Lambo Door kit installed Finally! Pictures!!!

Smoothgrandmama · May 29th, 2007, 10:26 AM

Here You Go was up till 5 Am monday morning finishing this this thing!

GTsetGO · May 29th, 2007, 11:43 AM

looks good brah. how much of a pain was it to install.

superbeef1000 · May 29th, 2007, 01:55 PM

sweet ride ill bet it was a pain in the ass to get the doors lined up

HMUSN · May 29th, 2007, 01:57 PM

not really my thing but it looks like it was a clean install.
good job man

xedubx · May 29th, 2007, 03:40 PM

dont think id do it myself but nice look brosef!

02StangGToWNEr · May 29th, 2007, 04:15 PM

Nice! Looks like the install turned out good after all.

tlr96 · May 29th, 2007, 05:35 PM

not normally my cup of tea but i kinda like it. glad the install turned out ok, good job!

Smoothgrandmama · May 30th, 2007, 09:07 AM

It wasn't too hard to install The most time consuming Thing is Actually extending the wires That took about 4 hrs for the driver side and 2 1/2 for the passenger.
overall I could a door now in 6-8 hours.
But ya having to cut and weld both hinges before I could install them was a pain.
Thx for the Comments

Xman · May 30th, 2007, 09:48 AM

Daaamn.

neckbonekat · May 31st, 2007, 12:17 AM

Time well spent, because that looks good!

ujslost · May 31st, 2007, 12:42 AM

I love it! Looks great. So you got the weld on kit? How come not the bolt on? What kit and how much exactly?

Garhfer · May 31st, 2007, 01:56 AM

It does look pretty sweet!

FOR POINT SIX · May 31st, 2007, 06:56 AM

I have never seen one of these kits in person. Do you have a pic of the hinges installed.

Smoothgrandmama · May 31st, 2007, 08:28 AM

Originally Posted by ujslost

I love it! Looks great. So you got the weld on kit? How come not the bolt on? What kit and how much exactly?

I got The Bolt on kit.......it didn't fit So some torching and welding was required.

At any rate The kit was from ebay The buy it now was 400$ shipping was 50$
I made an offer for 320$ it was accepted so it was 380$ shipped
When I found out it didn't fit I contacted The seller and requested a 50$ refund which He agreed to.
So the whole kit ended up costing 320$

And a wasted day to find out they didn't fit (About 15 hours it being the first time I ever took off a fender).

And I can Hook You up pics of the hinges and everything!
Heck I could Give step-by-step instructions!
I took pics of every aspect of the install Because I couldn't find a thing on the net about how to freaking install them.

neckbonekat · May 31st, 2007, 10:31 AM

Originally Posted by Smoothgrandmama

Originally Posted by ujslost

I love it! Looks great. So you got the weld on kit? How come not the bolt on? What kit and how much exactly?

I got The Bolt on kit.......it didn't fit So some torching and welding was required.

At any rate The kit was from ebay The buy it now was 400$ shipping was 50$
I made an offer for 320$ it was accepted so it was 380$ shipped
When I found out it didn't fit I contacted The seller and requested a 50$ refund which He agreed to.
So the whole kit ended up costing 320$

And a wasted day to find out they didn't fit (About 15 hours it being the first time I ever took off a fender).

And I can Hook You up pics of the hinges and everything!
Heck I could Give step-by-step instructions!
I took pics of every aspect of the install Because I couldn't find a thing on the net about how to freaking install them.

You definitly had to take the route less traveled, but it worked out better $$$$$ wise and it probably made your doors more secure now that they are welded on instead of just bolted, but of course this means when/if you sell the car they go too.

Garhfer · May 31st, 2007, 06:29 PM

Originally Posted by Smoothgrandmama

Originally Posted by ujslost

I love it! Looks great. So you got the weld on kit? How come not the bolt on? What kit and how much exactly?

I got The Bolt on kit.......it didn't fit So some torching and welding was required.

