What do all these wires connect to?

codycat91 · March 28th, 2011, 02:54 PM

I just bought this rca line out converter but what do all the other wires connect to? Pics would be awesome. Thanks
RCA Car Line Converter Output Adapter HI LOW LEVEL 405 - eBay (item 400069227507 end time Apr-15-11 15:09:39 PDT)

Reloaded · March 28th, 2011, 03:24 PM

Mustangworld Subwoofer install to Mach460

From here: installing amp/sub to stock mach headunit

In fact, I even posted in that thread...

The seach button is your friend btw.

codycat91 · March 28th, 2011, 06:53 PM

Ya but theres 4 wires coming out and it says 2 are for left speaker and 2 are for right speaker. I read the article before but it doesnt specifically say which wires connnect to what. It says 2 black/green and 2 black/white. Which ones are for left and which ones are for right?

00redgt · March 28th, 2011, 07:14 PM

well if you bought the same one thats in the ebay listing then you -+ is on the top of the converter ,all you do is tap into the left speaker of you car with the left side wires and then do the right speaker the same way , use the rcas for you amp..the green wire beside the rcs output is a ground

codycat91 · March 28th, 2011, 07:18 PM

Which wires on the car are which? In the article, it just says 2 blk/grn, 2 blk/wht. Which one is positive and which one is negative? Or am I missing what youre saying?

codycat91 · March 28th, 2011, 07:36 PM

So basically, I know what the left and right + and - wires are on the converter, but I dont know which wires in the factory system to hook them up to....

Reloaded · March 28th, 2011, 07:43 PM

Originally Posted by codycat91

Which wires on the car are which? In the article, it just says 2 blk/grn, 2 blk/wht. Which one is positive and which one is negative? Or am I missing what youre saying?

Originally Posted by Article

What you need to do is splice into the following wires (2) black wires with white stripes and (2) black wires with green stripes w/ the white striped ones being negative

Is that what you're looking for?

codycat91 · March 28th, 2011, 07:46 PM

Ohhhhhhhhhhhhhh whoops I totally missed the part about the striped ones being negative :/ My bad. Thanks

codycat91 · March 28th, 2011, 07:48 PM

So if I read that right, theres a black/white, another black/white, and two black/greens? Do I need to know which ones are left and which ones are right or is there no difference?

codycat91 · March 28th, 2011, 07:51 PM

I'm trying not to over think this but the diagram on the converter shows specific wires for left and right, positive and negative. I just dont wanna eff anything up

codycat91 · March 28th, 2011, 07:59 PM

If the left and right were different colors, I would have no further questions, your honor.

00redgt · March 28th, 2011, 08:20 PM

it shouldnt matter as long as you get the+to+ and -to-

codycat91 · March 28th, 2011, 08:22 PM

Alright sounds good. Everything (sub, amp, box) will be here by the end of the week

codycat91 · March 28th, 2011, 08:22 PM

Thanks again guys for all the help

00redgt · March 28th, 2011, 08:29 PM

what subs and amp did you go with

codycat91 · March 28th, 2011, 08:35 PM

Originally Posted by 00redgt

what subs and amp did you go with

Nothing too crazy. Just a 10" kenwood sub but it's rated at 300rms and 1000 peak and an alpine amp. I forgot how much i missed it till I went for a ride in my buddies civic si. His factory 8" sub sounds pretty good. I was impressed. Hopefully mine will sound as good.

00redgt · March 28th, 2011, 08:37 PM

im thinking about pulling my sub and amp out.i hardly turn it on anymore

codycat91 · March 28th, 2011, 08:44 PM

Ehhh idk you'll prob end up missing it for the few times you do use it. What do you have?

