Plasti-Dip + Decklid

661GT · January 5th, 2012, 06:20 AM

Sooo I've been reading about plasti dip lately and want to Black out my rear deck lid panel between the lights. im debating on weather doing this because the one from AM is 50$ compared to a can of 6$. Have you guys experimented this before? and it gets really hot here during the summer. would heat damage my paint?

hooliganryder · January 5th, 2012, 11:06 AM

Go for it.. Worse case u don't like it and peel it off.. I would wash and wash that area well that way if u do wanna peel it off it's easier

Cabikejumper · January 5th, 2012, 02:07 PM

I'd get the one from AM. Plasti dip is flat black and looks weird. IMO.

MrTenacious2KGT · January 5th, 2012, 02:27 PM

Rocky mountain graphics has it for 35$

661GT · January 6th, 2012, 05:22 AM

Soo I did it & I personally like it

I'll post a pic right now. As soon as I figure out how... Stupid iPhone.

661GT · January 6th, 2012, 05:32 AM

http://i44.photobucket.com/albums/f30/Seprehuoyeviglli/Mobile%20Uploads/IMG_0678.jpg

Probably not the best job but I like it

I thought it would have looked ugly being flat black , but actually looks mean IMO .

94racing · January 6th, 2012, 08:28 AM

^ didnt come up use the [IMG] code at the bottom of the urls.

Cabikejumper · January 6th, 2012, 12:25 PM

Upload to photobucket.

stal94gt · January 6th, 2012, 12:42 PM

94racing · January 6th, 2012, 01:04 PM

^amazing i cant wait to do mine

TrueBlueGT2002 · January 6th, 2012, 01:06 PM

yeah man that looks good, i did mine also and really like it.

661GT · January 6th, 2012, 05:15 PM

Thanks guys! It was super easy

TrueBlueGT2002 · January 6th, 2012, 08:25 PM

I did the bottom accents as well just to see if i would like it and i haven't taken it off yet

661GT · January 7th, 2012, 02:44 AM

Originally Posted by TrueBlueGT2002

I did the bottom accents as well just to see if i would like it and i haven't taken it off yet

Pics? I was thinking about it but got called into work lol

04GTdrop · January 7th, 2012, 03:30 AM

I like it...plan on doing mine, should help set off the matching torch red ford emblem on mine. Gotta wait for some decent weather out here...

B's04gt · January 7th, 2012, 03:31 AM

Just do it man, 6$ if you dont like it take it off.

mustanginky · January 7th, 2012, 10:45 AM

how did you mark off the lines without it peeling off everywhere else? tape?

SON1C · January 7th, 2012, 11:58 AM

should have removed emblem first

661GT · January 7th, 2012, 03:06 PM

I just used blue painters tape to mask it off, then witch a blade edge it off before taking off the tape.

& because I don't like chrom :O

January 5th, 2012, 06:20 AM	#1
661GT Regular 2000 Mustang GT Join Date: Nov 2010 Location: Bakersfield, CA Posts: 115 iTrader: 0 reviews	Plasti-Dip + Decklid Sooo I've been reading about plasti dip lately and want to Black out my rear deck lid panel between the lights. im debating on weather doing this because the one from AM is 50$ compared to a can of 6$. Have you guys experimented this before? and it gets really hot here during the summer. would heat damage my paint?

January 5th, 2012, 11:06 AM	#2
hooliganryder Regular 00 mustang gt Join Date: Jul 2010 Location: mcewen tn Posts: 393 iTrader: 0 reviews	Go for it.. Worse case u don't like it and peel it off.. I would wash and wash that area well that way if u do wanna peel it off it's easier __________________ Cms stage 2 cams 04 explorer aluminum engine spec 3 clutch sct x3 k and n cai 410 gears underdrive pulleys roush short throw

January 6th, 2012, 08:28 AM	#7
94racing Hardcore Enthusiast 2006 mustang gt500racecar Join Date: Jul 2010 Location: athens ohio Posts: 1,857 iTrader: 0 reviews	^ didnt come up use the [IMG] code at the bottom of the urls. __________________ Check out our race team! http://www.facebook.com/media/set/?s...3927011?v=wall American Iron Mustang- ^1.6 lateral gs 03 Steeda 1.2 lateral Gs-ra1 08 Gt

January 6th, 2012, 12:42 PM	#9
stal94gt I Post Entirely Way Too Much 2003 mustang v6 ;) slow Join Date: May 2010 Location: eglin afb florida Posts: 10,197 iTrader: 2 reviews	__________________ bone stock from the factory!

