a favor from 1 new edge owner to another.

laoutlaw01 · February 7th, 2012, 09:24 PM

Ide like to ask someone to do me a favor. For awhile I've suspected an electrical issue with my car. I've checked all fuses and plug ins,researched the net countless hours,checked ohms and volts per specs and I still feel I have an issues with my electrical system. Tonight after returning movies to the redbox I romped on her a bit and got side ways. 10 seconds later went to do it again and it just bucked and sputtered. So I got home ,popped the hood and grabbed the streamlight off the charger and just started looking close at everything. Found quite a few wiring harnesses seemed to be melted together. Not real noticable but stiff feeling like they have gotten hot at some point. The one that concerns me and caught my eye the most was the 3 wires the lead up to the fuel rail pressure sensor. All three has seemed to be melted together. Not enough to deform them very much but they are stuck together enough that i couldnt use my finger nails to pry them apart. I did get them apart using a razor knife and down to where they merge into the harness laying on top of valve covers. They was not any fusing of the wires down to that point and I ran out of time to go any further tonight. My favor is can anyone look at there's and tell me if this is factory for these wires to be sort of joined together like this or do I have a short somewhere like I'm thinking?

02NightRider · February 7th, 2012, 09:28 PM

UGH, Let me walk outside into my COLD ASS garage.

laoutlaw01 · February 7th, 2012, 09:31 PM

Originally Posted by 02NightRider

UGH, Let me walk outside into my COLD ASS garage.

Thanks man. Lol.

HighDensity · February 7th, 2012, 09:35 PM

Have picture of a blown up shot with the area circled then another shot of the wires in question?

Sorry my mind is too tired to think...

02NightRider · February 7th, 2012, 09:39 PM

If we are talking about the same wires. Then mine are not melted together. A picture of the place and then a picture of the wires like HD said would be great.

WickedSnake00 · February 7th, 2012, 09:56 PM

Yup.

And I'll help the best I can. Currently my GT harness is on my living room floor with the drivers side COP bank all ripped apart anyway.

I should probably finish that. The girlfriend is starting to complain.

laoutlaw01 · February 8th, 2012, 11:09 AM

Well I'm having to work what we call a Feild day today in the paper mill so i prolly wont get time today. Prolly have to pull 16 hours today. But its on the left side fuel rail. The little sensor that has 3 wires run into it and a vacumn line .

IsaidWOT · February 8th, 2012, 12:24 PM

I hate this left/right crap. Driver or Passenger? lol I might be able to take a pic of mine.

IsaidWOT · February 8th, 2012, 12:37 PM

Just ran out and used my phone to take a quick shot. Mine aren't melted together, but are wrapped.

laoutlaw01 · February 8th, 2012, 01:17 PM

Thank you. Sorry bout that but your right,drivers side. Helps a lot. Means I do have an electrical gremlin I gotta travel down .

IsaidWOT · February 8th, 2012, 01:24 PM

No problem man. Glad I could help.

February 7th, 2012, 09:24 PM	#1
laoutlaw01 Regular Join Date: Oct 2011 Posts: 381 iTrader: 0 reviews	a favor from 1 new edge owner to another. Ide like to ask someone to do me a favor. For awhile I've suspected an electrical issue with my car. I've checked all fuses and plug ins,researched the net countless hours,checked ohms and volts per specs and I still feel I have an issues with my electrical system. Tonight after returning movies to the redbox I romped on her a bit and got side ways. 10 seconds later went to do it again and it just bucked and sputtered. So I got home ,popped the hood and grabbed the streamlight off the charger and just started looking close at everything. Found quite a few wiring harnesses seemed to be melted together. Not real noticable but stiff feeling like they have gotten hot at some point. The one that concerns me and caught my eye the most was the 3 wires the lead up to the fuel rail pressure sensor. All three has seemed to be melted together. Not enough to deform them very much but they are stuck together enough that i couldnt use my finger nails to pry them apart. I did get them apart using a razor knife and down to where they merge into the harness laying on top of valve covers. They was not any fusing of the wires down to that point and I ran out of time to go any further tonight. My favor is can anyone look at there's and tell me if this is factory for these wires to be sort of joined together like this or do I have a short somewhere like I'm thinking? __________________

