank for all the help guys.... will def get some pb blaster for next time!

-well, the prochamber is finally on and it sounds INSANE!!!!!! i absolutely love it!!! it idles nice and quiet and then as soon as it gets about 1K rpms it screams at you!!! nice and deep.

-I think I've got a leak somewhere in there though, cuz there is a very slight raspy sound coming from right underneath me. I haven't found it yet, but i'll look at it more next weekend.

-the shop wouldn't do the swap for me (said it was a $25000 fine to remove converters), so I just had them get that nut out of there and I did the swap myself.

-I'll try and get a video clip up sometime this week.

PROCHAMBER FTW!!!!!!

:award

April 28th, 2007, 10:58 PM	#21
Timber Enthusiast Join Date: Dec 2006 Location: No point mentioning those bats... Posts: 867 iTrader: 0 reviews	Is it on? How do you like it? __________________

April 29th, 2007, 01:26 AM	#22
zkid01 Enthusiast Join Date: Apr 2007 Location: Pearl Harbor, HI Posts: 606 iTrader: 0 reviews	Thats shitty about the impact gun.. yea i would have soaked it first or used a torch... but just chock this one up as a lesson learned.. Hows it sound man? __________________ Work Hard....Play Harder.

April 29th, 2007, 10:58 PM	#27
02steedagt Enthusiast Join Date: Jan 2007 Location: Solomons, MD Posts: 634 iTrader: 0 reviews	HAHA yeah thank for all the help guys.... will def get some pb blaster for next time! -well, the prochamber is finally on and it sounds INSANE!!!!!! i absolutely love it!!! it idles nice and quiet and then as soon as it gets about 1K rpms it screams at you!!! nice and deep. -I think I've got a leak somewhere in there though, cuz there is a very slight raspy sound coming from right underneath me. I haven't found it yet, but i'll look at it more next weekend. -the shop wouldn't do the swap for me (said it was a $25000 fine to remove converters), so I just had them get that nut out of there and I did the swap myself. -I'll try and get a video clip up sometime this week. PROCHAMBER FTW!!!!!! :award __________________ "America is all about speed. Hot, nasty, bad ass speed." Eleanor Roosevelt, 1936

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/99-04/21008-help-pipe-install.html
Posted By	For	Type	Date
Mustangs Coast to Coast - Page 2055 - The Mustang Source	This thread	Refback	June 11th, 2009 09:18 PM
Mustangs Coast to Coast - Page 2055 - The Mustang Source	This thread	Refback	June 11th, 2009 07:58 PM
Mustangs Coast to Coast - Page 2055 - The Mustang Source	This thread	Refback	June 11th, 2009 07:42 PM

Threads Similar to: HELP PIPE INSTALL!!!!!
Thread	Thread Starter	Forum	Replies	Last Post
X pipe Install	MnrlGry01gt	General Tech	7	September 11th, 2007 12:58 AM
install on bbk h pipe	dadslx	5.0 Mustangs	12	September 7th, 2007 03:40 PM
Header and X-pipe install	AndyG47	V6 Mustangs	40	August 23rd, 2007 01:32 PM
x pipe install help	chameleonaire	99-04	3	April 29th, 2007 01:06 PM
mid pipe install	o3gtdgs	99-04	8	December 23rd, 2006 03:43 AM

April 29th, 2007, 02:25 AM	#23
AtxStang Regular Join Date: Jul 2006 Posts: 116 iTrader: 0 reviews	I did the same thing basically but I broke the bolt off from the friggin manifold on the driver's side. I had to drill it out it took me all day then I just used a longer bolt brought it through the hole I drilled, used loc=tite to secure it more. After that I will never start a job withough PB Blaster, that stuff is a lifesaver.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 03:52 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.