00redgt · March 28th, 2011, 09:51 PM

12 type r ported with a jbl 1200.1 mono amp

codycat91 · April 1st, 2011, 02:51 PM

Well I broke down and got a headunit so if anybody wants a line-out converter, send me a pm

March 28th, 2011, 02:54 PM	#1
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	What do all these wires connect to? I just bought this rca line out converter but what do all the other wires connect to? Pics would be awesome. Thanks RCA Car Line Converter Output Adapter HI LOW LEVEL 405 - eBay (item 400069227507 end time Apr-15-11 15:09:39 PDT) __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 06:53 PM	#3
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	Ya but theres 4 wires coming out and it says 2 are for left speaker and 2 are for right speaker. I read the article before but it doesnt specifically say which wires connnect to what. It says 2 black/green and 2 black/white. Which ones are for left and which ones are for right? __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 07:14 PM	#4
00redgt MM Fanatic 2000 mustang gt Join Date: Oct 2007 Location: vansant,va Posts: 4,092 iTrader: 5 reviews	well if you bought the same one thats in the ebay listing then you -+ is on the top of the converter ,all you do is tap into the left speaker of you car with the left side wires and then do the right speaker the same way , use the rcas for you amp..the green wire beside the rcs output is a ground __________________

March 28th, 2011, 07:18 PM	#5
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	Which wires on the car are which? In the article, it just says 2 blk/grn, 2 blk/wht. Which one is positive and which one is negative? Or am I missing what youre saying? __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 07:36 PM	#6
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	So basically, I know what the left and right + and - wires are on the converter, but I dont know which wires in the factory system to hook them up to.... __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 07:46 PM	#8
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	Ohhhhhhhhhhhhhh whoops I totally missed the part about the striped ones being negative :/ My bad. Thanks __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 07:48 PM	#9
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	So if I read that right, theres a black/white, another black/white, and two black/greens? Do I need to know which ones are left and which ones are right or is there no difference? __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 07:51 PM	#10
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	I'm trying not to over think this but the diagram on the converter shows specific wires for left and right, positive and negative. I just dont wanna eff anything up __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 07:59 PM	#11
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	If the left and right were different colors, I would have no further questions, your honor. __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 08:20 PM	#12
00redgt MM Fanatic 2000 mustang gt Join Date: Oct 2007 Location: vansant,va Posts: 4,092 iTrader: 5 reviews	it shouldnt matter as long as you get the+to+ and -to- __________________

March 28th, 2011, 08:22 PM	#13
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	Alright sounds good. Everything (sub, amp, box) will be here by the end of the week __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 08:22 PM	#14
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	Thanks again guys for all the help __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 08:29 PM	#15
00redgt MM Fanatic 2000 mustang gt Join Date: Oct 2007 Location: vansant,va Posts: 4,092 iTrader: 5 reviews	what subs and amp did you go with __________________

March 28th, 2011, 08:37 PM	#17
00redgt MM Fanatic 2000 mustang gt Join Date: Oct 2007 Location: vansant,va Posts: 4,092 iTrader: 5 reviews	im thinking about pulling my sub and amp out.i hardly turn it on anymore __________________

March 28th, 2011, 08:44 PM	#18
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	Ehhh idk you'll prob end up missing it for the few times you do use it. What do you have? __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

March 28th, 2011, 09:51 PM	#19
00redgt MM Fanatic 2000 mustang gt Join Date: Oct 2007 Location: vansant,va Posts: 4,092 iTrader: 5 reviews	12 type r ported with a jbl 1200.1 mono amp __________________

April 1st, 2011, 02:51 PM	#20
codycat91 MM Fanatic 2003 MUSTANG GT Join Date: Dec 2010 Location: Buffalo, NY Posts: 3,496 iTrader: 10 reviews	Well I broke down and got a headunit so if anybody wants a line-out converter, send me a pm __________________ 4v MMR 4.75 Stroker, Teksid block .020 over, 9.27:1CR, Posi Race Ported Eaton 4v MMR Stroker 1000 / Posi Race Ported Eaton Build How To: 2v to 4v COP Swap

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: What do all these wires connect to?
Thread	Thread Starter	Forum	Replies	Last Post
desktop wont connect	G.T. Rags	The Clubhouse	5	May 18th, 2010 02:01 AM
what does this connect to?	fateisajester	96-98	3	March 31st, 2009 08:13 AM
can't connect battery	texasd18e	99-04	8	February 8th, 2009 08:00 AM
cant connect email to PDA	weems	The Clubhouse	9	February 18th, 2008 12:36 AM
Where do I connect my vacuum pump?	MonsterSD	5.0 Mustangs	1	August 12th, 2007 04:26 AM

All times are GMT -4. The time now is 03:57 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.