January 6th, 2012, 01:04 PM	#10
94racing Hardcore Enthusiast 2006 mustang gt500racecar Join Date: Jul 2010 Location: athens ohio Posts: 1,857 iTrader: 0 reviews	^amazing i cant wait to do mine __________________ Check out our race team! http://www.facebook.com/media/set/?s...3927011?v=wall American Iron Mustang- ^1.6 lateral gs 03 Steeda 1.2 lateral Gs-ra1 08 Gt

January 5th, 2012, 02:27 PM	#4
MrTenacious2KGT Newbie 2KGT Join Date: Aug 2010 Location: Bakersfield, CA Posts: 28 iTrader: 0 reviews	Rocky mountain graphics has it for 35$

January 6th, 2012, 05:22 AM	#5
661GT Regular 2000 Mustang GT Join Date: Nov 2010 Location: Bakersfield, CA Posts: 115 iTrader: 0 reviews	Soo I did it & I personally like it I'll post a pic right now. As soon as I figure out how... Stupid iPhone.

January 6th, 2012, 05:32 AM	#6
661GT Regular 2000 Mustang GT Join Date: Nov 2010 Location: Bakersfield, CA Posts: 115 iTrader: 0 reviews	http://i44.photobucket.com/albums/f30/Seprehuoyeviglli/Mobile%20Uploads/IMG_0678.jpg Probably not the best job but I like it I thought it would have looked ugly being flat black , but actually looks mean IMO .

January 6th, 2012, 01:06 PM	#11
TrueBlueGT2002 Regular 2002 mustang gt 14.069 @ 100 Join Date: Mar 2011 Location: Cocoa beach fl Posts: 406 iTrader: 0 reviews	yeah man that looks good, i did mine also and really like it. __________________ Bassani O/R X Pipe, Borla Stingers, 70mm Accufab Throttle Body, K&N Intake, SCT XF3 Tuner, MGW STS GO BUCS!!

January 6th, 2012, 05:15 PM	#12
661GT Regular 2000 Mustang GT Join Date: Nov 2010 Location: Bakersfield, CA Posts: 115 iTrader: 0 reviews	Thanks guys! It was super easy

January 6th, 2012, 08:25 PM	#13
TrueBlueGT2002 Regular 2002 mustang gt 14.069 @ 100 Join Date: Mar 2011 Location: Cocoa beach fl Posts: 406 iTrader: 0 reviews	I did the bottom accents as well just to see if i would like it and i haven't taken it off yet __________________ Bassani O/R X Pipe, Borla Stingers, 70mm Accufab Throttle Body, K&N Intake, SCT XF3 Tuner, MGW STS GO BUCS!!

January 7th, 2012, 03:30 AM	#15
04GTdrop Regular 2004 Mustang GT convert Join Date: May 2010 Location: Denver Posts: 67 iTrader: 0 reviews	I like it...plan on doing mine, should help set off the matching torch red ford emblem on mine. Gotta wait for some decent weather out here... __________________ Borla Stingers, JBA O/R H, K&N CAI, MGW short throw, FRPP 4.10's, FRPP "c" springs

January 7th, 2012, 10:45 AM	#17
mustanginky MM Fanatic 2000 gt Join Date: Feb 2009 Location: La grange, KY Posts: 4,259 iTrader: 2 reviews	how did you mark off the lines without it peeling off everywhere else? tape? __________________ Procharged 2000 5 Speed BAB GT, built motor, blower cams, speedy dyno tune 412 hp, 450 rw tq HARDCORE CREW BRIGHT ATLANTIC BLUE CREW #1 MEMBER

January 7th, 2012, 11:58 AM	#18
SON1C Run ur car, not ur mouth. 2003 Sonic Blue 4.6L Join Date: Jul 2010 Location: Northern Virginia Posts: 4,047 Blog Entries: 1 iTrader: 3 reviews	should have removed emblem first __________________ 238rwhp/263rwtq Drew's Build Thread

January 7th, 2012, 03:06 PM	#19
661GT Regular 2000 Mustang GT Join Date: Nov 2010 Location: Bakersfield, CA Posts: 115 iTrader: 0 reviews	I just used blue painters tape to mask it off, then witch a blade edge it off before taking off the tape. & because I don't like chrom :O

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Plasti-Dip + Decklid
Thread	Thread Starter	Forum	Replies	Last Post
Show me your plasti dip!	KV007	99-04	16	October 27th, 2011 09:17 AM
Painting Plasti-dip?	02BlueMustangGT	Visual	4	October 3rd, 2011 07:17 PM
Plasti Dip Bullitts	Blue Boss	99-04	27	September 25th, 2011 11:57 PM
What about plasti dip?	RideThePony14	2005 - 2010	34	August 24th, 2011 01:19 PM

All times are GMT -4. The time now is 02:48 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.