At any rate The kit was from ebay The buy it now was 400$ shipping was 50$
I made an offer for 320$ it was accepted so it was 380$ shipped
When I found out it didn't fit I contacted The seller and requested a 50$ refund which He agreed to.
So the whole kit ended up costing 320$

And a wasted day to find out they didn't fit (About 15 hours it being the first time I ever took off a fender).

And I can Hook You up pics of the hinges and everything!
Heck I could Give step-by-step instructions!
I took pics of every aspect of the install Because I couldn't find a thing on the net about how to freaking install them.

You should post step by step instructions then so somebody else has guidelines in case they want to use them

ATLmustang · May 31st, 2007, 09:46 PM

Originally Posted by Garhfer

Originally Posted by Smoothgrandmama

Originally Posted by ujslost

I love it! Looks great. So you got the weld on kit? How come not the bolt on? What kit and how much exactly?

I got The Bolt on kit.......it didn't fit So some torching and welding was required.

At any rate The kit was from ebay The buy it now was 400$ shipping was 50$
I made an offer for 320$ it was accepted so it was 380$ shipped
When I found out it didn't fit I contacted The seller and requested a 50$ refund which He agreed to.
So the whole kit ended up costing 320$

And a wasted day to find out they didn't fit (About 15 hours it being the first time I ever took off a fender).

And I can Hook You up pics of the hinges and everything!
Heck I could Give step-by-step instructions!
I took pics of every aspect of the install Because I couldn't find a thing on the net about how to freaking install them.

You should post step by step instructions then so somebody else has guidelines in case they want to use them

+1 on that
looks good glad you got them on instead of letting them kick your ass :award

Smoothgrandmama · May 31st, 2007, 09:56 PM

Originally Posted by neckbonekat

Originally Posted by Smoothgrandmama

Originally Posted by ujslost

I love it! Looks great. So you got the weld on kit? How come not the bolt on? What kit and how much exactly?

I got The Bolt on kit.......it didn't fit So some torching and welding was required.

At any rate The kit was from ebay The buy it now was 400$ shipping was 50$
I made an offer for 320$ it was accepted so it was 380$ shipped
When I found out it didn't fit I contacted The seller and requested a 50$ refund which He agreed to.
So the whole kit ended up costing 320$

And a wasted day to find out they didn't fit (About 15 hours it being the first time I ever took off a fender).

And I can Hook You up pics of the hinges and everything!
Heck I could Give step-by-step instructions!
I took pics of every aspect of the install Because I couldn't find a thing on the net about how to freaking install them.

You definitly had to take the route less traveled, but it worked out better $$$$$ wise and it probably made your doors more secure now that they are welded on instead of just bolted, but of course this means when/if you sell the car they go too.

Actually The Kit is not welded to the car I'll post a picture to show You what had to be welded.

Smoothgrandmama · May 31st, 2007, 10:01 PM

Ok here You go Hinges and everything
I'll get a pic of the welds tommorrow

he he the last one I just threw in there ;-/

shroom · May 31st, 2007, 10:09 PM

Crazy. I like it. Looks really good. Especially for 320

May 29th, 2007, 11:43 AM	#2
GTsetGO Cigar Assassin 2004 Mustang GT 12.88 @ 112 Join Date: Aug 2005 Location: A Galaxy Far, Far Away Posts: 13,890 iTrader: 10 reviews	looks good brah. how much of a pain was it to install. __________________ Cigar Samplers for Sale

May 29th, 2007, 01:55 PM	#3
superbeef1000 Hardcore Enthusiast Join Date: Aug 2006 Location: mesa , arizona Posts: 1,475 iTrader: 2 reviews	sweet ride ill bet it was a pain in the ass to get the doors lined up __________________ a bunch of stuff to make my car faster http://www.moddedmustangs.com/forums...e-member-1497/

May 29th, 2007, 01:57 PM	#4
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	not really my thing but it looks like it was a clean install. good job man __________________