February 7th, 2012, 09:56 PM	#6
WickedSnake00 MM's king of Neon's 404 - car not found 17.81@87 Join Date: Aug 2010 Location: Diesel Engine Capital of the World, Columbus, IN Posts: 7,374 iTrader: 0 reviews	Yup. And I'll help the best I can. Currently my GT harness is on my living room floor with the drivers side COP bank all ripped apart anyway. I should probably finish that. The girlfriend is starting to complain. __________________ Official Secondhand Snake Build Thread Here Looks Like a Cobra, Sounds Like a Cobra, Tastes Like a Cobra, Not a Cobra. For Sale: P71 Interceptor motor

February 8th, 2012, 11:09 AM	#7
laoutlaw01 Regular Join Date: Oct 2011 Posts: 381 iTrader: 0 reviews	Well I'm having to work what we call a Feild day today in the paper mill so i prolly wont get time today. Prolly have to pull 16 hours today. But its on the left side fuel rail. The little sensor that has 3 wires run into it and a vacumn line . __________________

February 8th, 2012, 12:24 PM	#8
IsaidWOT Enthusiast 2002 Mustang GT Join Date: Nov 2011 Location: Grand Rapids, MI Posts: 806 iTrader: 0 reviews	I hate this left/right crap. Driver or Passenger? lol I might be able to take a pic of mine. __________________ 2002 Mustang GT \| Short Throw Shifter \| CAI \| 3.73 Gears \| Exedy Mach 400 Clutch

February 8th, 2012, 12:37 PM	#9
IsaidWOT Enthusiast 2002 Mustang GT Join Date: Nov 2011 Location: Grand Rapids, MI Posts: 806 iTrader: 0 reviews	Just ran out and used my phone to take a quick shot. Mine aren't melted together, but are wrapped. __________________ 2002 Mustang GT \| Short Throw Shifter \| CAI \| 3.73 Gears \| Exedy Mach 400 Clutch

February 7th, 2012, 09:28 PM	#2
02NightRider MM's Slowest Member :( 2002 Mustang GT Join Date: Dec 2011 Location: Maryland Posts: 905 iTrader: 0 reviews	UGH, Let me walk outside into my COLD ASS garage.

February 7th, 2012, 09:39 PM	#5
02NightRider MM's Slowest Member :( 2002 Mustang GT Join Date: Dec 2011 Location: Maryland Posts: 905 iTrader: 0 reviews	If we are talking about the same wires. Then mine are not melted together. A picture of the place and then a picture of the wires like HD said would be great.

February 8th, 2012, 01:17 PM	#10
laoutlaw01 Regular Join Date: Oct 2011 Posts: 381 iTrader: 0 reviews	Thank you. Sorry bout that but your right,drivers side. Helps a lot. Means I do have an electrical gremlin I gotta travel down . __________________

February 8th, 2012, 01:24 PM	#11
IsaidWOT Enthusiast 2002 Mustang GT Join Date: Nov 2011 Location: Grand Rapids, MI Posts: 806 iTrader: 0 reviews	No problem man. Glad I could help. __________________ 2002 Mustang GT \| Short Throw Shifter \| CAI \| 3.73 Gears \| Exedy Mach 400 Clutch

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: a favor from 1 new edge owner to another.
Thread	Thread Starter	Forum	Replies	Last Post
Prius owner vs Diesel owner.....( hopefully not a repost)	flatblack94	The Clubhouse	46	November 10th, 2011 11:46 AM
New Edge owner from Newnan, GA (with pics!)	Daniel Day	New Members Introductions	16	October 11th, 2011 11:01 PM
Have a Favor	futureMACH1racer	The Clubhouse	14	October 8th, 2010 12:29 PM
Do me a favor	JRCEngineering	The Clubhouse	5	August 6th, 2010 09:45 PM
Do me a favor??	Blondie99	The Clubhouse	31	October 4th, 2008 10:16 PM

All times are GMT -4. The time now is 04:13 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.