My ON3 Performance 2V Turbo Build

Blak GT · January 25th, 2012, 10:44 PM

Sub'd!

Been wanting a turbo for a while now but it'll probably wait til i get a new motor

Quick question though, I've been looking at this and the hellion single turbo kit... What makes the On3 kit so much cheaper?

mrbigjeep · January 25th, 2012, 10:52 PM

Originally Posted by Blak GT

Sub'd!

Been wanting a turbo for a while now but it'll probably wait til i get a new motor

Quick question though, I've been looking at this and the hellion single turbo kit... What makes the On3 kit so much cheaper?

cheaper parts like china made turbo and piping...as well as waste gate and bov...

unless they've changed since they came out with the original kit

BaznastyDave · January 25th, 2012, 11:10 PM

Originally Posted by Blak GT

Sub'd!

Been wanting a turbo for a while now but it'll probably wait til i get a new motor

Quick question though, I've been looking at this and the hellion single turbo kit... What makes the On3 kit so much cheaper?

Still a great kit for the money though, Caleb and Dan at Fastlane Motorsports and Pro Dyno both said they like the kits for the price BUUTTT you get what you pay for.

Blak GT · January 26th, 2012, 10:55 AM

^^^ Thanks guys! I'll probably end up saving for the hellion kit after I get a new engine and just run nitrous till then

showoff · January 26th, 2012, 04:23 PM

i got the pass.side header on. it was much,much easier than the dr.side. now there is alot of room around the starter,i can get to all three bolts with ease.

here is a pic of part of the oil cooler re-location kit and the oil feed adapter on the car

tapped the pan in the car. hopefully its sealed,looks like crap though. maybe i'll get some black paint for it.

Mustang_Girl_32 · January 26th, 2012, 04:28 PM

Man, I'm behind we have moved on to the car install..

4.6DreameR · January 26th, 2012, 05:41 PM

Man, I want one of these kits.....
I need a turbo 2v

CobraStang161 · January 26th, 2012, 07:16 PM

Looks like parts from home depot... Id pass...

B's04gt · January 26th, 2012, 07:24 PM

So sick OP!

showoff · February 3rd, 2012, 11:29 PM

i installed the oil filter relocation kit. i built a custom bracket for it.

showoff · February 3rd, 2012, 11:35 PM

the hotside is all done. oil line and drain is finished. next thing is the coldside. getting closer.

number1gt · February 3rd, 2012, 11:36 PM

Man looking good, I don't like fram though...

condor123 · March 19th, 2012, 01:48 AM

verry interested in this kit subd

JoshDrex00gt · March 19th, 2012, 01:59 AM

looks good, you'll like the kit. especially the power gains, woke my 2v up like its no joke. 504 whp 501 wtq @ 12 psi through auto with stock heads/cams.

Nateman15 · March 21st, 2012, 04:49 PM

Update? Cold Side done yet?

99Ls1fever · April 11th, 2012, 12:53 PM

Awesome Man, Any updates yet???

02greygt · April 18th, 2012, 02:55 AM

Sweet set up and nice pics. I've been looking at this set up. Look forward to seeing this finished.

02GTAUTO · April 18th, 2012, 04:26 AM

Looks awesome. props for doing it yourself. Although I had a way worst time on the pass side header, driver was easier for me

January 26th, 2012, 04:28 PM	#146
Mustang_Girl_32 Hardcore Enthusiast 2003 v6/2003 GT vert Join Date: Jun 2010 Location: Illinois Posts: 1,761 iTrader: 11 reviews	Man, I'm behind we have moved on to the car install.. __________________ 2003 sonic blue v6- 18" gianna's, straight pipes, 12" DC level 5 with DC 3.5 K 2003 sonic blue GT vert- Bout to be a Procharged P1sc BEAST

January 26th, 2012, 07:16 PM	#148
CobraStang161 Hardcore Enthusiast 4V twin turbo 2000 GT I live my life a quarter mile at a time xD Join Date: Jan 2007 Location: Staten Island, NY Posts: 1,739 iTrader: 0 reviews	Looks like parts from home depot... Id pass... __________________ 2000 Mustang GT Built 4V Motor with Sullivan Single Plane Intake Custom 66MM BB TT kit Borla XR-1 Dumped before rear Moser built 9" Rear 35 spline WaveTrac Diff with 3.75s 35 spline Moser axles 14PT roll cage and minitubbed