May 29th, 2007, 05:35 PM	#7
tlr96 Hardcore Enthusiast 1996 Mustang GT Join Date: Mar 2007 Location: Effingham, IL Posts: 1,796 iTrader: 0 reviews	not normally my cup of tea but i kinda like it. glad the install turned out ok, good job! __________________ view my garage for pics and modifications listen to my exhaust video 1 video 2 video 3

May 30th, 2007, 09:07 AM	#8
Smoothgrandmama MasterDeBater 12 GT 8.46@88 1/8 Join Date: Apr 2007 Location: Willis,Texas Posts: 6,900 iTrader: 6 reviews	It wasn't too hard to install The most time consuming Thing is Actually extending the wires That took about 4 hrs for the driver side and 2 1/2 for the passenger. overall I could a door now in 6-8 hours. But ya having to cut and weld both hinges before I could install them was a pain. Thx for the Comments __________________ Join The MM Facebook: Modded Mustangs Facebook Vote For Modded Mustangs Ride of the Month Eskimo Brothers To Smooth: Safi, Blitz34, Graystang01, WillTheThrill, Bwal

May 29th, 2007, 03:40 PM	#5
xedubx Regular Join Date: May 2007 Location: Lonestarville Posts: 68 iTrader: 0 reviews	dont think id do it myself but nice look brosef!

May 29th, 2007, 04:15 PM	#6
02StangGToWNEr Hardcore Enthusiast 2006 Mustang GT Join Date: Feb 2007 Location: Upstate NY Posts: 2,698 iTrader: 0 reviews	Nice! Looks like the install turned out good after all.

May 31st, 2007, 12:17 AM	#10
neckbonekat I Post Entirely Way Too Much 2005 Cadillac STS V8 ???????????????? Join Date: Dec 2006 Location: Upstate NY Posts: 6,344 iTrader: 3 reviews	Time well spent, because that looks good! __________________ ITEMS FOR SALE! 4.10 GEARS + BEARING KIT

May 31st, 2007, 12:42 AM	#11
ujslost MM Fanatic Join Date: Mar 2007 Location: Albertville, AL Posts: 3,920 Blog Entries: 1 iTrader: 1 reviews	I love it! Looks great. So you got the weld on kit? How come not the bolt on? What kit and how much exactly? __________________ 1986 Mustang GT t-top time piece!

May 31st, 2007, 01:56 AM	#12
Garhfer Hardcore Enthusiast 2004 Mustang GT Conv. Join Date: Mar 2007 Location: Edgewater, FL Posts: 1,790 iTrader: 0 reviews	It does look pretty sweet! __________________ 2004 GT Boosted by Vortech

May 31st, 2007, 06:56 AM	#13
FOR POINT SIX Enthusiast Join Date: Aug 2006 Location: Nashville TN Posts: 679 iTrader: 0 reviews	I have never seen one of these kits in person. Do you have a pic of the hinges installed. __________________ http://www.myspace.com/forpointsix My Garage

May 31st, 2007, 10:09 PM	#20
shroom Regular Join Date: Feb 2007 Posts: 165 iTrader: 0 reviews	Crazy. I like it. Looks really good. Especially for 320 __________________ Please PM me if you find out of any good deals on a terminator! Thanks! "8/6/1945 little boy was dropped on Hiroshima......8/9/1945 FAT MAN was dropped on Nagasaki.....8/1/2002 Ford Motor Co. dropped the TERMINATOR on your Japanese ass"

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Lambo Door kit installed Finally! Pictures!!!
Thread	Thread Starter	Forum	Replies	Last Post
Pictures of the new subs, finally	Archy88	Audio/Video	4	October 21st, 2007 02:31 PM
finally pictures!!	B0B	99-04	2	May 12th, 2007 08:21 PM
Lambo door suggestions	DaemonJ	Visual	11	March 28th, 2007 11:17 PM
MGW finally installed	neckbonekat	99-04	16	March 15th, 2007 04:01 PM

All times are GMT -4. The time now is 06:07 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.