February 3rd, 2012, 11:36 PM	#152
number1gt Hardcore Enthusiast 2002 mustang gt Join Date: Jan 2010 Posts: 1,896 iTrader: 1 reviews	Man looking good, I don't like fram though... __________________ Rock stock

March 19th, 2012, 01:59 AM	#154
JoshDrex00gt Hardcore Enthusiast 2000 Mustang GT Join Date: Sep 2010 Location: South Carolina Posts: 1,539 iTrader: 0 reviews	looks good, you'll like the kit. especially the power gains, woke my 2v up like its no joke. 504 whp 501 wtq @ 12 psi through auto with stock heads/cams. __________________ ll 2000 Mustang GT : On3 Powered ll ll Pump Gas Dyno ll ll4R70W Gear Guide ll

March 21st, 2012, 04:49 PM	#155
Nateman15 Regular 2004 Mustang GT 13.37@101.22 Join Date: Feb 2009 Location: Manhattan, Kansas Posts: 404 iTrader: 0 reviews	Update? Cold Side done yet? __________________ Kansas State University Mechanical Engineering Air Force ROTC Full Ride Scholarship Delta Sigma Phi GT...garaged

January 26th, 2012, 04:23 PM	#145
showoff Regular Join Date: Feb 2011 Location: arizona Posts: 65 iTrader: 0 reviews	i got the pass.side header on. it was much,much easier than the dr.side. now there is alot of room around the starter,i can get to all three bolts with ease. here is a pic of part of the oil cooler re-location kit and the oil feed adapter on the car tapped the pan in the car. hopefully its sealed,looks like crap though. maybe i'll get some black paint for it.

February 3rd, 2012, 11:29 PM	#150
showoff Regular Join Date: Feb 2011 Location: arizona Posts: 65 iTrader: 0 reviews	i installed the oil filter relocation kit. i built a custom bracket for it.

February 3rd, 2012, 11:35 PM	#151
showoff Regular Join Date: Feb 2011 Location: arizona Posts: 65 iTrader: 0 reviews	the hotside is all done. oil line and drain is finished. next thing is the coldside. getting closer.

March 19th, 2012, 01:48 AM	#153
condor123 Regular 2003 Gt slow Join Date: Jan 2012 Location: Chicago Land Posts: 254 iTrader: 0 reviews	verry interested in this kit subd

April 11th, 2012, 12:53 PM	#156
99Ls1fever Regular 2ndPlaceSetofSteakKnives Join Date: Feb 2011 Location: Boulder, CO Posts: 269 iTrader: 0 reviews	Awesome Man, Any updates yet??? __________________ 03' Cobra \| 3.4 Whipple \| SRA Swap \| 99' SS \| Forged 347 \| YSI 16psi \| 12 Bolt \| 96' Cobra \| On3 FF Kit \| T45 Source Tranny \| 3.55's \| 91' GT \| GT40 Intake \| CAI \| Headers \| www.fquick.com/99Ls1fever

April 18th, 2012, 02:55 AM	#157
02greygt Newbie 2002 Mustang GT Join Date: Apr 2012 Location: California Posts: 18 iTrader: 0 reviews	Sweet set up and nice pics. I've been looking at this set up. Look forward to seeing this finished.

April 18th, 2012, 04:26 AM	#158
02GTAUTO Regular 2002 Mustang gt As fast as I can push Join Date: Aug 2011 Location: Grand Forks, ND Posts: 446 iTrader: 2 reviews	Looks awesome. props for doing it yourself. Although I had a way worst time on the pass side header, driver was easier for me

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/99-04/245180-my-on3-performance-2v-turbo-build.html
Posted By	For	Type	Date
on3 turbo - Page 10 - LS1TECH	This thread	Refback	January 15th, 2012 09:55 PM

Threads Similar to: My ON3 Performance 2V Turbo Build
Thread	Thread Starter	Forum	Replies	Last Post
2011 GT Performance Build!	RIDE-F-X	2011+	4	December 1st, 2011 09:54 AM
Looking to build a budget performance 4.6 over the winter ... Suggestions please.	Stlhrse	99-04	21	August 7th, 2011 09:37 AM
Turbo Build couple of questions (on3 performance)	maxgst	99-04	76	May 15th, 2011 08:19 PM
Wrxified's SGM - Performance Package Build	wrxified	Projects	8	March 30th, 2011 07:03 AM
Performance V6 build ideas.	rhauf	V6 Mustangs	5	May 14th, 2010 06:41 AM

All times are GMT -4. The time now is 02:54 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.